Y3Ce7Ta2O23.5 and Yb3Ce7Ta2O23.5—Two kinds of novel ceramics for thermal barrier coatings
Source abstract
Abstract
Abstract For the development of ceramic candidates for thermal barrier coatings, two kinds of new ceramics, Y3Ce7Ta2O23.5 and Yb3Ce7Ta2O23.5, were synthesized by sintering at 1873 K for 10 h. The obtained samples were composed of a single fluorite-type phase, and their relative densities are greater than 90%. Because of phonon scattering caused by the complex lattice, the large number of oxygen vacancies, and substituted atoms, the thermal conductivity is lower than that of 8YSZ. The coefficients of thermal expansion (CTEs) of these two products are located in the range of 10.22–12.57 × 10−6/K and 9.62–12.66 × 10−6/K, respectively, from 323 K to 1473 K, and they also exhibit excellent phase stability up to 1473 K. However, their thermal conductivities and CTEs are lower than those of RE2Ce2O7 (RE = La, Nd, or Sm).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Nuclear materials and radiation effects · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Influence of interface morphology on erosion failure of thermal barrier coatings10.1016/j.ceramint.2018.08.188 ↗
2. Fracture mechanism maps for thermal barrier coatings subjected to single foreign object impact10.1016/j.wear.2018.08.020 ↗
3. Substrate-constructed effect on the stiffening behavior of lamellar thermal barrier coatings10.1016/j.jeurceramsoc.2018.01.028 ↗
4. Lanthanum cerate thermal barrier coatings generated from thermal plasma synthesized powders10.1016/j.ceramint.2018.01.036 ↗
5. Low thermal conductivity and high-toughness CeO2-Gd2O3 co-stabilized zirconia ceramic for potential thermal barrier coating applications10.1016/j.jeurceramsoc.2018.04.065 ↗
6. Development and analysis of thermal barrier coatings on gas turbine blades-a review
7. Investigation of a new type of composite ceramics for thermal barrier coatings10.1016/j.matdes.2016.09.050 ↗
8. GdPO4 as a novel candidate for thermal barrier coatings applications at elevated temperatures10.1016/j.surfcoat.2018.06.016 ↗
9. Outstanding durability of sol-gel thermal barrier coatings reinforced by YSZ-fibers10.1016/j.jeurceramsoc.2018.06.025 ↗
10. Temperature induced structure degradation of yttria-stabilized zirconia thermal barrier coatings10.1016/j.surfcoat.2018.07.057 ↗
11. Hot corrosion performance and electrochemical study of CoNiCrAlY/YSZ/YSZ-La2O3 multilayer thermal barrier coatings in the presence of molten salt10.1016/j.matchemphys.2018.08.004 ↗
12. Thermal properties of La3TaO7 and La2AlTaO7 oxides10.1016/j.ceramint.2016.10.005 ↗
13. Synthesis, crystal structure and thermophysical properties of (La1-xEux)3TaO7 ceramics10.1016/j.ceramint.2018.06.021 ↗
14. Thermal conductivity and expansion coefficient of Ln2LaTaO7 (Ln=Er and Yb) oxides for thermal barrier coating applications10.1016/j.ceramint.2016.05.141 ↗
15. Structure and thermophysical performances of Sm2LaTaO7 and Gd2LaTaO7 oxides10.1016/j.ceramint.2018.06.220 ↗
16. Structure characterization and thermophysical properties of R2LaTaO7 (R=Dy and Y) oxides10.1016/j.ceramint.2018.06.229 ↗
17. Thermal properties of RE2AlTaO7 (Re=Gd and Yb) oxides10.1016/j.ceramint.2018.03.113 ↗
18. Synthesis, thermal conductivities and phase stability of Gd3TaO7 and La doped Gd3TaO7 Ceramics10.1016/j.jallcom.2017.10.266 ↗
19. Effect of Al3+ doping on mechanical and thermal properties of DyTaO4 as promising thermal barrier coating application10.1111/jace.15382 ↗
20. Materials selection guidelines for low thermal conductivity thermal barrier coatings10.1016/S0257-8972(02)00593-5 ↗
