journal article·2021-06Open access

On the Application of Magnetoacoustic Emission for a Nondestructive Assessment of the Post Welding Heat Treatment of High Chromium Steel Weld Seams

L. Piotrowski, M. Chmielewski, G. Golański, K. Wojsyk

Abstract

Abstract The paper analyses the possibility of post weld heat treatment (PWHT) quality assessment with the help of magnetoacoustic emission (MAE) signal measurements. Two welded superheater tubes, made of high chromium VM12 steel, were analysed—as welded and heat treated one. The analysed sample in the as welded state exhibited significantly higher hardness, accompanied by a big difference in the MAE signal intensity (of order of about 50%). In order to explain that, the influence of tempering on the MAE signal intensity is demonstrated for the very similar X20CrMoV12.1 steel. It is shown that the observed increase of the MAE intensity as a function of annealing time is directly correlated with the change in hardness. The as described dependence allows to propose a method based on the MAE signal measurements as a new tool for the PWHT assessment.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Non-Destructive Testing Techniques · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Gao, Q., Di, X., Liu, Y., Yan, Z.: Recovery and recrystallization in modified 9Cr1Mo steel weldments after post-weld heat treatment. Int. J. Press. Vessels Pip. 93–94, 1–6 (2012). https://doi.org/10.1016/j.ijpvp.2012.03.00210.1016/j.ijpvp.2012.03.002 ↗
2. Rai, S., Jayakumar, T., Babu Rao, C., Bhattacharya, D.K., Raj, B.: Residual stress measurement in ferritic steel tube welds using X-ray diffraction. Sci. Technol. Weld. Join. 3(4), 204–207 (1998). https://doi.org/10.1179/stw.1998.3.4.20410.1179/stw.1998.3.4.204 ↗
3. Guo, J., Xu, X., Jepson, M.A.E., Thomson, R.C.: Influence of weld thermal cycle and post weld heat treatment on the microstructure of MarBN steel. Int. J. Press. Vessels Pip. 174, 13–24 (2019). https://doi.org/10.1016/j.ijpvp.2019.05.01010.1016/j.ijpvp.2019.05.010 ↗
4. Nebhnani, M.C., Bhakta, U.C., Gowrisankar, I., Biswas, D.: Failure of a martensitic stainless steel pipe weld in a fossil fuel power plant. Eng. Fail. Anal. 9, 277–286 (2002). https://doi.org/10.1016/S1350-6307(01)00019-X10.1016/S1350-6307(01)00019-X ↗
5. Rajaei, M., Elahi, S.H., Mashhadgarme, M.: A novel method for quality control of post weld heat treatment process using modal parameters. NDT&E Int. 111, 102216 (2020). https://doi.org/10.1016/j.ndteint.2020.10221610.1016/j.ndteint.2020.102216 ↗
6. Chertov, A.M., Maev, R.G., Severin, F.M.: Acoustic microscopy of internal structure of resistance spot welds. IEEE Trans. Ultrason. 54(8), 1521–1529 (2007). https://doi.org/10.1109/TUFFC.2007.42210.1109/TUFFC.2007.422 ↗
7. Harada, D., Sakai, K., Kiwa, T., Tsukada, T.: Analysis of the internal structure of a spot-weld by magnetic measurement, SINCE 2013. In: Proceedings of the Singapore International NDT Conference & Exhibition 2013, 19–20 July 2013 (2013)
8. Vertesy, G., Tomas, I.: Nondestructive magnetic inspection of spot welding. NDT&E Int. 98, 95–100 (2018). https://doi.org/10.1016/j.ndteint.2018.05.00110.1016/j.ndteint.2018.05.001 ↗
9. Tsukada, K., Yoshioka, M., Kiwa, T., Hirano, Y.: A magnetic flux leakage method using a magnetoresistive sensor for nondestructive evaluation of spot welds. NDT & E Int. 44, 101–105 (2011). https://doi.org/10.1016/j.ndteint.2010.09.01210.1016/j.ndteint.2010.09.012 ↗
10. Tsukada, K., Miyake, K., Harada, D., Sakai, K., Kiwa, T.: Magnetic nondestructive test for resistance spot welds using magnetic flux penetration end eddy current methods. J. Nondestruct. Eval. 32, 286–293 (2013). https://doi.org/10.1007/s10921-013-0181-010.1007/s10921-013-0181-0 ↗
11. Lord, A.E., Mason, W.P., Thurston, R.N. (eds.): Physical Acoustics, p. 290. Academic Press, New York (1975)
12. Shibata, M., Ono, K.: Magnetomechanical acoustic emission—a new method for non-destructive stress measurement. NDT Int. 14(5), 227–234 (1981). https://doi.org/10.1016/0308-9126(81)90075-410.1016/0308-9126(81)90075-4 ↗
13. Piotrowski, L., Augustyniak, B., Chmielewski, M., Labanowski, J., Lech-Grega, M.: Study on the applicability of the measurements of magnetoelastic properties for a nondestructive evaluation of thermally induced microstructure changes in the P91 grade steel. NDT&E Int. 47, 157–162 (2012). https://doi.org/10.1016/j.ndteint.2012.01.00710.1016/j.ndteint.2012.01.007 ↗
