Oxy-apatite reaction sintering of colloidal and classic ceramic processed powders
Source abstract
Abstract
Abstract Oxy-apatites are promising electrolyte materials for intermediate-temperature solid oxide fuel cells, IT–SOFC. However the requirements of electrolytes make necessary the preparation of dense films with the appropriated composition to show good electrical properties; in this way, colloidal processing is a key issue. This work involves the application of colloidal processing for four oxygen-excess oxy-apatites, La9.67(Si6O24)O2.5, La10(Si6O24)O3, La10(Si5.5Al0.5O24)O2.75 and La10(Si5Al1O24)O2.5 and their characterization (phases, microstructure and electrical properties). The results have been compared with those obtained by classical ceramic method to assure the same composition without loosing properties. Samples with the desired compositions were obtained by reaction sintering of La2O3, SiO2 and Al2O3. La10(Si5.5Al0.5O24)O2.75 prepared by colloidal processing and heated at 1923 K showed the highest conductivity value, 3.0 × 10−2 S cm−1 at 973 K. Furthermore, its residual porosity was very low. On the other hand, La10(Si6O24)O3 stoichiometry was tried by colloidal and ceramic methods under several experimental conditions. Unfortunately, the obtained oxy-apatite seems to have slightly lower lanthanum content. In spite of previous reports claiming the preparation of stoichiometric La10(Si6O24)O3, this study cannot support these findings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Solid oxide fuel cells10.1039/b105764m ↗
2. Recent advances in materials for fuel cells10.1146/annurev.matsci.33.022802.094122 ↗
3. Electrolytes for solid oxide fuel cells10.1016/j.jpowsour.2006.06.062 ↗
4. Solid oxide fuel cells
5. Influence of porosity on the electrical properties of La9.33(SiO4)6O2 oxyapatite10.1016/j.ceramint.2007.05.004 ↗
6. A novel enhancement of ionic conductivity in the cation-deficient apatite La9.33(SiO4)6O210.1039/b104006p ↗
7. Interstitial oxygen conduction in lanthanum oxy-apatite electrolytes10.1039/B315257J ↗
8. Evaluation of apatite silicates as solid oxide fuel cell electrolytes10.1016/j.jpowsour.2009.11.068 ↗
9. Insight into doping effects in apatite silicate ionic conductors10.1002/adfm.200600789 ↗
10. Developing apatites for solid oxide fuel cells: insight into structural, transport and doping properties10.1039/b704426g ↗
11. Ionic conductivity and fuel cell properties of apatite-type lanthanum silicates doped with Mg and containing excess oxide ions10.1016/j.ssi.2008.07.022 ↗
12. Effect of transition metal additives on electrical conductivity for La-excess-type lanthanum silicate10.1016/j.ssi.2010.09.031 ↗
13. Elaboration and ionic conduction of apatite-type lanthanum silicates doped with Ba, La10−xBax(SiO4)6O3−x/2 with x=0.25–210.1016/j.jeurceramsoc.2006.05.090 ↗
14. Oxide ionic conductivities of apatite-type lanthanum silicates and germanates and their possibilities as an electrolyte of lower temperature operating SOFC10.1016/j.ceramint.2009.10.022 ↗
15. Ionic and electronic conductivities and fuel cell performance of oxygen excess-type lanthanum silicates10.1149/1.3464803 ↗
16. Powder synthesis, processing and characterization of lanthanum silicates for SOFC application10.1016/j.jallcom.2009.10.106 ↗
17. Preparation and characterization of apatite-type lanthanum silicates by a sol–gel process10.1016/S0025-5408(01)00625-0 ↗
18. Chin. Synthesis and Conductivity of Oxyapatite Ionic Conductor La10−xVx(SiO4)6O3+x
19. Synthesis and characterization of oxide ions conductors with the apatite structure for intermediate temperature SOFC10.1016/j.matchemphys.2005.06.040 ↗
