journal article·2019-12

Strengthening mechanism of surface-modified SiCp/Al composites processed by the powder-in-tube method

H.T. Gao, X.H. Liu, J.L. Qi, J.Q. Chen, Z.R. Ai

Ceramics International· Volume 45· Issue 17
Publisher page

Abstract

Abstract The powder-in-tube method was used to investigate the strengthening mechanism of surface-modified SiCp/Al composites at room temperature. A typical amorphous Al2O3 layer was formed for the untreated SiCp/Al composite (CUSiC). Obvious interfacial cracks were generated in the pre-oxidized SiCp/Al composite (COSiC), because of the insufficient activation energy for the reaction between SiO2 and Al. Comparatively, the interfacial strength of the Cu-coated SiCp/Al composite (CCu-SiC) was significantly enhanced by the formation of the CuAl2 phase. The composite reinforced by the low content Cu-coated SiC (6 wt%) exhibiting an ultimate strength of 196 MPa (+ 50.7% compared to the Al matrix) was processed by the low-speed and short-time ball milling process followed by the pack rolling at room temperature. For CUSiC, load transfer and grain refinement were the main strengthening mechanism. While for CCu-SiC, the precipitation strengthening of tiny CuAl2 phase (0.6 vol.%) contributed to ~77% to the total strength increase.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Mechanical behavior of particle reinforced metal matrix composites10.1002/1527-2648(200106)3:6<357::AID-ADEM357>3.0.CO;2-I ↗
2. Fundamental study of SiCp/Al composites in electronic packaging applications
3. Extrusion textures in Al, 6061 alloy and 6061/SiCp nanocomposites10.1016/j.matchar.2013.11.009 ↗
4. Effects of SiCp size on tensile property of aluminum matrix composites fabricated by powder metallurgical method
5. Study on the pressureless infiltration process of the SiCp/Al composites
6. Particle reinforced aluminum and magnesium matrix composites10.1179/imr.1994.39.1.1 ↗
7. Particulate reinforced metal matrix composites10.1007/BF00544448 ↗
8. Molecular-dynamics simulation of Al/SiC interface structures10.1103/PhysRevB.59.10125 ↗
9. Temperature-dependent Young's modulus of an SiCw/Al2O3 composite10.1007/BF00356348 ↗
10. Interfacial microstructure evolution in aluminum matrix composites reinforced with unoxidized and oxidized SiC particles10.1002/sia.1064 ↗
11. Effect of improved interface on mechanic properties of SiC particles reinforced aluminum matrix composites
12. Preparation and characterization of Cu coated SiC composite powders by in-situ chemical deposition10.3724/SP.J.1077.2012.11575 ↗
13. Graphene reinforced metal and ceramic matrix composites: a review10.1080/09506608.2016.1219481 ↗
14. Balanced strength and ductility in CNT/Al composites achieved by flake powder metallurgy via shift-speed ball milling10.1016/j.compositesa.2017.02.017 ↗
15. Nonstoichiometric interfaces an Al2O3 adhesion with Al and Ag10.1103/PhysRevLett.85.3225 ↗
16. Quantitative analysis of alcohol concentration on the surface of SiC
17. SiC particles and their interfacial behavior in SiCp/ZL 109 composites
18. Enhanced mechanical properties of graphene (reduced graphene oxide)/aluminum composites with a bioinspired nanolaminated structure10.1021/acs.nanolett.5b03492 ↗
19. Uniform dispersion and interface analysis of nickel coated graphene nanoflakes/pure titanium matrix composites10.1016/j.carbon.2018.05.013 ↗
20. Interface evolution and superior tensile properties of multi-layer graphene reinforced pure Ti matrix composite10.1016/j.matdes.2017.12.016 ↗
21. On the strength of discontinuous silicon carbide reinforced aluminum composites
22. The relationship between abnormal growth of austenite grain and non-uniformity factor
23. Strengthening mechanism of micrometer SiC particle reinforced aluminum matrix composites
24. Friction stir processing of copper-coated SiC particulate-reinforced aluminum matrix composite10.3390/ma11040599 ↗
25. Microstructure evolution and superior tensile properties of low content graphene nanoplatelets reinforced pure Ti matrix composites10.1016/j.msea.2017.01.072 ↗
26. Second phase particle distribution and secondary recrystallisation10.1016/0956-716X(92)90146-6 ↗
27. Yu · 2016
28. Solid-state interfacial reaction and load transfer efficiency in carbon nanotubes (CNTs)-reinforced aluminum matrix composites10.1016/j.carbon.2016.12.013 ↗