journal article·2019-05

Mechanical properties and oxidation resistance of phenolic formaldehyde interlocking CNTs-Cf/SiC composite

Chen Tang, Alei Dang, Tiehu Li, Tingkai Zhao, Hao Li, Shasha Jiao

Ceramics International· Volume 45· Issue 7
Publisher page

Abstract

Abstract To improve the mechanical properties and oxidation resistance of short carbon fiber reinforced silicon carbide matrix composites, carbon nanotubes (CNTs) were grown in-situ on carbon fiber surfaces through continuous CVD, a small amount of phenolic formaldehyde (PF) was added to the matrix to densify the composite and interlock the fiber and the matrix. The CNTs-Cf/PF/SiC composite was fabricated by combining pre-casting and hot-pressing. Microstructural analyses revealed that CNTs were successfully grown on carbon fiber surfaces with entangled structures, while PF presented cobweb-like structure which tightly bonded the fiber and the matrix. Compared with CNTs-Cf/SiC and Cf/SiC, the flexural strength of CNTs-Cf/PF/SiC increased by 15.27% and 51.95%. After heat treatment, the weight loss of CNTs-Cf/PF/SiC reached 21.05%, and 31.9% of flexural strength retained after 15 thermal shock cycles at 1400 °C. These enhanced properties were indicative of its enormous potential to replace traditional Cf/SiC composite.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Carbon Nanotubes in Composites · Advanced ceramic materials synthesis · Fiber-reinforced polymer composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Thermal properties of graphene and nanostructured carbon materials10.1038/nmat3064 ↗
2. Increasing the through-thickness thermal conductivity of carbon fiber polymer–matrix composite by curing pressure increase and filler incorporation10.1016/j.compscitech.2011.09.011 ↗
3. Three-dimensional-linked carbon fiber-carbon nanotube hybrid structure for enhancing thermal conductivity of silicon carbonitride matrix composites10.1016/j.carbon.2016.07.002 ↗
4. The role of grafting force and surface wettability in interfacial enhancement of carbon nanotube/carbon fiber hierarchical composites10.1016/j.carbon.2013.12.020 ↗
5. Exceptionally high Young's modulus observed for individual carbon nanotubes10.1038/381678a0 ↗
6. Electronic and structural properties of carbon nanotubes10.1016/0008-6223(95)00018-9 ↗
7. Helical microtubules of graphitic carbon10.1038/354056a0 ↗
8. Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load10.1126/science.287.5453.637 ↗
9. Elastic properties of carbon nanotubes and nanoropes10.1103/PhysRevLett.79.1297 ↗
10. Study of composite joint strength with carbon nanotube reinforcement10.1007/s10853-009-3378-y ↗
11. Carbon nanotube/carbon fiber hybrid multiscale composites10.1063/1.1466880 ↗
12. Ceramic matrix composites containing carbon nanotubes10.1007/s10853-009-3262-9 ↗
13. Preparation of C/C-SiC composite by low temperature compression molding-liquid silicon infiltration and its application in automobile brake10.1016/j.ceramint.2015.09.030 ↗
14. Influence of carbon nanotubes coatings onto carbon fiber by oxidative treatments combined with electrophoretic deposition on interfacial properties of carbon fiber composite10.1016/j.apsusc.2015.09.178 ↗
15. Improvement of the electromagnetic shielding properties of C/SiC composites by electrophoretic deposition of carbon nanotube on carbon fibers10.1016/j.carbon.2016.07.070 ↗
16. Investigation of the effect of single wall carbon nanotubes on interlaminar fracture toughness of woven carbon fiber-epoxy composites10.1177/0021998310389088 ↗
17. Graphite fiber composites interlayered with single-walled carbon nanotubes10.1177/0021998311402726 ↗
18. Effect of carbon fibers grafted with carbon nanotubes on mechanical properties of cement-based composites10.1016/j.conbuildmat.2018.06.049 ↗
19. Preparation of hierarchical material by chemical grafting of carbon nanotubes onto carbon fibers10.1016/j.diamond.2017.10.013 ↗
20. Carbon nanotube/carbon fiber hybrid multiscale composites10.1063/1.1466880 ↗
21. Water-assisted highly efficient synthesis of impurity-free single-walled carbon nanotubes10.1126/science.1104962 ↗
22. Gas-phase catalytic growth of single-walled carbon nanotubes from carbon monoxide10.1016/S0009-2614(99)01029-5 ↗
23. Carbon rings and cages in the growth of single-walled carbon nanotubes10.1063/1.1287850 ↗
24. Improving thermal conductivity in the through-thickness direction of carbon fibre/SiC composites by growing vertically aligned carbon nanotubes10.1016/j.carbon.2017.01.103 ↗
25. Effect of carbon nanotubes on the interfacial shear strength of T650 carbon fiber in an epoxy matrix10.1016/j.compscitech.2008.12.021 ↗
26. Effective sintering aids for silicon carbide ceramics: reactivities of silicon carbide with various additives
27. Effect of sintering additives on microstructures and mechanical properties of short-carbon-fiber-reinforced SiC composites prepared by precursor pyrolysis-hot pressing10.1016/j.ceramint.2005.07.007 ↗
28. Carbon microfibers sheathed with aligned carbon nanotubes: towards multidimensional, multicomponent, and multifunctional nanomaterials10.1002/smll.200600097 ↗
29. Production of controlled architectures of aligned carbon nanotubes by an injection chemical vapour deposition method10.1016/S0008-6223(02)00314-7 ↗
30. Scalable manufacturing of carbon nanotubes on continuous carbon fibers surface from chemical vapor deposition10.1016/j.vacuum.2018.03.011 ↗
31. Direct growth of carbon nanotubes on carbon fibers: effect of the CVD parameters on the degradation of mechanical properties of carbon fibers10.1016/j.diamond.2014.11.002 ↗
32. In-situ growth of SiC nanostructures and their influence on anti-oxidation capability of C/SiC composites10.1016/j.corsci.2017.05.008 ↗
33. Oxidation behavior of carbon fiber-dispersed ZrB2-SiC-ZrC triple phase matrix composites in an oxyhydrogen torch environment10.1016/j.ceramint.2018.02.031 ↗
34. Effect of in-situ grown SiC nanowire and dense SiC on oxidation resistance of carbon fiber/SiC nanowire/SiC matrix composite in high temperature atmospheric environment10.1016/j.corsci.2018.02.034 ↗
35. Microstructure, mechanical properties and oxidation behavior of short carbon fiber reinforced ZrB2-20v/oSiC-2v/oB4C composite10.1016/j.msea.2018.01.124 ↗
36. Nanobeam mechanics: elasticity, strength, and toughness of nanorods and nanotubes10.1126/science.277.5334.1971 ↗