Effects of oxidation cross-linking and sintering additives (TiN, B) on the formation and heat-resistant performance of polymer-derived SiC(Ti, B) films
Source abstract
Abstract
Abstract Effects of oxidation cross-linking and sintering additives (TiN, B) on the microstructure formation and heat-resistant performance of freestanding SiC(Ti, B) films synthesized from Ti, B-containing polycarbosilane (TiB-PCS) precursor were investigated. TiB-PCS green films were first cross-linked for 1 h, 2 h, 3 h and 4 h, respectively, and then pre-sintered at 950 °C. Finally, they were sintered at 1800 °C to complete the conversion from organic films to inorganic SiC(Ti, B) films. The results reveal that curing time has a great impact on the uniformity and density of SiC(Ti, B) films. TiB-PCS films cured for 3 h yield the best quality SiC(Ti, B) films, which are composed of β-SiC crystals, C clusters, α-SiC nano-crystals, a small amount of TiB 2 and B 4 C. TiB 2 and B 4 C are both steady phases which can inhibit abnormal growth of β-SiC, effectively reduce sintering temperature and help consume excess C from decomposition of amorphous SiO x C y . After high temperature annealing at 1500 °C, 1600 °C and 1700 °C in argon, SiC(Ti, B) films still keep excellent mechanical properties, which makes them attractive candidate materials for microelectromechanical systems (MEMS) used at ultra-high temperatures (exceeding 1500 °C).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Metal and Thin Film Mechanics · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Photoelectrochemical etching to fabricate single-crystal SiC MEMS for harsh environments10.1016/j.matlet.2010.10.034 ↗
2. Electrical, mechanical and metal contact properties of polycrystalline 3C–SiC films for MEMS in harsh environments10.1016/j.surfcoat.2007.05.007 ↗
3. SiC MEMS: opportunities and challenges for applications in harsh environments10.1016/S0257-8972(99)00374-6 ↗
4. High reliability of MEMS packaged capacitive pressure sensor employing 3C–SiC for high temperature10.1016/j.egypro.2015.03.279 ↗
5. Growth of 3C–SiC films on Si substrates by vapor–liquid–solid tri-phase epitaxy10.1016/j.ceramint.2015.02.091 ↗
6. Monocrystalline silicon carbide nanoelectro mechanical systems10.1063/1.1338959 ↗
7. Silicon carbide as a new MEMS technology10.1016/S0924-4247(99)00335-0 ↗
8. Single-crystalline, epitaxial cubic SiC films grown on (1 0 0) Si at 750°C by chemical vapor deposition10.1063/1.107191 ↗
9. Characteristics of polycrystalline 3C–SiC thin films grown on Si wafers for harsh environment microdevices10.1016/j.ceramint.2007.09.089 ↗
10. Effect of deposition atmosphere on the phase composition and microstructure of silicon carbide films prepared by laser chemical vapor deposition10.1016/j.ceramint.2015.01.142 ↗
11. RF-PECVD deposition and optical properties of hydrogenated amorphous silicon carbide thin films10.1016/j.ceramint.2014.02.067 ↗
12. Polycrystalline 3C-SiC thin films deposited by dual precursor LPCVD for MEMS applications10.1016/j.sna.2004.09.009 ↗
13. Synthesis and characterization of continuous freestanding silicon carbide films with polycarbosilane (PCS)10.1016/j.jeurceramsoc.2008.11.019 ↗
14. Fabrication of high performance ceramic microstructures from a polymeric precursor using soft lithography10.1002/1521-4095(200101)13:1<54::AID-ADMA54>3.0.CO;2-Y ↗
15. Synthesis of silicon carbide thin films with polycarbosilane (PCS)10.1111/j.1151-2916.1997.tb03124.x ↗
16. Ceramic fibers from polymer precursors10.1016/0010-4361(87)90489-7 ↗
17. Synthesis and photoluminescence properties of continuous freestanding SiC(Al) films derived from aluminum-containing polycarbosilane10.1016/j.tsf.2010.03.090 ↗
18. Preparation and characterization of freestanding SiC(Ti, B) films derived from polycarbosilane with TiN and B as additives10.1016/j.jeurceramsoc.2012.02.004 ↗