20. Ionic conductivity of apatite-type rare-earth silicates prepared by mechanical milling10.1016/j.jallcom.2008.09.070 ↗
21. Room-temperature synthesis of apatite-type lanthanum silicates by mechanically milling constituent oxides10.1016/j.ssi.2006.02.032 ↗
22. Evaluation of the La0.75Sr0.25Mn0.8Co0.2O3−δ system as cathode material for ITSOFCs with La9Sr1Si6O26.5 apatite as electrolyte10.1016/j.jeurceramsoc.2008.11.009 ↗
23. New approach to develop dense lanthanum silicate oxy-apatite sintered ceramics with high conductivity10.1016/j.ssi.2009.12.004 ↗
24. Elaboration, by tape casting, and thermal characterization of a solid oxide fuel half-cell for low temperature applications10.1016/j.materresbull.2009.11.001 ↗
25. Sintering kinetics and oxide ion conduction in Sr-doped apatite-type lanthanum silicates, La9Sr1Si6O26.510.1016/j.ssi.2009.10.009 ↗
26. Plasma spraying of lanthanum silicate electrolytes for intermediate temperature solid oxide fuel cells (ITSOFCs)10.1016/j.surfcoat.2010.05.034 ↗
27. Fabrication of anode supported SOFC using plasma-sprayed films of the apatite-type lanthanum silicate as an electrolyte10.1016/j.ssi.2010.09.030 ↗
28. La9.33Si6O26 electrolyte thin films for IT–SOFC application deposited by a HIPIMS/DC hybrid magnetron sputtering process10.1007/s11581-008-0239-7 ↗
29. Preparation of aluminium lanthanum oxyapatite tapes, La10AlSi5O26.5, by tape casting and reaction sintering10.1016/j.jeurceramsoc.2011.03.023 ↗
30. Colloidal processing and characterization of aluminum-doped lanthanum oxyapatite, La10AlSi5O26.510.1111/j.1551-2916.2010.04074.x ↗
31. Interstitial oxygen conduction in lanthanum oxy-apatite electrolytes10.1039/B315257J ↗
32. Development of apatite-type oxide ion conductors10.1002/tcr.20028 ↗
33. Ionic conductivity of apatite-type solid electrolyte material, La10−XBaXSi6O27−X/2 (X=0–1), and its fuel cell performance10.1016/j.jpowsour.2010.01.050 ↗
34. Electrical properties of La10Si6O27-based oxides10.1016/j.ssi.2008.02.037 ↗
35. Electrical conductivity studies of nanocrystalline lanthanum silicate synthesized by sol–gel route10.1016/j.jallcom.2010.09.141 ↗
36. Synthesis and characterization of lanthanum silicate apatite by gel-casting route as electrolytes for solid oxide fuel cells10.1016/j.jpowsour.2008.12.064 ↗
37. Raman and 29Si NMR spectroscopic characterization of lanthanum silicate electrolytes: emphasis on sintering temperature to enhance the oxide-ion conductivity10.1016/j.electacta.2009.07.086 ↗
38. Synthesis and electrical properties of apatite-type La10Si6O2710.1016/j.jpowsour.2009.10.088 ↗
39. A profile refinement method for nuclear and magnetic structures10.1107/S0021889869006558 ↗
40. A. C. Larson, R. B. V. Dreele, General Structure Analysis System (GSAS) program. Rep. No. LA-UR-86748, Los Alamos National Laboratory, Los Alamos, CA, 1994.
41. Interstitial oxide positions in oxygen-excess oxy-apatites10.1016/j.ssi.2006.05.034 ↗
42. Influence of synthesis route and composition on electrical properties of La9.33+xSi6O26+3x/2 oxy-apatite compounds10.1016/j.ssi.2008.04.035 ↗
43. Johnson · 1990
44. Oxygen ionic and electronic transport in apatite-type La10−x(Si,Al)6O26±δ10.1016/j.jssc.2005.04.018 ↗
45. Crystalchemistry and oxide ion conductivity in the lanthanum oxygermanate apatite series10.1021/cm031017u ↗
46. High oxide ion conductivity in al-doped germanium oxyapatite10.1021/cm048361r ↗
47. Superior perovskite oxide-ion conductor; strontium- and magnesium-doped LaGaO3: I, phase relationships and electrical properties10.1111/j.1151-2916.1998.tb02662.x ↗