21. Structural, electrical and thermal expansion studies of tri-doped Ceria electrolyte materials for IT-SOFCs10.1016/j.jallcom.2017.05.022 ↗
22. Detonation nanodiamond introduced into samarium doped ceria electrolyte improving performance of solid oxide fuel cell10.1016/j.jpowsour.2016.12.051 ↗
23. Effect of La3+ and Pr3+ co-doping on structure, thermal and electrical properties of ceria ceramics as solid electrolytes for IT-SOFC applications10.1016/j.cap.2018.06.013 ↗
24. Structural, densification and electrical properties of Gd3+ and Cu2+ co-doped ceria solid electrolytes for SOFC applications: effects of Gd2O3 content10.1016/j.ceramint.2017.11.009 ↗
25. Ionic conductivity in multiply substituted ceria-based electrolytes10.1016/j.ssi.2017.12.013 ↗
26. Investigation about thermophysical properties of Ln2Ce2O7 (Ln=Sm, Er and Yb) oxides for thermal barrier coatings10.1016/j.materresbull.2012.08.074 ↗
27. Preparation and thermophysical properties of (Sm1-xErx)2Ce2O710.1016/j.materresbull.2013.12.011 ↗
28. Preparation and thermal conductivity of Dy2Ce2O7 ceramic material10.1007/s11665-011-9950-z ↗
29. Ce1-xSmxO2-x/2—a novel type of ceramic material for thermal barrier coatings10.1007/s40145-016-0196-y ↗
30. Analysis of structure and heat-physical properties of Sm2(Hf1-xCex)2O7 ceramics10.1016/j.ceramint.2018.09.002 ↗
31. Synthesis of monodispersed La2Ce2O7 nanocrystals via hydrothermal method: a study of crystal growth and sintering behavior10.1016/j.ijrmhm.2011.12.002 ↗
32. Role of trivalent La and Nd dopants in lattice distortion and oxygen vacancy generation in cerium oxide nanoparticles10.1063/1.2210795 ↗
33. The size and strain effects on the Raman spectra of Ce1-xNdxO2-y nanopowders10.1016/j.ssc.2005.12.006 ↗
34. Doped nanosized ceria solid solutions for low temperature soot oxidation: zirconium versus lanthanum promoters10.1016/j.apcatb.2010.09.012 ↗
35. Estimation of heat capacities of solid mixed oxides10.1016/S0040-6031(02)00177-6 ↗
36. Estimation of thermodynamic data for metallurgical applications10.1016/S0040-6031(97)00469-3 ↗
37. Synthesis, thermal conductivities and phase stability of Gd3TaO7 and La doped Gd3TaO7 ceramics10.1016/j.jallcom.2017.10.266 ↗
38. Influence of B site substitution Ti on the structure and thermophysical properties of A2B2O7-type pyrochlore Gd2Zr2O710.1016/j.actamat.2009.06.040 ↗
39. Preparation and thermphysical properties of CeO2 doped La2Zr2O7 ceramic for thermal barrier coatings10.1016/j.jallcom.2006.08.005 ↗
40. Investigation about thermophysical properties of Ln2Ce2O7 (Ln=Sm, Er, and Yb) oxides for thermal barrier coatings10.1016/j.materresbull.2012.08.074 ↗
41. Neodymium- cerium oxide as new thermal barrier coating material
42. The thermal cycling behavior of Lanthanum cerium oxide thermal barrier coating prepared by EB- PVD10.1016/j.surfcoat.2005.05.033 ↗
43. Preparation and thermophysical properties of Sm2(Ce0.3Zr0.7)2O7 ceramic10.1002/adem.200700153 ↗
44. Preparation and properties of anti-static coating on the 3Y-TZP ceramics10.1016/j.ceramint.2018.06.060 ↗
45. Surface resistivity regulation of zirconia ceramics for anti-static purposes by novel solution infiltration method10.1016/j.ceramint.2016.08.187 ↗
46. Storing solar energy within Ag-paraffin@halloysite microspheres as a novel self-heating catalyst10.1016/j.apenergy.2018.04.013 ↗
47. Preparation of bimetallic Cu-Co nanocatalysts on poly (diallydimethylammonium chloride) functionalized halloysite nanotubes for hydrolytic dehydrogenation of ammonia borane10.1016/j.apsusc.2017.08.171 ↗