journal article·2009-04

Paper derived SiC–Si3N4 ceramics for high temperature applications

Hanadi Ghanem, Helmut Gerhard, Nadejda Popovska

Ceramics International· Volume 35· Issue 3
Publisher page

Abstract

Abstract Biomorphic Si3N4–SiC ceramics have been produced by chemical vapour infiltration and reaction technique (CVI-R) using paper preforms as template. The paper consisting mainly of cellulose fibres was first carbonized by pyrolysis in inert atmosphere to obtain carbon bio-template, which was infiltrated with methyltrichlorosilane (MTS) in excess of hydrogen depositing a silicon rich silicon carbide (Si/SiC) layer onto the carbon fibres. Finally, after thermal treatment of this Si/SiC precursor ceramic in nitrogen-containing atmosphere (N2 or N2/H2), in the temperature range of 1300–1450 °C SiC–Si3N4 ceramics were obtained by reaction bonding silicon nitride (RBSN) process. They were mainly composed of SiC containing α-Si3N4 and/or β-Si3N4 phases depending on the nitridation conditions. The SiC–Si3N4 ceramics have been characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX) and Raman spectroscopy. Thermal gravimetric analysis (TGA) was applied for the determination of the residual carbon as well as for the evaluation of the oxidation behaviour of the ceramics under cyclic conditions. The bending strength of the biomorphic ceramics was related to their different microstructures depending on the nitridation conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. Watchman · 1996
2. Influence of yttria-alumina content on sintering behavior and microstructure of silicon nitride10.1111/j.1151-2916.2000.tb01520.x ↗
3. Effect of silicon carbide nano dispersion on the mechanical properties of silicon nitride10.1111/j.1151-2916.1994.tb04545.x ↗
4. Low-cost preparation of Si3N4–SiC micro/nano composites by in situ carbothermal reduction of silica in silicon nitride matrix10.1016/S0955-2219(03)00604-6 ↗
5. Gel casting and properties of porous silicon carbide/silicon nitride composite ceramics10.1016/j.matlet.2004.07.059 ↗
6. Fabrication of continuously porous SiC–Si3N4 composite using SiC powder by extrusion process10.1016/j.jeurceramsoc.2005.06.038 ↗
7. Application of the chemical vapor infiltration and reaction technique (CVI-R) for the preparation of high porous biomorphic SiC ceramics derived from paper10.1016/j.jeurceramsoc.2004.04.006 ↗
8. Processing of biomorphic Si3N4 ceramics by CVI-R technique with SiCl4/H2/N2 system10.1016/j.jeurceramsoc.2006.06.008 ↗
9. Paper derived biomorphic porous titanium carbide and titanium oxide ceramics produced by chemical vapor infiltration and reaction (CVI-R)10.1016/j.jeurceramsoc.2004.04.007 ↗
10. Processing of biomorphic porous Tio2 ceramics by chemical vapor infiltration and reaction (CVI-R) technique10.1016/j.jeurceramsoc.2007.02.197 ↗
11. Determination of phase content of Si3N4 by X-ray diffraction analysis
12. Mechanical properties and oxidation resistance of SiC–Si3N4 nano composites10.1016/S1359-6462(01)00885-5 ↗