journal article·2021-02

Evolution of precursor powders prepared by oxalate freeze drying towards high performance Bi-2212 wires

L.H. Jin, G.Q. Liu, X.Y. Xu, G.F. Jiao, H.L. Zheng, Q.B. Hao, S.N. Zhang, C.S. Li, P.X. Zhang

Ceramics International· Volume 47· Issue 3
Publisher page

Abstract

Abstract Bi2Sr2CaCu2Ox (Bi-2212) precursor powders were synthesized by the oxalate freeze drying (OFD) method. In comparison with the traditional method, the novel method could shorten the processing steps and thus improve the fabrication efficiency of precursor powder. The phase, microstructure and superconducting properties of Bi-2212 precursor powders and wires were characterized by X-ray diffraction, scanning electron microscopy and four-probe method, respectively. The thermal behavior, surface area and particle size of powders were also discussed. The results indicated that large surface area and small particle size might improve the reactivity and uniformity of powders. These properties were beneficial for the rapid and homogeneous formation of Bi-2212. High-purity crystallized Bi-2212 powders without Bi-2201 and alkaline-earth cuprates phases could be achieved. Furthermore, multi-filamentary Bi-2212 wires with OFD powders showed good microstructures without noticeable pores and large secondary particles. Therefore, high engineering critical current densities (Je) of 1619 A/mm2 and critical current densities (Jc) of 7039 A/mm2 were obtained in Bi-2212 wires at 4.2K, self field. It indicated that the oxalate freeze drying method would be a potential candidate for the mass production of high performance Bi-2212 wires.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Physics of Superconductivity and Magnetism · Superconducting Materials and Applications · Superconductivity in MgB2 and Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Isotropic round-wire multifilament cuprate superconductor for generation of magnetic fields above 30 T10.1038/nmat3887 ↗
2. Bi-2212 round wire development for high field applications
3. Tripled critical current in racetrack coils made of Bi-2212 Rutherford cables with overpressure processing and leakage control10.1088/1361-6668/aada2f ↗
4. Comparison of growth texture in round Bi2212 and flat Bi2223 wires and its relation to high critical current density development10.1038/srep08285 ↗
5. On the role of precursor powder composition in controlling microstructure, flux pinning, and the critical current density of Ag/Bi2Sr2CaCu2Ox conductors10.1088/1361-6668/30/3/035004 ↗
6. Influence of precursor calcination parameters on the critical current density of Bi-2212 superconductors10.1016/j.physc.2005.11.017 ↗
7. Significant improvement in superconductivity by substituting Pb at Bi-site in Bi2-xPbxSr2CaCu2O8 with x = 0.0 to 0.4010.1007/s10948-009-0622-2 ↗
8. Partial melt processing of high-Tc bulk Bi-2212 starting from different precursor powders10.1088/1742-6596/97/1/012313 ↗
9. The influence of carbon on the melt processing Ag sheathed Bi2Sr2CaCu2O8 Tape10.1016/0921-4534(94)90065-5 ↗
10. Development of Bi-2212 conductors for magnet applications10.1063/1.1774620 ↗
11. Studies of precursor composition effect on Jc in Bi-2212/Ag wires and tapes10.1063/1.2192409 ↗
12. High-performance Bi2212/Ag tape produced at NEXANS
13. Manufacture of specific BSCCO powder compositions by co-precipitation10.1016/0921-4534(95)00201-4 ↗
14. Reactive field assisted sintering of freeze dried powders in the BSCCO system10.1088/0953-2048/15/1/307 ↗
15. The fabrication of fine and homogenous Bi-2223 precursor powder by a spray pyrolysis process10.1088/0953-2048/17/9/016 ↗
16. Continuous processing of Bi2Sr2CaCu2O8+δ precursor powders10.1016/j.ceramint.2018.05.120 ↗
17. Synthesis of Bi2Sr2CaCu2Ox superconductors via direct oxidation of metallic precursors10.1088/0953-2048/27/5/055016 ↗
18. High-performance Bi-2212 round wires made with recent powders10.1109/TASC.2019.2895197 ↗
19. Preparation and characterization of large-quantity Bi-2223 precursor powder by oxalate coprecipitation10.1109/TASC.2016.2583778 ↗
20. Effect of high-temperature vacuum degassing on microstructure and current-carrying capacity of the Bi-2212 wire10.1016/j.jallcom.2018.01.375 ↗
21. Approximation to the laser floating zone preparation of high temperature BSCCO superconductors by DSC10.1016/S0040-6031(03)00354-X ↗
22. Multiscale studies of processing microstructure- transport relationships in over- pressure processed Bi2Sr2CaCu2Ox/Ag multifilamentary round wire10.1088/0953-2048/27/11/115002 ↗