journal article·2019-07

Dewatering of spontaneous-coagulation-cast alumina ceramic gel by filtrating with low pressure

Zhengxian Di, Shunzo Shimai, Jin Zhao, Xiaojian Mao, Jian Zhang, Guohong Zhou, Juan Liu, Shiwei Wang

Ceramics International· Volume 45· Issue 10
Publisher page

Abstract

Abstract Water removal in colloidal processing is a tough and crucial problem because deformation and cracking of the wet body easily happen during the drying process. Inspired by conventional pressure filtration (PF), we combined spontaneous coagulation casting (SCC) with PF to partially remove water from the gelled sample before drying for the purpose of lessening the risk of cracking and shortening the drying period. The effect of pressure, holding time, and solid loading on the particle packing ratio of wet samples, the drying process, and the bulk density and homogeneity of green and sintered bodies was surveyed systemically. The PF process of 0.4 MPa for 2 h was optimized based on dewatering ratio from ceramic slurries. The particle packing ratio of the pressure-filtrated samples increased with the solid loading of ceramic slurries, and 61 vol% was obtained for the slurry with 56 vol% solid loading. The drying time of the pressure-filtrated samples was shortened by as much as 42%–53% compared with that of the gelled samples, and the linear shrinkage for the pressure-filtrated samples during drying was only approximately 0.5%, much smaller than that of the gelled samples (2.4%–4.6%). Furthermore, the bulk density of the pressure-filtrated green bodies was more than 2% higher than that of the gelled green bodies, and more homogeneous green bodies were obtained by PF than by SCC. The alumina ceramic with 98.8% relative density and a homogenous density distribution was obtained after being sintered at 1550 °C for 2 h.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Recycling and utilization of industrial and municipal waste in materials production · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Room-temperature gelcasting of alumina with a water-soluble copolymer10.1557/jmr.2013.132 ↗
2. A method for gelcasting high-strength alumina ceramics with low shrinkage10.1557/jmr.2013.381 ↗
3. Tailoring magnetic properties of self-biased hexaferrites using an alternative copolymer of isobutylene and maleic anhydride
4. Fabrication of porous Al2O3 ceramics by rapid gelation and mechanical foaming10.1557/jmr.2013.170 ↗
5. Fabrication of porous SiC ceramics through a modified gelcasting and solid state sintering10.1016/j.msea.2015.12.061 ↗
6. Gelcasting of transparent YAG ceramics by a new gelling system10.1016/j.ceramint.2014.04.125 ↗
7. Fabrication of transparent Y2O3 ceramics via aqueous gelcasting10.1016/j.ceramint.2014.01.106 ↗
8. Aqueous gelcasting of the transparent MgAl2O4 spinel ceramics10.1016/j.jallcom.2015.05.275 ↗
9. Fabrication of aluminum oxynitride (γ-AlON) transparent ceramics with modified gelcasting10.1111/jace.12853 ↗
10. A physical model for the drying of gelcast ceramics10.1111/j.1151-2916.1999.tb01795.x ↗
11. Drying of gelcast ceramics
12. Drying of gelcast ceramic parts via the liquid desiccant method10.1016/S0955-2219(03)00045-1 ↗
13. Pressure filtration - consolidation kinetics and mechanics
14. Shape forming of ceramic powders by manipulating the interparticle pair potential10.1016/S0009-2509(00)00484-X ↗
15. Plastic-to-brittle transition of saturated, alumina powder compacts10.1111/j.1151-2916.1996.tb08091.x ↗
16. Improving the homogeneity and reliability of ceramic parts with complex shapes by pressure-assisted gel-casting10.1016/j.matlet.2004.08.015 ↗
17. Pressure filtration assisted gel casting in translucent alumina ceramics fabrication10.1016/j.ceramint.2018.06.079 ↗
19. Gelcasting of alumina using epoxy resin as a gelling agent10.1111/j.1551-2916.2007.01492.x ↗
20. Correlation between microstructure evolution and drying behavior of gelcast alumina green bodies10.1016/j.ceramint.2015.06.001 ↗
21. Pressure filtration of silicon-nitride suspensions with constant filtration-rate10.1016/0921-5093(92)90213-K ↗
22. The influence of solid loading in suspensions of a submicrometric alumina powder on green and sintered pressure filtrated samples10.1016/j.ceramint.2009.07.032 ↗
23. Influence of the stabilising mechanism and solid loading on slip casting of alumina10.1016/S0955-2219(97)00159-3 ↗
24. Shrinkages during from liquid to solid in colloidal forming10.4028/www.scientific.net/KEM.336-338.2378 ↗