Ion substitution induced formation of spherical ceramic particles

Abstract How to precipitate ceramic nano- and microspheres in water based solutions only using inorganic ions is a challenge. In this study, spherical particles of alkaline earth phosphates and fluorides were synthesized using a precipitation reaction. Substituting ions, through inhibition of crystal growth, was used to induce sphere formation and to alter the morphology, size and composition of the spheres. The difference in ionic radius between the substituting ion (Mg, Ca and Sr) and the main cation (Sr and Ba) influenced the critical concentration to allow for sphere formation as well as the crystallinity. The larger difference, the lower was the concentration needed to form spheres. Low concentrations of Mg was enough to generate amorphous spheres of Sr- and Ba-phosphates whereas higher concentrations were needed if the radius difference were smaller. An increasing degree of substitution leads to a decrease in crystallinity of precipitated particles. The degree of substitution was determined to 16–55% where a low degree of ion substitution in the phosphates resulted in the formation of spheres (500–800 nm) with rough surfaces composed of apatite like phases. A higher degree of substitution resulted in amorphous spheres (500 nm- 1 μm) with smooth surfaces.