Oxidation protection of Ti–6Al–4V alloy using a novel glass–amorphous silica composite coating
Source abstract
Abstract
Abstract A novel glass–amorphous silica composite coating was prepared by the slurry method in order to improve the oxidation resistance of Ti–6Al–4V alloy at high temperatures. The microstructure of the as-prepared composite coating was analyzed by SEM, XRD and EDS techniques. The oxidation resistance and the microstructure evolution of the composite coating at 800 °C for 50 h were also studied. The results show that mass gains of the specimens coated with the composite coating were far less than that of the uncoated ones after oxidation of 50 h. Thick oxide scales composed of plate-like rutile TiO 2 and some granular α-Al 2 O 3 formed on bare Ti–6Al–4V alloy, while quartz, cristobalite and diopside were observed in the composite coating, which are useful crystals for slowing the inward diffusion of oxygen to the substrate. The cross-sectional EDS line scanning images show that inward diffusion of oxygen and outward diffusion of Ti through the composite coating were insignificant. The microhardness profile reveals that the solid solution oxygen in Ti–6Al–4V alloy with composite coating was limited.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Intermetallics and Advanced Alloy Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Gamma titanium aluminides as prospective structural materials10.1016/S0966-9795(00)00073-X ↗
2. Thermodynamic aspects of TiAl and TiSi2 oxidation: the Al–Ti–O and Si–Ti–O phase diagrams10.1007/BF00666500 ↗
3. Influence of sol-gel derived Al2O3 film on the oxidation behavior of a Ti3Al based alloy10.1016/j.msea.2005.09.078 ↗
4. Effect of Nb on the high temperature oxidation of Ti–(0–50at%) Al10.1016/S1359-6462(02)00042-8 ↗
5. Review of the effect of alloy composition on the growth rates of scales formed during oxidation of gamma titanium aluminide alloys10.1016/S0921-5093(02)00064-3 ↗
6. Liquid-phase siliconizing and aluminizing at the surface of a Ti3Al-based alloy and improvement in oxidation resistance10.1557/JMR.2004.0137 ↗
7. Liquid-phase siliconizing by Al–Si alloys at the surface of a TiAl-based alloy and improvement in oxidation resistance10.1016/j.actamat.2004.02.008 ↗
8. Oxidation behavior of TiAl/TiAl–SiC gradient coatings on gamma titanium aluminides10.1016/S0257-8972(00)00694-0 ↗
9. Microalloying effects in the oxidation of TiAl materials10.1016/S0966-9795(99)00032-1 ↗
10. Improved oxidation resistance of Ti with a thermal sprayed Ti3Al(O)–Al2O3 composite coating10.1016/S1359-6462(03)00133-7 ↗
11. Effect of cracking in diffusion aluminide coatings on their cyclic oxidation performance on Ti-based IMI-834 alloy10.1016/j.corsci.2009.03.027 ↗
12. Amorphous sol–gel SiO2 film for protection of Ti6Al4V alloy against high temperature oxidation10.1016/j.surfcoat.2006.11.004 ↗
13. Amorphous sol-gel SiO2 film for protection of an orthorhombic phase alloy against high temperature oxidation10.1007/s10971-008-1863-4 ↗
14. Codeposition of Al and Si to form oxidation-resistant coatings on γ-TiAl by the pack cementation process10.1016/S0254-0584(02)00551-5 ↗
15. Effects of Al-21Ti-23Cr coatings on oxidation and mechanical properties of TiAl alloy10.1016/S0257-8972(02)00046-4 ↗
16. Oxidation protection of gamma-titanium aluminide using glass-ceramic coatings10.1016/j.surfcoat.2008.12.029 ↗
17. Microstructure, properties and oxidation behavior of the glass–ceramic based coating on near-α titanium alloy10.1016/j.surfcoat.2009.02.016 ↗
18. Microstructure and properties characterisation of the double layered glass–ceramic coating on near-α titanium alloy10.1016/j.surfcoat.2010.04.008 ↗
19. Preparation and oxidation behavior of SiO2–Al2O3-glass composite coating on Ti–47Al–2Cr–2Nb alloy10.1016/j.surfcoat.2012.12.022 ↗
20. Oxidation and hot corrosion behavior of a novel enamel–Al2O3 composite coating on K38G superalloy10.1016/j.surfcoat.2005.09.004 ↗
21. The oxidation and oxygen permeation resistance of quartz particle-reinforced aluminosilicate glass coating on titanium alloy10.1111/j.1551-2916.2011.04587.x ↗
22. Crystallization kinetics of binary borosilicate glass composite10.1557/JMR.1992.3103 ↗
23. Preparation and characterization of CaO–Al2O3–SiO2 glass/fused silica composites for LTCC application10.1016/j.jallcom.2012.04.004 ↗
24. Sinterability, microstructure and properties of glass/ceramic composites10.1016/S0272-8842(02)00112-8 ↗
25. Effect of cristobalite formation on sinterability, microstructure and properties of glass/ceramic composites10.1016/S0272-8842(01)00067-0 ↗
26. Oxidation of Ti–6Al–4V alloy10.1016/j.jallcom.2008.04.024 ↗
27. V. Y., Thermal stability and oxidation resistance of laser clad TiVCrAlSi high entropy alloy coatings on Ti–6A–4V alloy10.1016/j.surfcoat.2011.08.063 ↗
28. Mechanical and tribological properties of calcia–magnesia–alumina–silica–based glass–ceramics prepared by in situ crystallization10.1016/j.msea.2005.09.131 ↗