Influence of rare earth Tb4O7 addition on the densification, abrasion resistance and microstructure of alumina ceramics
Source abstract
Abstract
Abstract This study aimed to improve the purity and performance of alumina ceramics used as ball milling media. High-alumina ceramics (> 96 wt% Al2O3), with high densification and excellent abrasion resistance, were fabricated by the cold isostatic pressing method. The effects of adding the rare earth Tb4O7 on the densification, abrasion resistance, crystalline phase, micro-morphology and grain size of the ceramics were studied. The experiment results showed that the densification and abrasion resistance of the samples increased with Tb4O7 addition. The sample with 0.8 wt% Tb4O7 sintered at 1625 °C exhibited the best performance, with a linear shrinkage, relative density and abrasion rate of 22.28%, 95.70% and 0.103‰, respectively. The abrasion resistance improved by 27.5% compared with the sample without Tb4O7. X-ray diffraction analysis indicated that the primary phases of the samples were corundum, spinel, CaAl12O19 and α-quartz, and a small quantity of Tb3Al5O12 was generated when more than 0.4 wt% Tb4O7 was added. Furthermore, some Mg2+ and Ca2+ ions in the liquid phases dissolved into Tb3Al5O12 crystalline grains during the sintering process, which enhanced the grain boundary cohesion of the materials. Scanning electron microscopy indicated that the existence of Tb3Al5O12 at grain boundaries reduced the average size of the corundum grains. This helped transform inter-granular fractures into trans-granular fractures, thereby improving the abrasion resistance of the ceramic materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Microwave Dielectric Ceramics Synthesis · Nuclear materials and radiation effects
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. One-step synthesis of manganese ferrite nanoparticles by ultrasonic wave-assisted ball milling technology10.1016/j.matchemphys.2012.03.091 ↗
2. A comparison of wear rates of ball mill grinding media
3. Stress intensity in stirred media mills and its effect on specific energy requirement10.1016/S0301-7516(00)00037-5 ↗
4. Ceramic bead behavior in ultra fine grinding mills10.1016/j.mineng.2016.08.016 ↗
5. Preparation and thermal shock resistance of cordierite-spodumene composite ceramics for solar heat transmission pipeline10.1016/j.ceramint.2016.05.147 ↗
6. Development of ceramic on ceramic implants for total hip arthroplasty10.1111/j.1757-7861.2010.00083.x ↗
7. Graphene for tough and electroconductive alumina ceramics10.1016/j.jeurceramsoc.2013.07.007 ↗
8. Effect of starch addition on microstructure and properties of highly porous alumina ceramics10.1016/j.ceramint.2013.04.072 ↗
9. Solid particle erosion behaviour of high purity alumina ceramics10.1016/j.ceramint.2010.08.029 ↗
10. Investigation of alumina pellets for optical glass grinding
11. Grinding of alumina/aluminum composites10.1016/S0924-0136(02)00075-4 ↗
12. Effect of microstructure on the wear transition of zirconia toughened alumina10.1016/0043-1648(93)90514-M ↗
13. Processing of alumina-zirconia composites by surface modification route with enhanced hardness and wear resistance10.1016/j.ceramint.2014.09.006 ↗
14. The relationship between microstructure, fracture and abrasive wear in Al2O3/SiC nanocomposites and microcomposites containing 5 and 10% SiC10.1016/j.jeurceramsoc.2009.03.023 ↗
15. Effect of Y2O3 additives on the wet abrasion resistance of an alumina-based grinding medium10.1016/j.wear.2016.03.010 ↗
16. Effect of rare-earth Lu2O3 on the wear resistance of alumina ceramics for grinding media10.1016/j.powtec.2016.09.018 ↗
17. Effects of Eu2O3 addition on microstructure, grain-boundary cohesion and wear resistance of high-alumina ceramics10.1016/j.jallcom.2016.11.099 ↗
18. Preparation and performance study of mullite/Al2O3 composite ceramics for solar thermal transmission pipeline10.1111/ijac.12584 ↗
19. Effect of Tb4O7 on wear resistance of high-alumina ceramic10.4028/www.scientific.net/AMR.941-944.534 ↗
20. Impurity effects on grain boundary strength instructural ceramics10.1016/S0921-5093(01)01035-8 ↗
21. Effect of Y2O3, La2O3, Sm2O3 on behaviors of alumina ceramics
22. Effect of andalusite and zircon on the performances of cordierite-spodumene composite ceramics for solar heat transmission pipeline10.1016/j.ceramint.2016.08.121 ↗
23. Grain-size and R-curve effects in the abrasive wear of alumina10.1111/j.1151-2916.1989.tb09718.x ↗
24. Correlations between microstructural parameters, micromechanical properties and wear resistance of plasma sprayed ceramic coatings10.1016/S0043-1648(01)00608-1 ↗