The physical and mechanical properties of alumina-based ultralow cement castable refractories
Source abstract
Abstract
Abstract In this study, the effects of the type of alumina on the physical, chemical and mechanical properties of the ultralow cement castable (ULCC) refractories were investigated. Brown fused alumina, tabular alumina and rotary bauxite-based ULCC refractories were prepared by mixing each type of alumina with silicon carbide, carbon, cement, metallic silicon and microsilica. The density, porosity and cold crushing strength (CCS) of the refractory castables were measured after drying at 110 °C for 24 h and firing at 1450 °C for 5 h. The slag penetration resistance of the refractory castables was determined using slag corrosion tests. Scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX) and X-ray diffractometry (XRD) were used to characterize the castables. It was found that all three refractory castables had strong slag penetration resistance and that the tabular alumina-based refractory castable had the largest specific cold crushing strength with an acceptable percent of porosity among the refractory castables.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Layered Double Hydroxides Synthesis and Applications · Advanced ceramic materials synthesis · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Influence of the thermal history on the mechanical properties of two alumina based castables10.1016/j.jeurceramsoc.2009.05.052 ↗
2. Room temperature mechanical properties of high alumina refractory castables with spinel, periclase and dolomite additions10.1016/j.jeurceramsoc.2008.04.019 ↗
3. Effect of thermal treatment on damage mechanical behaviour of refractory castables: Comparison between bauxite and andalusite aggregates10.1016/j.jeurceramsoc.2008.03.048 ↗
4. The role of hydraulic binders on magnesia containing refractory castables: Calcium aluminate cement and hydratable alumina10.1016/j.ceramint.2009.04.023 ↗
5. Mechanisms of reaction of hydratable aluminas10.1111/j.1551-2916.1999.tb20085.x ↗
6. Hydration of refractory oxides in castable bond systems—I: Alumina, magnesia and alumina-magnesia mixtures, J10.1016/S0955-2219(01)00299-0 ↗
7. Effect of zircon additions on low and ultra-low cement alumina and bauxite castables10.1016/j.ceramint.2005.12.019 ↗
8. Microstructure and refractory properties of spinel containing castables10.1016/j.ceramint.2010.02.015 ↗
9. Refractory cement-free castables: Properties and potential uses in metallurgy10.1007/s11148-005-0074-6 ↗
10. Effect of spinel content on slag attack resistance of high alumina refractory castables10.1016/j.jeurceramsoc.2007.04.007 ↗
11. Bosall · 1985 · vol. 13
12. Influence of additives on nano-SiC whisker formation in alumina silicate–SiC–C monolithic refractories10.1016/j.ceramint.2009.09.042 ↗
13. Hot bending strength and creep behaviour at 1000–1400°C of high alumina refractory castables with spinel, periclase and dolomite additions10.1016/j.jeurceramsoc.2008.05.044 ↗
14. Next generation carbon-containing refractory composites10.4028/www.scientific.net/AST.45.2246 ↗
15. Influence of additives on slag resistance of Al2O–SiO2–SiC–C refractory bond phase under reducing atmosphere10.1111/j.1151-2916.1998.tb02754.x ↗
16. Behavior of antioxidant added to carbon-containing refractories
17. Role and behaviour of additive in the carbon-containing refractory
18. New additives in carbon-bonded refractories
19. The effect of additives on Al2O3–SiO2–SiC–C ramming monolithic refractories10.3184/096034009X12570016241884 ↗
20. High temperature mechanical properties of bauxite-based SiC-containing castable10.1016/j.ceramint.2003.09.015 ↗
21. Mullite formation in tabular alumina based refractory castables with hydraulic alumina as binder
22. A. Robic, B.S. Hemingway, I.R. Fisher, Thermodynamic properties of minerals and related substance at 298.15K and 1bar pressure and at higher temperatures, Technical Report 01 Jan 1978, USGS-BULL-1452.