Solid-phase combustion synthesis of calcium aluminate with CaAl2O4 nanofiber structures
Source abstract
Abstract
Abstract Calcium aluminate with CaAl2O4 (CA) nanofiber structures was fabricated through a facile solid-phase combustion synthesis method with raw materials of CaO2, CaCO3, Al, and Al2O3 in Ar atomosphere at a pressure of 0.1 MPa. The results indicated that the relative content of CA decreased, but that of Ca12Al14O33 (C12A7) increased with the increase of r-value from 0 to 0.5 (r is molar substitution coefficient of CaCO3 for CaO2). Interestingly, CA nanofibers with tens of micrometers in length and about 200 nm in diameter were observed in the combustion products with r = 0.2, 0.3, 0.4, respectively. The more nanofibers can be found in the products, as the content of CaCO3 in raw material ratios increased. And the yield of nanofibers in the combustion product with r = 0.4 is the highest. The typical round droplet on head of nanofiber indicated that the growth process of nanofibers was governed by vapor-liquid-solid (VLS) mechanism with base growth mode. It is proposed that both higher reaction temperature and reducing atmosphere are requirements for the growth of CA nanofiber during the process of combustion synthesis. The nanofiber cannot be generated in the samples r0, and r5, because the gaseous Ca is absent due to oxidizing atmosphere and lower reaction temperature, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Luminescence Properties of Advanced Materials · Advanced ceramic materials synthesis · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Castable refractory concretes10.1179/095066001101528439 ↗
2. Blue emission properties of Eu-doped CaAl2O4 phosphors synthesized by a flux method10.1016/j.mseb.2007.07.048 ↗
3. Effect of flux on the properties of CaAl2O4:Eu2+, Nd3+ long afterglow phosphor10.1016/j.jallcom.2007.04.013 ↗
4. Combustion synthesis of long-persistent luminescent MAl2O4: Eu 2+, R3+, (M = Sr, Ba, Ca, R = Dy, Nd and La) nanoparticles and luminescence mechanism research10.1016/j.actamat.2006.12.018 ↗
5. Size and morphology control by planetary ball milling in CaAl2O4:Eu2+ phosphors prepared by Pechini method and their luminescence properties
6. Synthesis of calcium aluminate nanoflakes and nanochains from the woody biomass10.1016/j.matchar.2015.10.022 ↗
7. Preparation, characterization and luminescence properties of Eu doped CaAl2O4 nanocones10.1142/S0217984913410182 ↗
8. Preparation, characterization, and luminescent properties of CaAl2O4:Eu2+, Nd3+ nanofibers using core-sheath CaAl2O4: Eu2+, Nd3+/carbon nanofibers as templates
9. History and recent developments in SHS10.1016/0272-8842(95)96211-7 ↗
10. Self-propagating high-temperature synthesis of advanced materials and coatings
11. Combustion synthesis of zero-, one-, two- and three-dimensional nanostructures: current trends and future perspectives10.1016/j.pecs.2017.07.002 ↗
12. Fuel mixture approach for solution combustion synthesis of Ca3Al2O6 powder10.1016/j.cemconres.2009.03.014 ↗
13. Calcium aluminate-diatomaceous earth composite as a reactive filter material for aqua defluoridation10.1016/j.jwpe.2015.11.012 ↗
14. Calcium aluminate cement-based compositions for biomaterial applications10.1016/j.ceramint.2016.04.092 ↗
15. Combustion synthesis of calcium aluminates10.1016/0025-5408(96)00112-2 ↗
16. Synthesis of the long-persistence phosphor CaAl2O4:Eu2+, Dy3+, Nd3+ by combustion method and its luminescent properties
17. Auto-ignition combustion synthesis of calcium aluminate ceramic powders10.1080/00102200701600846 ↗
18. Defluoridation of water using calcium aluminate material10.1016/j.cej.2012.07.065 ↗
19. Chemical preparation of the binary compounds in the calcia–alumina system by self-propagating combustion synthesis10.1111/j.1151-2916.1998.tb02706.x ↗
20. Solution combustion synthesis and sintering behavior of CaAl2O410.1016/j.ceramint.2011.07.020 ↗
21. Combustion synthesis of Ca1−xCuxAl2O4 (x = 0.0, 0.4 and 0.8) copper doped calcium aluminate10.1016/j.ceramint.2008.04.028 ↗
22. Determination of phase content of Si3N4 by X-ray diffraction analysis
23. Rogachev · 2014 · 210
24. Ye · 2002
25. Thermodynamic analysis of combustion synthesis of calcium aluminate in CaO-Al-Al2O3-CaCO3-O2 system
26. Dissolution-precipitation mechanism of combustion synthesis of calcium aluminate10.1016/j.ceramint.2017.08.167 ↗
27. The gaseous species of the Al-Al2O3 system10.1021/ja01155a090 ↗
28. A mass spectrometric study of gaseous species in the Al-Al2O3 system10.1063/1.1741963 ↗
29. Selective growth of Al2O3 nanowires and nanobelts
30. Thermodynamic of dissociation and sublimation of calcium oxide
31. The Ca-O (calcium-oxygen) system10.1007/BF02880517 ↗
32. Effusion mass spectrometric determination of thermodynamic properties of the gaseous mono- and di-hydroxides of calcium and KCaO(g)10.1039/f19878303229 ↗
33. Single-crystal apatite nanowires sheathed in graphitic shells: synthesis, characterization, and application10.1021/nn305767t ↗