Preparation and performance of PrLaNiO 4 and (La 0.75 Sr 0.2 Ba 0.05 ) 0.175 Ce 0.825 O 1.891 composite cathode material by solid state reaction for IT-SOFCs
Source abstract
Abstract
Abstract Pr 2 NiO 4 is one of the compounds in the Ln 2 NiO 4 (Ln=Pr, La and Nd) group that exhibits the Ruddlesden-Poppor structure. The present research substituted this compound by lanthanum (La) to enhance chemical stability, because of the decomposition reaction of Pr 2 NiO 4 for long-term operation. PrLaNiO 4 powders were then synthesized using a solid state reaction method for the application of cathode materials in an intermediate-temperature solid oxide fuel cell (IT-SOFC); these material properties were then examined by XRD, SEM, thermomechanical analysis, alternating current impedance spectroscopy, and electrochemical analysis. The crystallization of the as-prepared PrLaNiO4 was obtained after heat-treatment at 1200 °C for 6 h. Moreover, PrLaNiO 4 cathode material demonstrated favorable chemical stability with the electrolyte of (La 0.75 Sr 0.2 Ba 0.05 ) 0.175 Ce 0.825 O 1.891 (LSBC) under 1200 °C for 6 h. The determined thermal expansion coefficient of PrLaNiO 4 was 14.1 × 10 −6 K −1 . Furthermore, to reduce their resistance the PrLaNiO 4 powders were mixed with various wt% of LSBC. The maximal power density of PrLaNiO 4 −5 wt% LSBC is 606 mW/cm 2 operated at 800 °C in air, which also exhibited lower area-specific resistance of 0.202 Ω cm 2 . The study concludes that the PrLaNiO 4 −5 wt% LSBC is a better choice than Pr 2 NiO 4 in cathode material for IT-SOFCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. La2−xPrxNiO4+δ as suitable cathodes for metal supported SOFCs10.1016/j.ssi.2015.05.005 ↗
2. Cathode property and thermal stability of Pr and Nd mixed Ni-based Ruddlesden-popper oxide for low-temperature operating solid oxide fuel cell10.1016/j.matlet.2014.08.041 ↗
3. Overstoichiometric oxides Ln2NiO4+δ (Ln = La, Pr or Nd) as oxygen anodic electrodes for solid oxide electrolysis application10.1016/j.ijhydene.2015.09.107 ↗
4. Thermal stability of Ln2NiO4+δ (Ln = La, Pr, Nd) and their chemical compatibility with YSZ and CGO solid electrolytes10.1016/j.ijhydene.2011.08.105 ↗
5. Oxygen diffusion and transport properties in non-stoichiometric Ln2−xNiO4+δ oxides10.1016/j.ssi.2005.06.033 ↗
6. Properties and microstructural analysis of La1−xSrxGa1−yMgyO3-δ solid electrolyte ceramic10.1016/j.ceramint.2013.05.050 ↗
7. Effects of strontium doping on the structure, oxygen nonstoichiometry and electrochemical performance of Pr2−xSrxNi0.6Cu0.4O4+δ (0.1 ≤ x ≤ 0.5) cathode materials10.1016/j.jpowsour.2014.10.191 ↗
8. Preparation and Characteristics of Pr1.2Sr0.8NiO4-Sm0.2Ce0.8O1.9 Composite Powders for Solid Oxide Fuel Cell Cathode Applications10.4028/www.scientific.net/AMR.412.116 ↗
9. High performance praseodymium nickelate oxide cathode for low temperature solid oxide fuel cell10.1016/j.jpowsour.2010.09.036 ↗
10. Synthesis and electrical properties of screen-printed doped ceria interlayer for IT-SOFC applications10.1016/j.jallcom.2014.12.169 ↗
11. Composite cathode La0.6Sr0.4Co0.2Fe0.8O3–Sm0.1Ce0.9O1.95–Ag for intermediate-temperature solid oxide fuel cells10.1016/j.jallcom.2004.11.056 ↗