Effects of Zn2SiO4 on the phase evolution, thermal expansion and mechanical properties of LiAlSiO4 ceramic
Source abstract
Abstract
Abstract LiAlSiO4 (abbreviated as LAS) ceramics doped with variable mass percent of Zn2SiO4 were prepared by conventional solid-state route. The effects of Zn2SiO4 on the phase evolution, microstructure, thermal expansion and mechanical properties have been fully investigated. The results show that Zn2SiO4 reacted with LAS matrix to produce Li2Al2Si3O10 and ZnAl2O4. Fine-grain ZnAl2O4 phase accumulated on the grain boundaries of the main phase, which was helpful to improve the density. Simultaneously, both of the flexure strength and Vickers hardness of the multiphase ceramics were significantly enhanced with the increasing mass percent of Zn2SiO4 for the reason of dispersion strengthening effect. In addition, when the content of Zn2SiO4 increased from 10 wt% to 22.5 wt%, the coefficient of thermal expansion (CTE) of the composite ceramics increased monotonously from − 5.24 × 10−6/K to 1.49 × 10−6/K. Typically, the LAS ceramic doping with 17.5 wt% Zn2SiO4 sintered at 1175 °C for 4 h possesses excellent properties: α = 0.65 × 10−6/K, Hv = 5.34 GPa, σs = 102.6 MPa, which is a promising material in laser gyroscope and precision machining fields.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Microwave Dielectric Ceramics Synthesis · Ferroelectric and Piezoelectric Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Negative thermal expansion of lithium aluminosilicate ceramics at cryogenic temperatures10.1016/j.scriptamat.2010.03.047 ↗
2. Negative thermal expansion materials10.1016/S1359-0286(98)80076-4 ↗
3. The study on thermal expansion of ceramic composites with addition of ZrW2O810.1088/1757-899X/116/1/012030 ↗
4. Polymer-derived ceramic tapes with small and negative thermal expansion coefficients10.1016/j.jeurceramsoc.2017.08.034 ↗
5. ZrW2O8 -containing composites with near-zero coefficient of thermal expansion fabricated by various methods: comparison and optimization10.1016/j.compscitech.2008.09.032 ↗
6. Microstructure characteristics and microwave dielectric properties of calcium apatite ceramics as microwave substrates
7. Negative thermal expansion materials
8. Synthesis, processing, and characterization of negative thermal expansion zirconium tungstate nanoparticles with different morphologies10.1016/j.matchemphys.2011.09.055 ↗
9. Fabrication and properties of polyimide composites filled with zirconium tungsten phosphate of negative thermal expansion10.1016/j.matchemphys.2016.05.011 ↗
10. Thermal expansion behavior of a β-LiAlSiO4/Cu composite10.1007/s12598-009-0016-4 ↗
11. Thermal expansion of β-eucryptite in oxidebased ceramic composites10.1016/j.jeurceramsoc.2012.09.022 ↗
12. Synthesis of low expansion ceramics in Lithia–alumina–silica system with zirconia additive using the powder precursor in the form of hydroxyhydrogel10.1016/j.ceramint.2005.08.015 ↗
13. Simultaneous fabrication of a composite with low thermal expansion and high strength in the eucryptite — yttria-stabilized PSZ system10.1007/BF00352781 ↗
14. Effect of glassy bonding materials on the properties of LAS/SiC porous ceramics with near zero thermal expansion10.1016/j.jeurceramsoc.2013.08.008 ↗
15. Alumina reinforced eucryptite ceramics: very low thermal expansion material with improved mechanical properties10.1016/j.jeurceramsoc.2011.03.033 ↗
16. Ba9Y2Si6O24: a new silicate dielectric ceramic for microwave communication application10.1016/j.matlet.2016.04.212 ↗
17. The effect of aluminum sources on synthesis of low expansion glass–ceramics in lithia–alumina–silica system by sol–gel route10.1016/j.jnoncrysol.2009.08.020 ↗
18. Dilithium dialuminium trisilicate phase obtained using coal bottom ash10.1016/j.jnoncrysol.2007.06.047 ↗
19. Low temperature sintering kinetics of BaZn2Ti4O11 dielectric ceramic in the presence of a liquid phase
20. Sintering mechanism and microwave dielectric properties of BaTi4O9-BBZ composite for LTCC technology10.1016/j.ceramint.2017.06.178 ↗
21. Microstructure and mechanical properties at room and elevated temperatures of reactively hot pressed TiB2-TiC-SiC composite ceramic tool materials10.1016/j.ceramint.2015.12.068 ↗
22. Effects of sintering processes on mechanical properties and microstructure of TiB2-TiC+8wt% nano-Ni composite ceramic cutting tool material10.1016/j.msea.2012.02.002 ↗
23. Effect of Mo on microstructures and wear properties of in situ synthesized Ti(C,N)/Ni-based composite coatings by laser cladding10.3390/ma10091047 ↗
24. Study on crosslinking of polymers and joining mechanism of SiC ceramic
25. Fabrication and mechanical properties of Al2O3-SiCw-TiCnp ceramic tool material10.1016/j.ceramint.2017.05.049 ↗