19. Comprehensive chemistry of polycarbosilanes, polysilazane, and polycarbosilazanes as precursors of ceramics10.1021/cr00037a014 ↗
20. Fabrication of SiCN ceramic MEMS using injectable polymer-precursor technique10.1016/S0924-4247(00)00545-8 ↗
21. Fabrication of SiCN MEMS by photopolymerization of pre-ceramic polymer10.1016/S0924-4247(01)00723-3 ↗
22. Amorphous Si(Al)OC ceramic from polysiloxanes: bulk ceramic processing, crystallization behavior and applications10.1016/j.jeurceramsoc.2003.10.016 ↗
23. Characteristics of SiCN microstructures for harsh environment and high-power MEMS applications10.1016/j.mejo.2007.07.078 ↗
24. Microstructure and mechanical properties of liquid-phase-sintered SiC with AlN and Y2O3 additions10.1016/j.ceramint.2004.08.014 ↗
25. Structure and properties of Sylramic™ Silicon carbide fiber – a polycrystalline, stoichiometric β-SiC composition10.1002/9780470294437.ch16 ↗
26. Synthesis of continuous silicon carbide fibre with high tensile strength and high Young's modulus
27. SiC ceramic micropatterns from polycarbosilanes10.1016/j.jeurceramsoc.2010.05.019 ↗
28. Comprehensive chemistry of polycarbosilanes, polysilazane, and polycarbosilazanes as precursors of ceramics10.1021/cr00037a014 ↗
29. Development of high tensile strength silicon carbide fiber using an organosilicon polymer precursor10.1038/273525a0 ↗
30. Synthesis and sintering of TiB2 nanoparticles10.1016/j.ceramint.2014.07.102 ↗
31. Microstructure and mechanical properties of hot pressed TiB2–SiC composite ceramic tool materials at room and elevated temperatures10.1016/j.msea.2014.03.084 ↗
32. Raman spectroscopy studies of the high-temperature evolution of the free carbon phase in polycarbosilane derived SiC ceramics10.1016/j.ceramint.2010.08.003 ↗
33. Effects of carbon and oxygen on the spark plasma sintering additive-free densification and on the mechanical properties of nanostructured SiC ceramics10.1016/j.jeurceramsoc.2015.05.014 ↗
34. Raman spectroscopy of carbon materials: structural basis of observed spectra10.1021/cm00011a018 ↗
35. Subtle Raman signals from nano-diamond and β-SiC thin films10.1016/j.tsf.2013.01.051 ↗
36. Synthesis and properties of hot pressed B4C–TiB2 ceramic composite10.1016/j.msea.2010.07.101 ↗
37. Synthesis mechanism and mechanical properties of TiB2-SiC composites fabricated with the B4C–TiC–Si system by reactive hot pressing10.1016/j.jallcom.2014.09.030 ↗
38. Microstructural evolution of Hi-Nicalon™ SiC fibers annealed and crept in various oxygen partial pressure atmospheres10.1023/A:1004772000985 ↗
39. Mechanical and microstructural evolution of Hi-Nicalon™ fibers annealed in O2–H2O–Ar atmospheres10.1016/j.msea.2007.10.035 ↗
40. Oxidation behaviour of Hi-Nicalon SiC monofilament fibres in air and O2–H2O–Ar atmospheres10.1016/j.corsci.2011.12.019 ↗
41. Thermal stability of the low-oxygen-content silicon carbide fiber, Hi-Nicalon™10.1016/S0266-3538(99)00012-3 ↗
42. The effect of high-temperature annealing on tensile strength and its mechanism of Hi-Nicalon SiC fibres under inert atmosphere10.1111/j.1460-2695.2008.01264.x ↗
43. Effect of heat treatment on the tensile strength and creep resistance of advanced SiC fibers10.1016/j.jnucmat.2004.04.123 ↗
44. Effects of heat treatment on the microstructure and flexural properties of CVI–Tyranno-SA/SiC composite10.1016/j.ceramint.2005.08.011 ↗
45. Ceramic fibres from polymer precursors10.1016/0010-4361(87)90489-7 ↗
46. Tressler Strengths of ceramic fibers at elevated temperatures10.1111/j.1151-2916.1989.tb06115.x ↗
47. Fabrication of carbon fiber reinforced ceramic matrix composites with improved oxidation resistance using boron as active filler10.1016/j.jeurceramsoc.2009.09.015 ↗
48. SiC matrix composites reinforced with internally synthesized TiB210.1007/BF00544201 ↗