journal article·2025-12Open access

Evaluation Metrics for Comparison between Virtual and Industrial XCT

Jessica Janczynski, Andreas Tewes, Alexander Ulbricht, Gerd-Rüdiger Jaenisch

Abstract

Abstract Simulations of XCT systems, as employed in the context of the manufacturing and design process, represent a time-saving, cost- and resource-efficient alternative to repeated experimental measurements. This article is dedicated to the development and evaluation of various metrics that should enable an adequate verification and optimization of a XCT simulation of an experimental XCT system. The present study employed statistical evaluation as a methodological approach. The present article makes a significant contribution to the optimization of the development process of a XCT simulation and provides a foundation for future research activities in this field.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced X-ray and CT Imaging · Digital Radiography and Breast Imaging · Industrial Vision Systems and Defect Detection

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Kadne, A., Kamath, P., Karvat, M., Bodkhe, M., Sharma, S.: A comprehensive study on industry 4.0 technologies. In: Bhardwaj, A., Pandey, P.M., Misra, A. (eds.) Optimization of Production and Industrial Systems, pp. 191–198. Springer, Singapore (2024)10.1007/978-981-99-8343-8_17 ↗
2. Murgod, T., Sundaram, S., Mahanthesha, U., Murugesan, P.: A survey of digital twin for industry 4.0: Benefits, challenges and opportunities. SN Computer Science. 5 (2023). https://doi.org/10.1007/s42979-023-02363-210.1007/s42979-023-02363-2 ↗
3. Mythily, M., David, B., Vijay, J.A.: In: Mishra, A., El Barachi, M., Kumar, M. (eds.) Digital Twin Application in Various Sectors, pp. 219–237. Springer, Cham (2024). https://doi.org/10.1007/978-3-031-58523-4_1110.1007/978-3-031-58523-4_11 ↗
4. Tiwari, S., Shukla, A.: In: Mishra, A., El Barachi, M., Kumar, M. (eds.) Digital Twins in Industry: Real-World Applications and Innovations, pp. 1–18. Springer, Cham (2024). https://doi.org/10.1007/978-3-031-58523-4_110.1007/978-3-031-58523-4_1 ↗
5. Vrana, J., Meyendorf, N., Ida, N., Singh, R.: Introduction to nde 4.0. In: Handbook of Nondestructive Evaluation 4.0, pp. 3–30. Springer, Cham (2022)10.1007/978-3-030-73206-6_43 ↗
6. Meyendorf, N., Ida, N., Singh, R., Vrana, J.: Handbook of Nondestructive Evaluation 4.0. Springer, Switzerland (2022). https://doi.org/10.1007/978-3-030-48200-810.1007/978-3-030-48200-8 ↗
7. Thompson, A., Maskery, I., Leach, R.K.: X-ray computed tomography for additive manufacturing: a review. Meas. Sci. Technol. 27(7), 072001 (2016)10.1088/0957-0233/27/7/072001 ↗
8. Khrapov, D., Koptyug, A., Manabaev, K., Léonard, F., Mishurova, T., Bruno, G., Cheneler, D., Loza, K., Epple, M., Surmenev, R., Surmeneva, M.: The impact of post manufacturing treatment of functionally graded ti6al4v scaffolds on their surface morphology and mechanical strength. J. Market. Res. 9(2), 1866–1881 (2020). https://doi.org/10.1016/j.jmrt.2019.12.01910.1016/j.jmrt.2019.12.019 ↗
9. Ulbricht, A., Mohr, G., Altenburg, S.J., Oster, S., Maierhofer, C., Bruno, G.: Can potential defects in lpbf be healed from the laser exposure of subsequent layers? a quantitative study. Metals. 11(7) (2021). https://doi.org/10.3390/met1107101210.3390/met11071012 ↗
10. Bellon, C., Deresch, A., Gollwitzer, C., Jaenisch, G.-R.: Radiographic Simulator aRTist: Version 2. In: Proceedings of the 18th WCNDT - World Conference on Nondestructive Testing, Durban, South Africa (2012)
11. Bellon, C., Deresch, A., Jaenisch, G.-R.: Radiography Simulation with aRTist - Combining Analytical and Monte Carlo Methods. In: Proceedings of DIR 2015 - International Symposium on Digital Industrial Radiology and Computed Tomography, Ghent, Belgium (2015)