14. Piotrowski, L., Chmielewski, M., Kowalewski, Z.: On the application of magnetoelastic properties measurements for plastic deformation level evaluation. J. Electr. Eng. 69(6), 502–506 (2018). https://doi.org/10.2478/jee-2018-008610.2478/jee-2018-0086 ↗
15. Buttle, D.J., Briggs, G.A.D., Jakubovics, J.P., Little, E.A., Scruby, C.B.: Magnetoacoustic and Barkhausen emission in ferromagnetic materials. Philos. Trans. R. Soc. Lond. A 320, 363–378 (1986)10.1098/rsta.1986.0124 ↗
16. Piotrowski, L., Augustyniak, B., Chmielewski, M.: On the possibility of the application of magnetoacoustic emission intensity measurements for the diagnosis of thick-walled objects in the industrial environment. Meas. Sci. Technol. 21, 035702 (2010). https://doi.org/10.1088/0957-0233/21/3/03570210.1088/0957-0233/21/3/035702 ↗
17. Pešička, J., Kužel, R., Dronhofer, A., Eggeler, G.: The evolution of dislocation density during heat treatment and creep of tempered martensite ferritic steels. Acta Mater. 51, 4847–4862 (2003). https://doi.org/10.1016/S1359-6454(03)00324-010.1016/S1359-6454(03)00324-0 ↗
18. Augustyniak, B., Chmielewski, M., Piotrowski, L., Sablik, M.J.: Designing a magnetoacoustic emission measurement configuration for measurement of creep damage in power plant boiler tubes. J. Appl. Phys. 91(10), 8897–8899 (2002). https://doi.org/10.1063/1.145085110.1063/1.1450851 ↗
19. Maciakowski, P., Augustyniak, B., Chmielewski, M., Piotrowski, L.: Application of mechanical Barkhausen noise in assessment of X20 steel properties after heat treatment. J. Electr. Eng. 63(7s), 102–105 (2012)
20. Nakashima, K., Suzuki, M., Futamura, Y., Tsuchiyama, T., Takaki, S.: Limit of dislocation density and dislocation strengthening in iron. Mater. Sci. Forum 503–504, 627–632 (2006)10.4028/www.scientific.net/MSF.503-504.627 ↗
21. Sato, S., Wagatsuma, K., Suzuki, S., Kumagai, M., Imafuku, M., Tashiro, H., Kajiwara, K., Shobu, T.: Relationship between dislocations and residual stresses in cold-drawn pearlitic steel analyzed by energy-dispersive X-ray diffraction. Mater. Charact. 83, 152–160 (2013). https://doi.org/10.1016/j.matchar.2013.06.01710.1016/j.matchar.2013.06.017 ↗
22. Perevertov, O.: Describing the effect of tempering on hysteresis curves of 54SiCr6 spring steel by the effective field model. J. Magn. Magn. Mater. 324, 1645–1648 (2012). https://doi.org/10.1016/j.jmmm.2011.12.02910.1016/j.jmmm.2011.12.029 ↗
23. Herzer, G.: The random anisotropy model. In: Idzikowski, B., Švec, P., Miglierini, M. (eds.) Properties and Applications of Nanocrystalline Alloys from Amorphous Precursors NATO Science Series (Series II: Mathematics, Physics and Chemistry). Springer, Dordrecht (2005)
24. Chicazumi, S.: Physics of Ferromagnetism (The International Series of Monographs on Physics). Oxford University Press, Oxford (2009)
25. Monlevade, E.F., de Campos, M.F., Franco, F.A., Capo-Sanchez, J., Goldenstein, H., Padovese, L.R.: Magnetic barkhausen noise in quenched carburized nickel-steels. IEEE Trans. Magn. 48(4), 1465–1468 (2012). https://doi.org/10.1109/TMAG.2011.217366610.1109/TMAG.2011.2173666 ↗
26. Speich, G.R., Leslie, W.C.: Tempering of steels. Metall. Trans. 3, 1043–1054 (1972). https://doi.org/10.1007/BF0264243610.1007/BF02642436 ↗
27. De Freitas, D.A., Machado, I.G., Mazzaferro, J.A.E., Gonzalez, A.R., Mazzaferro, C.C.P.: Welding cooling rate effects on microstructure of an API 5l x100 steel. Int. J. Eng. Technol. 5(2), 51–57 (2016). https://doi.org/10.14419/ijet.v5i2.611310.14419/ijet.v5i2.6113 ↗
28. Messler, R.W., Jr.: Principles of Welding. WILEY-VCH Verlag GmbH & Co, Weinheim (2004)
29. Buttle, D.J., Little, E.A., Scruby, C.B., Briggs, G.A.D., Jakubovics, J.P.: A study of neutron-irradiation damage in alpha-iron with magnetoacoustic and Barkhausen emission. P. R. Soc. A-Math. Phys. 414(1846), 221–236 (1987). https://doi.org/10.1098/rspa.1987.014110.1098/rspa.1987.0141 ↗
30. Xu, Y.H., Ma, L., Du, F.M., Ma, X.Y., Ng, D.H.L.: Magnetoacoustic emission and Barkhausen noise of cobalt nickel oriented silicon steel and permalloy. J. Magn. Magn. Mater. 219(2), 166–172 (2000). https://doi.org/10.1016/S0304-8853(00)00416-910.1016/S0304-8853(00)00416-9 ↗
31. Piotrowski, L., Augustyniak, B., Chmielewski, M., Tomas, I.: The influence of plastic deformation on the magnetoelastic properties of the CSN12021 grade steel. J. Magn. Magn. Mater. 321(15), 2331–2335 (2009). https://doi.org/10.1016/j.jmmm.2009.02.02810.1016/j.jmmm.2009.02.028 ↗