journal article·2015-12Open access

Microstructure and impedance spectroscopy of 3YTZP/SWNT ceramic nanocomposites

R. Poyato, J. Macías-Delgado, A. Gallardo-López, A. Muñoz, A. Domínguez-Rodríguez

Ceramics International· Volume 41· Issue 10

Abstract

This work provides new insights on microstructure and electrical properties of 3 mol% Y2O3–ZrO2 (3YTZP) composites with 0.5, 1, and 1.5 vol% single walled carbon nanotubes (SWNTs). The composites were spark plasma sintered (SPS) in identical conditions at 1250 °C from powder prepared by two different processing routines, with the aim of optimizing the SWNTs dispersion throughout the ceramic matrix. High densification and submicrometric grain size were achieved in all the composites. Electrical properties of the composites were characterized in a wide temperature range, and modeling of the impedance properties was approached by means of an equivalent circuit that allows separation of the individual SWNT bundles contribution to resistance from the resistance due to junctions between bundles. Effects of the homogeneous distribution of SWNTs at the ceramic grain boundaries on the crystalline phases, percolation threshold, total conductivity and evolution of junctions׳ resistivity with temperature were analyzed and discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Carbon Nanotubes in Composites · Advanced ceramic materials synthesis · Smart Materials for Construction

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Recent advances on carbon nanotubes and graphene reinforced ceramics nanocomposites10.3390/nano5010090 ↗
2. Potential applications of carbon nanotubes10.1007/978-3-540-72865-8_2 ↗
3. Carbon nanotubes – the route toward applications10.1126/science.1060928 ↗
4. Multifunctional composites of ceramics and single-walled carbon nanotubes10.1002/adma.200802270 ↗
5. Electrically conductive alumina–carbon nanocomposites prepared by spark plasma sintering10.1016/j.jeurceramsoc.2009.05.045 ↗
6. Effect of single-walled carbon nanotubes on thermal and electrical properties of silicon nitride processed using spark plasma sintering10.1016/j.jeurceramsoc.2010.10.020 ↗
7. Preparation-microstructure-property relationships in double-walled carbon nanotubes/alumina composites10.1016/j.carbon.2012.10.030 ↗
8. Mechanical properties and electrical conductivity in a carbon nanotube reinforced silicon nitride composite10.1016/j.ceramint.2011.07.038 ↗
9. Electrical conductivity and dielectric properties of multiwalled carbon nanotube and alumina composites10.1063/1.2357920 ↗
10. Effect of multiwall carbon nanotubes on electrical and dielectric properties of yttria-stabilized zirconia ceramic10.1111/j.1551-2916.2006.01232.x ↗
11. Electronic transport properties of multiwall carbon nano-tubes/yttria stabilized zirconia composites10.1063/1.2430700 ↗
12. Colloidal processing, hot pressing and characterisation of electroconductive MWCNT–alumina composites with compositions near the percolation threshold10.1016/j.jeurceramsoc.2008.07.047 ↗
13. Microstructure and mechanical properties of single wall carbon nanotube reinforced yttria stabilized zirconia ceramics10.1016/j.msea.2012.07.001 ↗
14. Mixed ionic–electronic conductivity in yttria-stabilized zirconia/carbon nanotube composites10.1063/1.2821373 ↗
15. Dramatic effect of multiwalled carbon nanotubes on the electrical properties of alumina based ceramic nanocomposites10.1016/j.compscitech.2009.01.015 ↗
16. Multi-scale electrical response of silicon nitride/multi-walled carbon nanotubes composites10.1016/j.compscitech.2010.10.004 ↗
17. Mechanical and electrical properties of low SWNT content 3YTZP composites10.1016/j.jeurceramsoc.2015.02.022 ↗
18. Aqueous colloidal processing of single-wall carbon nanotubes and their composites with ceramics10.1088/0957-4484/17/6/038 ↗
19. Effect of high SWNT content on the room temperature mechanical properties of fully dense 3YTZP/SWNTcomposites10.1016/j.jeurceramsoc.2013.12.024 ↗
20. Improvement of Vickers hardnessmeasurement on SWNT/Al2O3 composites consolidated by spark plasma sintering10.1016/j.jeurceramsoc.2014.05.048 ↗
21. Influence of the processing route on the carbon nanotubes dispersion and creep resistance of 3YTZP/SWCNTs nanocomposites10.1111/jace.13348 ↗
22. A. Gallardo-López, A. Morales-Rodríguez, J. Vega-Padillo, R. Poyato, A. Muñoz, A. Domínguez-Rodríguez, 3Y-TZP with fully dispersed SWNTs. Keys to processing and room temperature mechanical properties .(Personal communication)
23. X-ray diffraction evidence of a phase transformation in zirconia by the presence of graphite and carbon nanotubes in zirconia toughened alumina composites10.1016/j.ijrmhm.2012.07.004 ↗
24. Percolation of single-walled carbon nanotubes in ceramic matrix nanocomposites10.1016/j.actamat.2003.10.038 ↗
25. Separation of junction and bundles resistance in single wall carbon nanotube percolation networks by impedance spectroscopy10.1063/1.3490650 ↗
26. Effect of graphitic filler size and shape on the microstructure, electrical percolation behavior and thermal properties of nanostructured multilayered carbon films deposited onto paper substrates10.1557/jmr.2013.343 ↗
27. Electronic properties, junctions, and defects of carbon nanotubes
28. Electrical connectivity in single-walled carbon nanotube networks10.1021/nl9020914 ↗
29. Dominant role of tunneling resistance in the electrical conductivity of carbon nanotube-based composites10.1063/1.2819690 ↗
30. Fluctuation-induced tunneling conduction in disordered materials10.1103/PhysRevB.21.2180 ↗
31. Spark plasma sintering of a commercially available granulated zirconia powder II. Microstructure after sintering and ionic conductivity10.1016/j.actamat.2008.05.031 ↗