Microstructural variation and dielectric properties of KTiNbO5 and K3Ti5NbO14 ceramics
Source abstract
Abstract
Abstract KTiNbO 5 (KTN) and K 3 Ti 5 NbO 14 (3K5TN) ceramics sintered at 1150 °C and 1125 °C, respectively, exhibited a dense, homogeneous microstructure with a high relative density (≥96% of the theoretical density). Abnormal grain growth occurred in both specimens during sintering, and large (002) and (001) grains developed in KTN and 3K5TN ceramics, respectively. A dielectric constant ( e r ) of 13 and a dielectric loss of 2.9% at 10 MHz were obtained from KTN ceramics sintered at 1150 °C. The 3K5TN ceramics sintered at 1125 °C showed an e r of 15 and a dielectric loss of 12% at 10 MHz. The resistivity of KTN and 3K5TN ceramics was low and their e r and dielectric loss values displayed low-frequency dispersion (LFD); the presence of K + ions between the layers could be responsible for their low resistivity and LFD.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Dielectric properties of ceramics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. High-dielectric constant thin films for dynamic random access memories (DRAM)10.1146/annurev.matsci.28.1.79 ↗
2. Physics of thin-film ferroelectric oxides10.1103/RevModPhys.77.1083 ↗
3. Synthesis of highly tetragonal BaTiO3 nanopowders by a two-step alkoxide-hydroxide route10.1016/j.jallcom.2011.06.052 ↗
4. Deposition of extremely thin (Ba, Sr)TiO3 thin films for ultra-large-scale integrated dynamic random access memory application10.1063/1.114795 ↗
5. Development of dielectric properties of niobium oxide, tantalum oxide, and aluminum oxide based nanolayered materials10.1149/1.1343106 ↗
6. Rutile-type TiO2 thin film for high-k gate insulator10.1016/S0040-6090(02)01105-7 ↗
7. High-k gate dielectrics: current status and materials properties considerations10.1063/1.1361065 ↗
8. Perovskites by design: a Toolbox of solid-state reaction10.1021/cm010689m ↗
9. Self-assembly of tiled perovskite monolayer and multilayer thin films10.1021/cm0004073 ↗
10. Macromolecular nanoplatelet of aurivillius-type layered perovskite oxide, Bi4Ti3O1210.1021/cm0102436 ↗
11. Controlled polarizability of one-nanometer-thick oxide nanosheets for tailored, high-k nonodielectrics10.1002/adfm.201100580 ↗
12. Construction of highly ordered lamellar nanostructures through Langmuir–Blodgett deposition of molecularly thin titania nanosheets tens of micrometers wide and their excellent dielectric properties10.1021/nn900104u ↗
13. Robust high-k response in molecularly thin perovskite nanosheets
14. Uchino · 2000
15. Dielectric properties of the lamellar nionates and titanoniobates AM2Nb3O10 and ATiNbO5 (A=H, K, M=Ca, Pb), and their condensation products Ca4Nb6O19 and Ti2Nb2O910.1021/cm981065s ↗
16. Effect of porosity and grain size on the microwave dielectric properties of sintered alumina10.1111/j.1151-2916.1997.tb03066.x ↗
17. The morphology of α-Al2O3 and α-Fe2O3: the importance of surface relaxation10.1016/0022-0248(87)90093-5 ↗
18. Classical and quantum simulation of the surface properties of α-Al2O310.1098/rsta.1992.0103 ↗
19. Dielectric relaxation in solids10.1088/0022-3727/32/14/201 ↗
20. Kingery · 1976