Ti-based nanocoatings on Al2O3 powders
Source abstract
Abstract
Ti-based nanocoatings on ceramic powders were successfully fabricated by heterogeneous precipitation method. Commercial Al2O3 (average particle size of 0.5 mm), titanium tetrabutoxide (Ti(C4H9O)4) and urea (CO(NH2)2) have been used as starting materials. Selecting appropriate precipitation conditions, both the thickness and the uniformity of Ti-based nanocoatings were adjusted.With a molar ratio TiO2/Al2O3 = 0.05 and the use of urea in excess, a homogeneous nanocoating of 20 nm on the alumina powder surface was attained. FTIR spectra indicated the formation of the TiO2-based nanocoating onto Al2O3 particles and TEM examinations showed that the amorphous coating layer crystallized to <10 nm TiO2 particles upon calcination at 500 8C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Electrophoretic Deposition in Materials Science · Catalysis and Hydrodesulfurization Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Template synthesis of uniform 1D mesostructured silica materials and their arrays in anodic alumina membranas10.1002/anie.200250808 ↗
2. Hollow capsule processing through colloidal templating and self-assembly10.1002/(SICI)1521-3765(20000204)6:3<413::AID-CHEM413>3.0.CO;2-9 ↗
3. Hollow titania spheres from layered precursor deposition on sacrificial colloidal core particles10.1002/1521-4095(200105)13:10<740::AID-ADMA740>3.0.CO;2-6 ↗
4. Fabrication of NiO nanoparticle-coated lead zirconate titanate powders by the heterogeneous precipitation method10.1111/j.1151-2916.2003.tb03531.x ↗
5. Fabrication and dielectric properties of lanthanum-modified lead zirconate titanate using coprecipitation powder coating10.1016/j.matlet.2004.04.004 ↗
6. Particulate composites from coated powders10.1016/0955-2219(91)90057-7 ↗
7. Synthesis of uniform anatase TiO2 nanoparticles by gel–sol method. 3. Formation process and size control10.1016/S0021-9797(03)00036-5 ↗
8. Photocatalytic characteristics of nanometer-sized titania powders fabricated by a homogeneous-precipitation process10.1111/j.1151-2916.2002.tb00094.x ↗
9. Hydrothermal synthesis of nanosized titania powders: influence of tetraalkyl ammonium hydroxides on particle characteristics10.1111/j.1151-2916.2001.tb00901.x ↗
10. Titania from nanoclusters to nanowires and nanoforks10.1140/epjd/e2003-00172-y ↗
11. The generation of nanoparticles in miniemulsions10.1002/1521-4095(200105)13:10<765::AID-ADMA765>3.0.CO;2-F ↗
12. Nanoparticle packaging10.1002/1527-2648(20020717)4:7<494::AID-ADEM494>3.0.CO;2-X ↗
13. Effects of sol properties and calcination on the performance of titania tubular membranes10.1016/S0376-7388(00)00369-0 ↗
14. Gold nanoparticles as templates for the synthesis of hollow nanometer-sized conductive polymer capsules10.1002/(SICI)1521-4095(199901)11:1<34::AID-ADMA34>3.0.CO;2-I ↗
15. Preparation of Al/TiO2 nanometer photo-catalyst film and the effect of H2O addition on photo-catalytic performance for benzene removal10.1016/S0926-860X(03)00542-8 ↗
16. Synthesis of thermally stable nanocrystalline anatase by high-temperature hydrolysis of titanium alkoxide with water dissolved in organic solvent from gas phase10.1007/BF00274449 ↗
17. Preparation of TiO2 nanoparticles in glycerol-containing solutions10.1016/S0167-577X(02)01369-1 ↗