12. Buzug, T.M.: Einführung in die Computertomographie. Springer, Berlin Heidelberg (2004). https://doi.org/10.1007/978-3-642-18593-910.1007/978-3-642-18593-9 ↗
13. Feldkamp, L.A., Davis, L.C., Kress, J.W.: Practical cone-beam algorithm. J. Opt. Soc. Am. A 1(6), 612–619 (1984)10.1364/JOSAA.1.000612 ↗
14. International Electrotechnical Commission (IEC): Medical electrical equipment – characteristics of digital x-ray imaging devices – part 1: Determination of the detective quantum efficiency. INTERNATIONAL STANDARD, IEC 62220-1, 262–267 (2015)
15. Deresch, A., Bellon, C., Jaenisch, G.-R.: A general spectrum model for x-ray generators. NDT & E International. 79(4), 92–97 (2016). https://doi.org/10.1016/j.ndteint.2015.12.00710.1016/j.ndteint.2015.12.007 ↗
16. National Nuclear Data Center: ENDF/B-VII.0 Homepage. https://www.nndc.bnl.gov/endf-b7.0/. Accessed 01 June 2024
17. Jaenisch, G.-R., Bellon, C., Samadurau, U., Zhukovskiy, M., Podolyako, S.V.: Monte Carlo radiographic model with CAD-based geometry description. Insight 48(10), 618–623 (2006). https://doi.org/10.1784/insi.2006.48.10.61810.1784/insi.2006.48.10.618 ↗
18. Bundesanstalt für Materialforschung und -prüfung (C. Bellon): aRTist Handbook. https://bamresearch.github.io/aRTist-handbook/index.html Accessed 01 June 2024
19. Butzhammer, L., Hausotte, T.: Complex 3D scan trajectories for industrial cone-beam computed tomography using a hexapod. Meas. Sci. Technol. 32, 1–15 (2021). https://doi.org/10.1088/1361-6501/ac08c410.1088/1361-6501/ac08c4 ↗
20. Orth, A. Bundesanstalt für Materialforschung und -prüfung, Berlin, private communication (2024)
21. Reuter, T., Oliveira, F.B., Abt, C., Ballach, F., Bartscher, M., Bellon, C., Dennerlein, F., Fuchs, P., Günnewig, O., Hess, J., Kasperl, S., Maass, N., Kimmig, W., Schielein, R., Schmid, M., Wagner, A.S.G., Watzl, C., Wohlgemuth, F., Hausotte, T.A.: Introduction to “Realistic Simulation of Real CT Systems with a Basic-qualified Simulation Software – CTSimU2”. In: Proceedings of the 12th Conference on Industrial Computed Tomography (iCT) (2023). https://doi.org/10.58286/2771510.58286/27715 ↗
22. mubeta06, M.: Ssim.py. https://github.com/mubeta06/python/blob/master/signal_processing/sp/ssim.py Accessed 06 Dec 2023
23. Jia, W., Zhang, H., He, X., Wu, Q.: A Comparison on Histogram Based Image Matching Methods. In: Proceedings of the IEEE International Conference on Video and Signal Based Surveillance, Sydney, Australia (2006)10.1109/AVSS.2006.5 ↗
24. Dosselmann, R., Yang, X.D., Bovik, A.C.: A comprehensive assessment of the structural similarity index. SIViP 5, 81–91 (2011). https://doi.org/10.1007/s11760-009-0144-110.1007/s11760-009-0144-1 ↗
25. Wang, Z., Simoncelli, E.P., Bovik, A.C.: Multi-Scale Structural Similarity for Image Quality Assessment. In: Proceedings of the 37th IEEE Asilomar Conference on Signals, Systems and Computers, Pacific Grove, CA, USA (2003)
26. Wang, Z., Lu, L., Bovik, A.C.: Video quality assessment based on structural distortion measurement. Signal Processing: Image Communication. 19(2), 121–132 (2004). https://doi.org/10.1007/s11760-009-0144-110.1007/s11760-009-0144-1 ↗
27. Carmignato, S., Dewulf, W., Leach, R., et al.: Industrial X-ray Computed Tomography, vol. 10. Springer, Cham (2018)10.1007/978-3-319-59573-3 ↗
28. Mitja, C., Escofet, J., Tacho, A., Revuelta, R.: Slanted Edge MTF - Second Version. https://imagej.net/ij/plugins/se-mtf/index.html Accessed 11 Jul 2024
29. Graphics, V.: VGSTUDIO MAX 2023.2. https://www.volumegraphics.com/de/produkte/software-release/version-2023-2.html Accessed 26 June 2024
30. Bundesanstalt für Materialforschung und -prüfung (C. Bellon): aRTist Homepage. https://artist.bam.de/ Accessed 01 June 2024