Novel multifunctional capacitor-varistor ceramics based on SnO2
Source abstract
Abstract
Abstract Up to now, multifunctional varistor-capacitor materials were based on TiO2, even though these materials failed to have practical applications. For the first time, in this research, multifunctional varistor-capacitor properties are observed in the CuO-doped SnO2-CoO-Sb2O3 system. The XRD analysis showed that this system has a single phase microstructure. SEM images indicated that the CuO addition resulted in a better densification and larger grain size. The very low electric breakdown field of the CuO-doped SnO2-CoO-Sb2O3 system (12 V/mm, similar to TiO2), is a consequence of coarse-grained microstructure. This varistor had a suitable surge withstand capability as well. The colossal dielectric constant of about 4.5 * 104 was observed in CuO doped-SnO2 system. This immense constant dielectric can be explained by the internal barrier layer capacitor model. These results attest that the novel multifunctional varistor-capacitor materials based on SnO2 can be used in practical applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dielectric properties of ceramics · Multiferroics and related materials · Ferroelectric and Piezoelectric Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Application of zinc oxide varistors10.1111/j.1151-2916.1990.tb05232.x ↗
2. Homogeneous/inhomogeneous‐structured dielectrics and their energy‐storage performances
3. Nonlinear electrical properties of TiO2–Y2O3–Nb2O5 capacitor-varistor ceramics10.1016/S0921-5107(01)00563-3 ↗
4. SnO2, ZnO and related polycrystalline compound semiconductors: an overview and review on the voltage-dependent resistance (non-ohmic) feature10.1016/j.jeurceramsoc.2007.06.011 ↗
5. Microstructure, electrical properties, and failure prediction in low clamping voltage zinc oxide varistors10.1063/1.332305 ↗
6. ZnO microvaristors doped polymer composites with electrical field dependent nonlinear conductive and dielectric characteristics10.1016/j.matlet.2016.02.016 ↗
7. Novel niobium‐doped titania varistor with added barium and bismuth10.1111/j.1151-2916.1993.tb03700.x ↗
8. (Ge, GeO2, Ta2O5, BaCO3) co-doping TiO2 varistor ceramics10.1016/j.jallcom.2015.05.112 ↗
9. Varistor, dielectric, and luminescent properties of pr6O11-doped TiO2 multifunctional ceramics10.1111/jace.14251 ↗
10. Effect of thermal treatment on TiO2 varistor properties in different atmospheres10.1016/j.jeurceramsoc.2017.04.021 ↗
11. Effect of SrO on the electrical barrier formation and microstructure of TiO2 varistors10.1016/j.matchemphys.2016.09.029 ↗
12. Electron-pinned defect-dipoles for high-performance colossal permittivity materials10.1038/nmat3691 ↗
13. A new SnO2 based varistor10.1007/BF00253373 ↗
14. Fine-grained SnO2 varistors prepared by microwave sintering for ultra-high voltage applications10.1016/j.matlet.2018.07.081 ↗
15. Microstructure and electrical properties in SnO2 ceramics with sequential addition of Co, Sb and Ca10.1088/0022-3727/40/22/035 ↗
16. The effect of TiO2 addition on microstructure and electrical properties of SnO2 varistors prepared from nanomaterials10.1016/j.ceramint.2015.01.146 ↗
17. Novel SnO2 ceramic surge absorbers for low voltage applications10.1016/j.matlet.2015.01.148 ↗
18. Effect of seed addition on SnO2-based varistors for low voltage application10.1111/jace.12064 ↗
19. Controlling the breakdown electric field in SnO2 based varistors by the insertion of SnO2 nanobelts10.1016/j.jeurceramsoc.2016.12.018 ↗
20. Effects of Sb and Nb dopants on electrical and microstructural properties of low-voltage varistor ceramics based on SnO210.1016/j.ceramint.2018.01.219 ↗
21. The control of abnormal grain growth in low-voltage SnO2 varistors by microseed addition10.1016/j.ceramint.2017.11.129 ↗
22. Origin of the high permittivity and varistor behavior in SnO2–Zn2SnO4 composite ceramics10.1111/jace.13579 ↗
23. Varistor and giant permittivity properties of SnO2–Zn2SnO4 ceramic matrix composites
24. Influence of the concentration of Sb2O3 on the electrical properties of SnO2 varistors
25. Nonlinear I–V characteristics of doped SnO210.1016/j.mseb.2004.02.003 ↗
26. Investigation of electrical properties of SnO2·Co2O3·Sb2O3 varistor system10.1016/S0921-4526(01)01026-2 ↗
27. Low voltage varistor ceramics based on SnO210.1007/s12034-007-0092-8 ↗
28. Microstructural developments and electrical properties of novel coarse-grained SnO2 varistors obtained by CuO addition for low-voltage applications10.1016/j.ceramint.2018.07.067 ↗
29. the effect of Sm2O3 on the microstructure and electrical properties of SiO2-doped SnO2-Zn2SnO4 ceramic varistors10.1016/j.ceramint.2017.03.100 ↗
30. Varistor and dielectric properties of SiO2 doped SnO2-Zn2SnO4 ceramic composites10.1016/j.ceramint.2016.08.125 ↗
31. Microstructural morphology and electrical properties of copper- and niobium-doped tin dioxide polycrystalline varistors10.1111/j.1551-2916.2006.01076.x ↗
32. Sintering temperature dependence of grain boundary resistivity in a rare-earth-doped ZnO varistor10.1111/j.1551-2916.2006.01338.x ↗
33. Colossal dielectric permittivity in (Al, Nb) co-doped rutile SnO2 ceramics with low loss at room temperature10.1063/1.4964121 ↗
34. Giant barrier layer capacitance effects in CaCu3Ti4O12 ceramics10.1002/1521-4095(20020916)14:18<1321::AID-ADMA1321>3.0.CO;2-P ↗
35. The physics of zinc oxide varistors10.1063/1.323391 ↗