Permeability of micropore carbon materials based on steady-state pore-scale flow calculations in real 2D and 3D microstructures
Source abstract
Abstract
Abstract Permeability of experimental micropore carbon material was investigated based on the solution of steady-state pore-scale flow in geometry representing real material pores in 2D and 3D. Geometries for calculations were created based on the X-ray micro-computed tomography measurements. A numerical solution of the velocity field and the Darcy equation allowed determining the permeability. Results obtained for 2D and 3D geometries were compared. A method of permeability measurements based on the Carman–Kozeny equation for real 2D and 3D microstructures was also investigated and compared with those obtained from the pore-scale flow.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Heat and Mass Transfer in Porous Media · Enhanced Oil Recovery Techniques · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. World Steel Association
2. Latest blast furnace relining technology at Nippon Steel
3. Wear mechanism for blast furnace hearth refractory lining10.1179/174328105X48160 ↗
4. A methodology to investigate the wear of blast furnace hearth carbon refractory lining10.1002/maco.201106390 ↗
5. Effect of carbon aggregates on the properties of carbon refractories for a blast furnace10.1007/s11663-009-9336-x ↗
6. Formation of porosity ad change in binder pitch properties during thermal treatment of green carbon materials10.1016/S0008-6223(96)00111-X ↗
7. Effect of temperature on the properties and microstructures of carbon refractories for blast furnace10.1007/s11661-009-9850-0 ↗
8. Sahimi · 2011
9. Comparison of X-ray micro-tomography measurements of densities and porosity principally to values measured by mercury porosimetry for carbon-carbon composites10.1016/j.carbon.2009.11.047 ↗
10. Investigation of porosity of carbon materials and related effects on gas separation properties10.1016/S0008-6223(02)00309-3 ↗
11. Characterization of carbon anode materials by image analysis
12. Contradicting geometrical concepts in pore size analysis attained with electron microscopy and mercury intrusion10.1111/j.1551-2916.2008.02736.x ↗
13. Characterization of prebaked anodes by micro X-ray computed tomography
14. Whitaker · 1986 · vol. 1 · 3
15. Evolution of the effective permeability for transient and pore-scale two-phase flow in real porous media10.1016/j.ijheatmasstransfer.2017.05.124 ↗
16. Permeability of unidirectional reinforcements for RTM10.1177/002199839202600802 ↗
17. Permeability of the porous Al2O3 ceramic with bimodal pore size distribution10.1016/j.ceramint.2018.12.064 ↗
18. Intrinsic permeability of refractories from gas permeability measurements : comparison of results10.1016/j.ceramint.2017.11.038 ↗
19. Permeability evolution during equiaxed dendritic solidification of Al-4.5 wt%Cu10.1088/0965-0393/20/3/035004 ↗
20. Pore-scale modeling of flow in particle packs containing grain-coating and pore-filling hydrates: verification of a Kozeny–Carman-based permeability reduction model10.1016/j.jngse.2017.06.019 ↗
21. Pore-scale processes that control dispersion of colloids in saturated porous media10.1029/2003WR002800 ↗
22. The Impact of Sub-resolution Porosity of X-Ray Microtomography Images on the Permeability10.1007/s11242-016-0690-2 ↗
23. Infiltration of liquid metals in porous compacts: modeling of permeabilities during reactive melt infiltration10.1023/A:1006574912165 ↗
24. Slow flow past periodic arrays of cylinders with application to heat transfer10.1016/0301-9322(82)90029-5 ↗
25. On the periodic fundamental solutions of the Stokes equations and their application to viscous flow past a cubic array of spheres10.1017/S0022112059000222 ↗
26. Permeability for cross flow through columnar-dendritic alloys10.1007/BF02654107 ↗
27. Permeability assessment by 3D interdendritic flow simulations on microtomography mappings of Al-Cu alloys10.1016/j.msea.2004.09.004 ↗
28. Characterization of transport phenomena in porous transport layers using X-ray microtomography10.1016/j.jpowsour.2017.03.153 ↗
29. Hierarchical tailoring of strut architecture to control permeability of additive manufactured titanium implants10.1016/j.msec.2013.05.050 ↗
30. Quantifying the effects of grain refiner addition on the solidification of Fe-rich intermetallics in Al–Si–Cu alloys using in situ synchrotron X-ray tomography
31. Coupling in situ synchrotron X-ray tomographic microscopy and numerical simulation to quantify the influence of intermetallic formation on permeability in aluminium – silicon – copper alloys q10.1016/j.actamat.2013.10.044 ↗
32. Microtomographic characterization of columnar Al-Cu dendrites for fluid flow and flow stress determination10.1016/j.msea.2007.10.093 ↗
33. Time-resolved synchrotron tomographic quantification of deformation-induced flow in a semi-solid equiaxed dendritic Al-Cu alloy10.1016/j.scriptamat.2015.03.011 ↗
34. Permeability of dual structured hypoeutectic aluminum alloys10.1016/j.actamat.2011.03.074 ↗
35. Numerical determination of permeability of Al–Cu alloys using 3D geometry from X-ray microtomography10.1179/174328409X411718 ↗
36. Physical and numerical characterization of the near-eutectic permeability of aluminum-copper alloys10.1016/j.actamat.2010.07.055 ↗
37. Modeling fluid flow in three-dimensional single crystal dendritic structures10.1016/j.actamat.2010.01.014 ↗
38. Fluid flow and defect formation in the three-dimensional dendritic structure of nickel-based single crystals10.1007/s11661-011-0823-8 ↗
39. A new numerical model for pore scale dissolution of calcite due to CO2 saturated water flow in 3D realistic geometry: principles and first results10.1016/j.chemgeo.2009.05.004 ↗
40. Effects of pore-scale precipitation on permeability and flow10.1016/j.advwatres.2015.11.013 ↗
41. Assessing the carbon sequestration potential of basalt using X-ray micro-CT and rock mechanics10.1016/j.ijggc.2017.12.008 ↗
42. Non-destructive investigations of pore morphology of micropore carbon materials10.1016/j.ceramint.2018.11.006 ↗
43. Cobex Group
44. Practical one-beam algorithm10.1364/JOSAA.1.000612 ↗
45. A high-level 3D visualization API for Java and ImageJ10.1186/1471-2105-11-274 ↗
46. Image processing with imageJ
47. MeshLab: an open-source mesh processing tool
48. Rappaz · Numerical Modeling in Materials Science and Engineering · 2010
49. Thermophysical properties and structure of liquid Fe-C alloys
50. The density of liquid iron-carbon alloys10.1007/BF02657866 ↗
51. Dorfman · 2013
52. Quarteroni · 2000