Rapid microwave synthesis of coaxial SiC/carbon fibre (SiC/CF) with improved oxidation resistance and wettability
Source abstract
Abstract
Abstract Coaxial SiC/carbon fibre (SiC/CF) materials were prepared via rapid microwave synthesis at 1400 °C for 30 min. X-ray diffraction, scanning electron microscopy, and thermogravimetric analysis were performed to investigate the structure and oxidation resistance of the samples. The results showed that a uniform and continuous β-SiC shell was obtained after the oxidation, confirming that the SiC/CF samples had a coaxial structure. The shell thickness could be regulated by adjusting the Si:C molar ratio. The SiC shell improved the oxidation resistance of the CFs significantly. The surface wettability of SiC/CF was also investigated. It was found that the hydrophilic and rough SiC shell played an important role in enhancing the wettability of the CFs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fiber-reinforced polymer composites · Advanced ceramic materials synthesis · Electromagnetic wave absorption materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Mechanical and electromagnetic shielding performance of carbon fiber reinforced multilayered (PyC-SiC)(n) matrix composites10.1016/j.carbon.2016.10.004 ↗
2. Assessment of ultrasonic drilling of C/SiC composite material10.1016/S1359-835X(99)00065-2 ↗
3. Mechanical and electromagnetic shielding properties of carbon fiber reinforced silicon carbide matrix composites10.1016/j.carbon.2015.08.011 ↗
4. Protective ceramic multilayer coatings for carbon fibers10.1016/j.surfcoat.2006.03.046 ↗
5. Oxidation of carbon/carbon composites-a theoretical analysis10.1016/0008-6223(88)90040-1 ↗
6. Carbon fibers: precursor systems, processing, structure, and properties10.1002/anie.201306129 ↗
7. Room-temperature aqueous plasma electrolyzing Al2O3 nano-coating on carbon fiber10.1016/j.apsusc.2017.05.064 ↗
8. Preparation and microstructure of Al2O3-SiO2-TiO2 coating on three-dimensional braided carbon fiber by sol-gel technology10.1016/j.matdes.2015.10.079 ↗
9. Thermal expansion and thermal expansion anisotropy of SiC polytypes10.1111/j.1151-2916.1987.tb05673.x ↗
10. Transverse and longitudinal coefficient of thermal expansion of carbon fibers at high temperatures (300–2500 K)10.1016/j.carbon.2008.07.035 ↗
11. Oxidation of refractory metallic coatings on carbon fibers heated up to 1850 °C10.1016/j.surfcoat.2010.10.037 ↗
12. Oxidation protection for carbon fibre composites10.1007/BF00357844 ↗
13. High-temperature protective coatings for carbon fibers10.1134/S0020168512030168 ↗
14. Surface and wettability property analysis of CCF300 carbon fibers with different sizing or without sizing10.1016/j.matdes.2010.08.004 ↗
15. Effectively enhanced mechanical properties of injection molded short carbon fiber reinforced polyethersulfone composites by phenol-formaldehyde resin sizing10.1016/j.compositesb.2017.11.033 ↗
16. Carbon fiber surfaces and composite interphases10.1016/j.compscitech.2014.07.005 ↗
17. Morphology and electromagnetic interference shielding effects of SiC coated carbon short fibers10.1039/C5TC01987G ↗
18. The synthesis of SiC and TiC protective coatings for carbon fibers by the reactive replica process10.1016/j.jeurceramsoc.2008.02.022 ↗
19. Novel synthesis and characterization of silicon carbide nanowires on graphite flakes10.1016/j.ceramint.2013.08.051 ↗
20. The influence of reaction parameters on the free Si and C contents in the synthesis of nano-sized SiC10.1016/j.ceramint.2005.06.011 ↗
21. Heterostructures of single-walled carbon nanotubes and carbide nanorods
22. Development of bond-order potentials that can reproduce the elastic constants and melting point of silicon for classical molecular dynamics simulation10.1016/j.commatsci.2006.07.013 ↗
23. Novel synthesis and characterization of high quality silicon carbide coatings on carbon fibers10.1111/j.1551-2916.2012.05153.x ↗
24. In situ gas-solid reaction and oxidation resistance of silicon carbide coating on carbon fibers10.1111/jace.14179 ↗
25. Silicon carbide whiskers: preparation and high dielectric permittivity10.1111/jace.12393 ↗
26. Microwave sintering of ceramics, composites and metallic materials, and melting of glasses10.1080/0371750X.2006.11012292 ↗
27. Microwave heating processing as alternative of pretreatment in second-generation biorefinery: an overview10.1016/j.enconman.2017.01.004 ↗
28. Novel synthesis of silicon carbide nanotubes by microwave heating of blended silicon dioxide and multi-walled carbon nanotubes: the effect of the heating temperature10.1016/j.ceramint.2016.08.080 ↗
29. Synthesis of β-SiC powder by use of microwave radiation10.1557/JMR.1994.3025 ↗
30. Oxidation and defect control of CVD SiC coating on three-dimensional C/SiC composites10.1016/S0008-6223(02)00103-3 ↗
31. Effect of temperature on the synthesis of SiC coating on carbon fibers by the reaction of SiO with the deposited pyrolytic carbon layer10.1016/S1005-0302(10)60035-7 ↗
32. Improving the oxidation resistance of carbon fibers using silicon oxycarbide coatings10.1016/S1872-5805(15)60188-3 ↗
33. Synthesis of tubular silicon carbide (SiC) from a carbon-silica material by using a reactive replica technique: mechanism of formation of SiC10.1016/j.actamat.2003.12.033 ↗
34. Investigation of the degradation of pitch-based carbon fibers properties upon insufficient or excess thermal treatment
35. Oxidation behavior of SiC whiskers at 600–1400 °C in air10.1111/jace.13096 ↗
36. Oxidation protection of carbon fibers by a reaction sintered nanostructured SiC coating10.1016/j.surfcoat.2011.07.016 ↗
37. Improved interfacial adhesion in carbon fiber/epoxy composites through a waterborne epoxy resin sizing agent10.1002/app.44757 ↗
38. Preparation and properties of carbon fiber/Si3N4 composites
39. Self-cleaning surfaces - virtual realities10.1038/nmat856 ↗
40. Processing and properties of SiC/vinyl ester nanocomposites10.1088/0957-4484/15/9/038 ↗
41. Surface roughness and contact angle10.1021/j150474a015 ↗
42. Wettability of hierarchically-textured ceramic coatings produced by suspension HVOF spraying10.1039/C5TA02130H ↗
43. Carbon nanotube grafted carbon fibres: a study of wetting and fibre fragmentation10.1016/j.compositesa.2010.04.004 ↗
44. Influence of surface roughness on water- and oil-repellent surfaces coated with nanoparticles10.1016/j.apsusc.2004.07.016 ↗
45. Exclusion of salt solutions from activated carbon pores and the relationship to contact angle on graphite10.1021/jp066800z ↗
46. Influence of the surface properties of silicon carbide on the process of SiC particles codeposition with nickel10.1016/S0927-7757(02)00153-X ↗