Tribological Properties of Complex Calcium Sulfonate Grease with Ultrafine SiO2/MoS2 Powders
Source abstract
Abstract
For the development of complex calcium sulfonate grease containing ultrafine SiO2/MoS2 powders with self-reparing performance. On the basis of the dispersion of the nanoSiO2 particles, the effects of particle size,addition amount,load and the mass ratio of nanoSiO2 to ultrafine MoS2 powders on the tribological properties of commercial No.2 complex calcium sulfonate grease were systematically studied by four ball friction and wear tester. The results show that suitable particle size and addition amount of single SiO2 and MoS2 powders can significantly reduce the coefficient of friction (COF) and the wear scar diameter (WSD) of the grease. The composite of nanoSiO2 and MoS2 powder can broaden the load range of base grease and further improve the tribological properties of complex calcium sulfonate grease. When the mass ratio of nanoSiO2 powder to MoS2 powder is 3:7 and the total addition amount is 0.8wt%, the COF and the WSD of the grease are decreased by 53.64% and 27.08%, respectively, compared with the base grease. The two powders in the composite grease have synergy effect for improving the tribological performance and the friction stability of the grease during the process of long friction.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Lubricants and Their Additives · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Nanjing Tech University
References (19)
Show source-provided references
1. Lugt, P.M.: A Review on Grease Lubrication in Rolling Bearings. Tribol. T. 52, 470-480(2009). https://doi.org/10.1080/10402000802687940.10.1080/10402000802687940 ↗
2. Chen, J.: Tribological Properties of Polytetrafluoroethylene, Nano-Titanium Dioxide, and Nano-Silicon Dioxide as Additives in Mixed Oil-Based Titanium Complex Grease. Tribol. Lett. 38, 217-224(2010). https://doi.org/10.1007/s11249-010-9593-5.10.1007/s11249-010-9593-5 ↗
3. Shu, J., Harris, K., Munavirov, B., Westbroek, R., Leckner, J., Glavatskih, S.: Tribology of polypropylene and Li-complex greases with ZDDP and MoDTC additives. Tribol. Int. 118, 189-195(2018). https://doi.org/10.1016/j.triboint.2017.09.028.10.1016/j.triboint.2017.09.028 ↗
4. Zhao, F., Tang, Y., Wang, P., Zhang, Z., Yang, J.: Study on Tribological Properties of Lithium Base Grease Added with Nano-bismuth Powders. Bearing. 26-29(2011).
5. Qu, M., Zhao, F., Zhang, Z., Zheng, W.: Study on the Tribological Properties of Ultrafine Tin Powder for Lithium Grease. Petroleum Processing and Petrochemicals. 42, 71-74(2011).
6. Bai, P., Li, S., Tao, D., Jia, W., Meng, Y., Tian, Y.: Tribological properties of liquid-metal galinstan as novel additive in lithium grease. Tribol. Int.128, 181-189(2018). https://doi.org/10.1016/j.triboint.2018.07.036.10.1016/j.triboint.2018.07.036 ↗
7. Ren, R., Zhou, X.: Parameter estimation with stepwise type-I interval censored data. Journal of Nanjing Normal University (Natural Science Edition). 34, 7-12(2011).
8. Draoui, A., Zidour, M., Tounsi, A., Adim, B.: Static and Dynamic Behavior of Nanotubes-Reinforced Sandwich Plates Using (FSDT). J Nano Res-Sw.57, 117-135(2019). https://doi.org/10.4028/www.scientific.net/JNanoR.57.117.10.4028/www.scientific.net/jnanor.57.117 ↗
9. Khosravi, F., Hosseini, S.A., Tounsi, A.: Forced Axial Vibration of a Single-Walled Carbon Nanotube Embedded in Elastic Medium under Various Moving Forces. J Nano Res-Sw. 63:112-133(2020). https://doi.org/10.4028/www.scientific.net/JNanoR.63.112.10.4028/www.scientific.net/jnanor.63.112 ↗
10. Al-Furjan, M.S.H., Habibi, M., Rahimi, A., Chen, G., Safarpour, H., Safarpour, M., Tounsi, A.: Chaotic simulation of the multi-phase reinforced thermo-elastic disk using GDQM. Eng Comput-Germany. 8(2020). https://doi.org/10.1007/s00366-020-01144-2.10.1007/s00366-020-01144-2 ↗
11. Al-Furjan, M.S.H., Safarpour, H., Habibi, M., Safarpour, M., Tounsi, A.: A comprehensive computational approach for nonlinear thermal instability of the electrically FG-GPLRC disk based on GDQ method. Eng Comput-Germany. 6(2020). https://doi.org/10.1007/ s00366-020-01088-7.10.1007/s00366-020-01088-7 ↗
12. Zhou, Y., Bosman, R., Lugt, P.M.: On the shear stability of dry and water-contaminated calcium sulfonate complex lubricating greases. Tribol. T. 62, 626-634(2019). https://doi.org/10.1080/10402004.2019.1588445.10.1080/10402004.2019.1588445 ↗
13. Sniderman, D.: Calcium sulfonate complex greases. Tribol. Lubr. Technol. 72, 28(2016).
14. Sun, L., Zhang, Z., Zhao, F., Wu L.: Preparation of ultrafine serpentine powder and its effect on tribological properties of water-glycol hydraulic fluid. Petroleum Refining and Chemical Industry. 50, 86-90(2019).
15. Rawat, S.S., Harsha, A.P., Deepak, A.P.: Tribological performance of paraffin grease with silica nanoparticles as an additive. Appl. Nanosci. 9, 305-315. https://doi.org/10.1007/ s13204-018-0911-9.10.1007/s13204-018-0911-9 ↗
16. Ge, X., Xia, Y., Cao, Z.: Tribological properties and insulation effect of nanometer TiO2 and nanometer SiO2 as additives in grease. Tribol. Int. 92, 454-461(2015). https://doi.org/10.1016/j.triboint.2015.07.031.10.1016/j.triboint.2015.07.031 ↗
17. Gang, L.: Study on the film formation mechanism and lubrication characteristics of greases under severe conditions. University of Tsinghua, Beijing(2010).
18. Nehme, G.: The importance of variable speeds under extreme pressure loading in molybdenum disulfide greases using four-ball wear tests. Tribol. T. 56, 977-985(2013). https://doi.org/10.1080/10402004.2013.816812.10.1080/10402004.2013.816812 ↗
19. Xie, H., Jiang, B., Peng, C., Pan, F.: Tribological properties and lubrication mechanism of SiO2/MoS2 composite nano-based lubricants in cold rolling of magnesium alloys. Materials Review, 32, 1276-1282(2018).