journal article·2012-03

Fabrication of novel multilayer Al2O3–(m-ZrO2)/t-ZrO2 fibrous ceramics composites

Swapan Kumar Sarkar, Byong Taek Lee

Ceramics International· Volume 38· Issue 2
Publisher page

Abstract

Abstract A novel layered microstructure in the Al2O3/ZrO2 composites system was fabricated by the multipass extrusion method. The microstructure consisted with very fine alternate lamina of Al2O3–(m-ZrO2) and t-ZrO2. The composites were designed in such a way that a small group of 7 cylindrical alternate layers of Al2O3–(m-ZrO2) and t-ZrO2 made a concentric microgroup around 40 μm in diameter, with a common boundary layer between the adjacent groups. The thickness of both layers was around 2–3 μm. The microstructure was unidirectionally aligned throughout the composites. The composite microstructure was fibrous due to the unidirectional orientation of these microgroups. Detailed microstructure of the fabricated composites was characterized by SEM. The effect of the concentric layered microstructure on mechanical behavior was discussed. Material properties such as density, bending strength, Vickers hardness and fracture toughness were measured and evaluated depending on different sintering temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Micro-indentation fracture behavior of Al2O3–24vol% ZrO2 (Y2O3) composites studied by transmission electron microscopy10.2320/matertrans1989.34.682 ↗
2. Crack growth resistance of alumina, zirconia and zirconia toughened alumina ceramics for joint prostheses10.1016/S0142-9612(01)00206-X ↗
3. Lawn · 1993
4. Microstructural design of toughened ceramics10.1111/j.1151-2916.1991.tb06872.x ↗
5. Powder processing science and technology for increased reliability10.1111/j.1151-2916.1989.tb05945.x ↗
6. Perspective on the development of high-toughness ceramics10.1111/j.1151-2916.1990.tb06493.x ↗
7. A simple way to make tough ceramics10.1038/347455a0 ↗
8. Enhanced fracture toughness in layered microcomposites of Ce–ZrO2 and Al2O310.1111/j.1151-2916.1991.tb04290.x ↗
9. Crack bifurcation in laminar ceramic composites10.1111/j.1151-2916.1996.tb08003.x ↗
10. Structure, nonlinear stress-strain state and strength of ceramic multilayered composites10.1016/j.compositesb.2006.02.009 ↗
11. Laminar ceramic composites10.1016/0955-2219(95)93055-8 ↗
12. ZrO2/ZrO2 layered composites for crack bifurcation10.1111/j.1151-2916.1999.tb01949.x ↗
13. Processing optimization and fracture behavior of layered ceramic composites with highly compressive layers10.1016/j.compscitech.2006.10.010 ↗
14. Effect of layer interfaces on the high-temperature mechanical properties of alumina/zirconia laminate composites10.1016/S1359-6454(00)00262-7 ↗
15. Tape casting of fine alumina/zirconia powders for composite fabrication10.1111/j.1151-2916.1994.tb07109.x ↗
16. Design of a laminated ceramic composite for improved strength and toughness10.1111/j.1151-2916.1992.tb04440.x ↗
17. Alumina and alumina/zirconia multilayer composites obtained by slip casting10.1111/j.1151-2916.1989.tb07692.x ↗
18. Functionally gradient ceramics by sequential slip casting10.1016/0167-577X(92)90048-O ↗
19. The preparation and properties of Al2O3–ZrO2 composites with corrugated microstructures10.1016/j.jeurceramsoc.2003.10.026 ↗
20. Structural ceramic microlaminates by electrophoretic deposition10.1111/j.1151-2916.1992.tb05531.x ↗
21. Crack deflection in ceramic/ceramic laminates with strong interfaces10.1111/j.1151-2916.1995.tb08455.x ↗
22. Layer orientation effects on the R-curve behavior of multilayered alumina–zirconia composites10.1016/j.compositesb.2006.02.021 ↗
23. Processing optimisation and fracture behaviour of layered ceramic composites with highly compressive layers10.1016/j.compscitech.2007.03.042 ↗
24. Finite element modeling and optimization for controlling the residual thermal stresses of laminated composite tubes10.1016/S0263-8223(98)00049-X ↗
25. Relationship between microstructures and material properties of novel fibrous Al2O3–(m-ZrO2)/t-ZrO2 composites10.1111/j.1551-2916.2005.00519.x ↗
26. Core/shell volume effect on the microstructure and mechanical properties of fibrous Al2O3–(m-ZrO2)/t-ZrO2 composite10.1016/j.msea.2006.06.058 ↗
27. Tunneling cracks in constrained layers10.1115/1.2900998 ↗
28. Biomaterial composites via colloidal rolling techniques: III. Mechanical properties10.1111/j.1151-2916.1999.tb02261.x ↗