Selective Laser Sintering versus Multi Jet Fusion: A Comprehensive Comparison Study Based on the Properties of Glass Beads‐Reinforced Polyamide 12
Source abstract
Abstract
Selective laser sintering (SLS) and multi jet fusion (MJF) are the most widespread powder bed fusion additive manufacturing techniques for fabricating polymeric parts since they offer great design flexibility, productivity, and geometrical accuracy. However, these technologies differ in the thermal energy source used to melt the powders as well as the innovative use of printing agents featured in the latter one to promote material consolidation and to avoid thermal bleeding at the part contours. The use of a single powder made of glass beads‐reinforced polyamide 12 (PA12/GB) for the fabrication of MJF and SLS samples makes possible a systematic comparison of the printed parts properties. A thoughtful analysis of the microstructure and mechanical properties of the samples reveals differences and peculiarities between the two technologies. SLS exhibits lower porosity and higher mechanical performances when the parts are printed along the build plane thanks to the powerful heating ensured by the laser. In contrast, MJF samples show higher mechanical isotropy with great flexural and tensile behavior for vertically oriented parts. The role of glass beads in the material behavior is defined by their mechanical properties, meaning higher rigidity and lower strength compared to neat PA12, and fracture mechanism.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Additive Manufacturing Materials and Processes · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Applied Science and Technology Politecnico di Torino Corso Duca degli Abruzzi 24 10129 Torino Italy
Centro Ricerche Fiat Stellantis Strada Torino 50 10043 Orbassano Italy
Stellantis Prototype & Pilot Operation Via Biscaretti di Ruffia 90/A 10135 Torino Italy
References (64)
Show source-provided references
1. 10.1016/j.progpolymsci.2019.03.00310.1016/j.progpolymsci.2019.03.003 ↗
2. BS EN ISO/ASTM 52900:2021 Additive Manufacturing – General Principles – Fundamentals and Vocabulary British Standards Institution2021 p.38.
3. Campbell I. · 2022
4. 10.3390/ma1501018310.3390/ma15010183 ↗
5. 10.1016/j.progpolymsci.2018.11.00110.1016/j.progpolymsci.2018.11.001 ↗
6. Goodridge R. · 2017 · 18110.1016/B978-0-08-100433-3.00007-5 ↗
7. Hewlett‐Packard Inc. HP Multi Jet Fusion Technology ‐ A Disruptive 3D Printing Technology for a New Era of Manufacturing ‐ Technical White Paper Palo Alto CA USA 2018.
