Effect of ball milling and solid solution treatment on the microstructure and interfacial behaviors of ZrMgMo3O12p/2024Al composites
Source abstract
Abstract
ZrMgMo 3 O 12 is a negative expansion material, while 2024Al alloy is a positive expansion material. The difference in thermal expansion coefficients between them will cause thermal mismatch stress at the interface in ZrMgMo 3 O 12p /2024Al composites. Therefore, the interface behaviors of ZrMgMo 3 O 12 –Al determine the properties of ZrMgMo 3 O 12p /2024Al composites to a great extent. The effects of ball milling and solid solution treatment on the microstructure and interface behaviors of 10 vol% ZrMgMo 3 O 12p /2024Al composites were studied to improve the reticular microstructure of ZrMgMo 3 O 12 distributed at the grain boundary of the α-Al matrix. The results showed that with increasing milling energy, the microstructure of the composites changed from reticular to equiaxed, and the distribution of ZrMgMo 3 O 12 reinforcements in the matrix was more uniform. The content and size of the primary phase Al 2 Cu decreased with increasing solid solution treatment time. In addition, only ZrMgMo 3 O 12 –Al, Al 2 Cu–Al 12 Mo and Al–Al 12 Mo interfaces can be observed, but it is difficult to observe the interfaces of ZrMgMo 3 O 12 –Al 12 Mo in the composites milled for 12 h and solution treated for 24 h, which is related to the decomposition mechanism of ZrMgMo 3 O 12 . The decomposition mechanism is as follows: Al atoms from the α-Al matrix captured O atoms from ZrMgMo 3 O 12 to form Al 2 O 3 . ZrMgMo 3 O 12 simultaneously released Mo, Zr and Mg atoms. Mo atoms were enriched and nucleated in situ and precipitated with Al atoms to form the intermetallic compound Al 12 Mo, while Zr and Mg atoms entered the α-Al matrix to form a solid solution.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Thermal Expansion and Ionic Conductivity · Magnetic Properties of Alloys · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Multi-functional SiC/Al composites for aerospace applications10.1016/S1000-9361(08)60177-6 ↗
2. Processing of Al/SiC composites in continuous solid-liquid co-existent state by SPS and their thermal properties10.1016/j.compositesb.2012.02.004 ↗
3. Microstructure and thermal conduction property of SiCp/Al-Si composite with high reinforcement content
4. Aging behavior of high volume fraction SiC particles reinforced 2024Al composite
5. Mechanical properties of SiC/Gr/Al composites fabricated by squeeze casting technology10.1016/j.scriptamat.2008.05.018 ↗
6. Thermal expansion studies on aluminium-matrix composites with different reinforcement architecture of SiC particles10.1016/j.compscitech.2005.12.012 ↗
7. Effect of heat-treatment on stress relief and dimensional stability behavior of SiCp/Al composite with high SiC content10.1016/j.matdes.2015.07.044 ↗
8. Thermal expansion and mechanical properties of middle reinforcement content SiCp/Al composites fabricated by PM technology10.1007/s11595-014-0975-7 ↗
9. Machining of Al/SiC particulate metal matrix composites : Part II: workpiece surface integrity10.1016/S0924-0136(98)00072-7 ↗
10. Zero thermal expansion in ZrMgMo3O12: NMR crystallography reveals origins of thermoelastic properties10.1021/acs.chemmater.5b00429 ↗
11. A negative thermal expansion material of ZrMgMo3O1210.1088/0256-307X/30/12/126502 ↗
12. Investigation on the synthesis and the mechanical and thermal expansion properties of ZrMgMo3O12 ceramic bodies10.1016/j.ceramint.2019.01.199 ↗
13. Electrical properties of Al-ZrMgMo3O12 with controllable thermal expansion10.1016/j.ceramint.2014.10.048 ↗
14. Effect of sintering temperature on the thermal expansion behavior of ZrMgMo3O12p/2024Al composite10.1016/j.ceramint.2018.03.110 ↗
15. Influence of high-energy milling and heat treatment on the thermal and mechanical properties of a ZrMgMo3O12p/2024Al composite10.1016/j.ceramint.2019.04.047 ↗
16. Influence of ball milling process on microstructure, mechanical and thermal expansion properties of ZrMgMo3O12/Al-40Si composites10.1016/j.micron.2022.103245 ↗
17. Effects of in situ generated ZrB2 nano-particles on microstructure and tensile properties of 2024Al matrix composites10.1016/j.jallcom.2014.01.117 ↗
18. Synthesis of B4C, Al2O3, and AlB12 reinforced Al matrix nano composites via mechanochemical method10.1177/0021998311430867 ↗
19. Modified scherrer equation to estimate more accurately nano-crystallite size using XRD10.4236/wjnse.2012.23020 ↗
20. The Al-Mo system (aluminum-molybdenum)10.1007/s11669-997-0063-1 ↗