8. C.Fleischmann R.Donovan S. R.Woodruff Y.Feng Three‐Dimensional (3D) Printing 2019 WO 2019/099031 A1.
9. 10.1007/s00706-020-02646-x10.1007/s00706-020-02646-x ↗
10. 10.1016/j.jmapro.2019.07.01410.1016/j.jmapro.2019.07.014 ↗
11. EOS GmbH Electro Optical Systems FORMIGA P 110 Velocis Krailling DE2022.
12. 10.1016/j.addma.2019.02.00410.1016/j.addma.2019.02.004 ↗
13. Hewlett‐Packard Inc. HP Jet Fusion 5200 Series 3D Printing Solutions Palo Alto CA USA2019.
14. 10.1016/j.addma.2018.05.03510.1016/j.addma.2018.05.035 ↗
15. 10.1016/j.jmapro.2019.03.00410.1016/j.jmapro.2019.03.004 ↗
16. 10.1016/j.jmapro.2021.08.01210.1016/j.jmapro.2021.08.012 ↗
17. 10.1002/adem.20227003310.1002/adem.202270033 ↗
18. 10.1080/17452759.2022.204647810.1080/17452759.2022.2046478 ↗
19. 10.1016/j.jmapro.2021.08.03610.1016/j.jmapro.2021.08.036 ↗
20. Riedelbauch J. · Addit. Manuf. · 2019 · 27 · 259
21. 10.1016/j.jmapro.2020.06.02910.1016/j.jmapro.2020.06.029 ↗
22. Mele M. · Addit. Manuf. · 2019 · 30 · 100879
23. 10.1108/RPJ-04-2020-008010.1108/RPJ-04-2020-0080 ↗
24. 10.1016/j.polymer.2021.12425610.1016/j.polymer.2021.124256 ↗
25. 10.1016/j.addma.2020.10171310.1016/j.addma.2020.101713 ↗
26. 10.1016/j.jmatprotec.2020.11688210.1016/j.jmatprotec.2020.116882 ↗
27. 10.1016/j.jmapro.2021.03.01810.1016/j.jmapro.2021.03.018 ↗
28. 10.1016/j.addma.2018.06.02810.1016/j.addma.2018.06.028 ↗
29. 10.1016/j.addma.2019.10096110.1016/j.addma.2019.100961 ↗
30. 10.1080/17452759.2021.189946310.1080/17452759.2021.1899463 ↗
31. Sharebot S.r.l. https://www.sharebot.it/stampanti/snowwhite-2/#technical-details(accessed: March 2023).
32. Hewlett‐Packard Inc., · 2019
33. 10.1108/RPJ-07-2020-018010.1108/RPJ-07-2020-0180 ↗
34. 10.1016/j.pmatsci.2011.04.00110.1016/j.pmatsci.2011.04.001 ↗
35. 10.1016/j.addma.2021.10225010.1016/j.addma.2021.102250 ↗
36. 10.1016/j.addma.2021.10195710.1016/j.addma.2021.101957 ↗
37. 10.1016/j.compscitech.2011.08.01310.1016/j.compscitech.2011.08.013 ↗
38. F.‐E.Baumann N.Wilczok Preparation of Precipitated Polyamide Powders of Narrow Particle Size Distribution and Low Porosity US 5932689 1999.
39. H.Scholten W.Christoph Use of a Nylon‐12 for Selective Laser Sintering US 6245281 B1 2001.
40. 10.3390/app705046210.3390/app7050462 ↗
41. 10.1016/j.eurpolymj.2017.05.01410.1016/j.eurpolymj.2017.05.014 ↗
42. 10.1016/j.eurpolymj.2015.12.01410.1016/j.eurpolymj.2015.12.014 ↗
43. L.Danilo Materiali Polimerici per l’Additive Manufacturing: Caratteristiche Precursori e Prestazioni Meccaniche Dei Prodotti Polytechnic of Turni2018.
44. Hewlett‐Packard Inc. HP 3D High Reusability PA 12 Glass Beads Palo Alto CA USA 2019.
45. 10.1016/j.msea.2011.05.04510.1016/j.msea.2011.05.045 ↗
46. 10.1016/j.engfracmech.2018.07.03510.1016/j.engfracmech.2018.07.035 ↗
47. 10.1016/j.addma.2018.04.01910.1016/j.addma.2018.04.019 ↗
48. 10.1016/j.addma.2021.10220510.1016/j.addma.2021.102205 ↗
49. 10.1080/17452759.2022.205963810.1080/17452759.2022.2059638 ↗
50. Lee K. P. M. · Addit. Manuf. · 2020 · 36 · 101533
51. 10.1108/RPJ-08-2018-022010.1108/RPJ-08-2018-0220 ↗
52. 10.1016/j.polymertesting.2018.03.03510.1016/j.polymertesting.2018.03.035 ↗
53. 10.3390/polym1305081010.3390/polym13050810 ↗
54. 10.1016/j.msea.2006.07.08410.1016/j.msea.2006.07.084 ↗
55. 10.1016/j.polymertesting.2018.05.04510.1016/j.polymertesting.2018.05.045 ↗
56. 10.1007/s00216-009-3169-y10.1007/s00216-009-3169-y ↗
57. 10.1016/j.aiepr.2021.05.00210.1016/j.aiepr.2021.05.002 ↗
58. Josupeit S. · Addit. Manuf. · 2016 · 12 · 189
59. 10.1016/j.measurement.2015.02.05710.1016/j.measurement.2015.02.057 ↗
60. 10.1515/polyeng-2017-022710.1515/polyeng-2017-0227 ↗
61. 10.1016/j.polymertesting.2013.04.01410.1016/j.polymertesting.2013.04.014 ↗
62. 10.1016/j.crme.2018.08.00210.1016/j.crme.2018.08.002 ↗
63. 10.1016/j.compositesb.2013.12.01710.1016/j.compositesb.2013.12.017 ↗
64. 10.3390/polym1011120810.3390/polym10111208 ↗