Mechanical, Structural and Thermal Properties of Multilayered Gradient Nanocomposite Coatings
Source abstract
Abstract
Multilayered, Gradient Tialsin-Based Nanocomposite Coatings Have Been Developed and Investigated with Respect to their Applicability in the Machining Industry. the Main Coating Layer Was Composed of 5-8 Nm Tin and Aln Nanograins. the Coating Possessed Hardness as High as 40 GPA, which Allows it to Be Classified as Superhard. during Heating up to 900oC in Air in Steps of 100oC for 6 H at each Temperature, the Coating Showed Good Stability up to 700oC. Thermal Treatment over this Temperature Caused a Decrease in the Hardness to Values Characteristic for Tialn Multilayered Coatings, while the Adhesion to the Substrate Remained Steady.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Bulgarian Academy of Sciences
Aristotle University of Thessaloniki
References (33)
Show source-provided references
1. D. McIntyre, J.E. Greene, G. Håkansson, J.E. Sundgren W.D. Münz, J.: Appl. Phys. Vol. 67 (1990), p.1542.10.1063/1.345664 ↗
2. W. D. Sproul, M.E. Graham, M.S. Wong, P.J. Rudnik: Surf. Coat. Technol. Vol. 61 (1993), p.139.10.1016/0257-8972(93)90216-B ↗
3. V. H. Derflinger, A. Schütze, M. Ante: Surf. Coat. Technol. Vol. 200 (2006), p.4693.10.1016/j.surfcoat.2005.02.065 ↗
4. S. Veprek, M. J.G. Veprek-Heijman: Surf. Coat. Technol. Vol. 202 (2008), p.5063.10.1016/j.surfcoat.2008.05.038 ↗
5. P. Holubar, M. Jilek, M. Sima: Surf. Coat. Technol. Vol. 120–121 (1999), p.184.10.1016/S0257-8972(99)00483-1 ↗
6. S. Veprek, A. Niederhofer, K. Moto, T. Bolom, H.D. Mannling, P. Nesladek, et al.: Surf. Coat. Technol. Vol. 133–134 (2000), p.152.10.1016/S0257-8972(00)00957-9 ↗
7. A. Niederhofer, P. Nesladek, H.D. Mannling, K. Moto, S. Veprek, M. Jilek: Surf. Coat. Technol. Vol. 120–121 (1999), p.173.10.1016/S0257-8972(99)00451-X ↗
8. S. Veprek, S. Reiprich, Li Shizhi: Appl. Phys. Lett. Vol. 66 (1995), p.2640.10.1063/1.113110 ↗
9. S. Zhang, D. Sun, Y. Fu, H. Du: Surf. Coat. Technol. Vol. 167 (2003), p.113.10.1016/S0257-8972(02)00903-9 ↗
10. C. H. Zhang, X.C. Lu, H. Wang, J.B. Luo, Y.G. Shen, K.Y. Li: Appl. Surf. Sci. Vol. 252 (2006), p.6141.10.1016/j.apsusc.2005.04.056 ↗
11. F. Vaz, L. Rebouta, S. Ramos, M.F. da Silva, J.C. Soares: Surf. Coat. Technol. Vol. 108–109 (1998), p.236.10.1016/S0257-8972(98)00620-3 ↗
12. L. Rebouta, C.J. Tavares, R. Aimo, Z. Wang, K. Pischow, E. Alves et al.: Surf. Coat. Technol. Vol. 133–134 (2000), p.234.10.1016/S0257-8972(00)00934-8 ↗
13. S. Ma, J. Prochazka, P. Karvankova, Q. Ma, X. Niu, X. Wang et al.: Surf. Coat. Technol. Vol. 194 (2005), p.143.10.1016/j.surfcoat.2004.05.007 ↗
14. I. W. Park, S.R. Choi, J.H. Suh, C.G. Park, K.H. Kim.: Thin Solid Films Vol. 447–448 (2004), p.443.10.1016/S0040-6090(03)01122-2 ↗
15. Y.H. Cheng, T. Browne, B. Heckerman, E.I. Meletis: Surf. Coat. Technol. Vol. 204 (2010) p.2123.10.1016/j.surfcoat.2009.11.034 ↗
16. S. Veprek, H.D. Männling, M. Jilek, P. Holubar: Mater. Sci. Eng. A Vol. 366 (2004), p.202.10.1016/j.msea.2003.08.052 ↗
17. M. Jilek, T. Cselle, P. Holubar, M. Morstein, M.G.J. Veprek-Heijman, S. Veprek: Plasma. Chem. Plasma Process. Vol. 24 (2004), p.493.10.1007/s11090-004-7929-3 ↗
18. N. Jiang, Y.G. Shen, H.J. Zhang, S.N. Bao, X.Y. Hou: Mater. Sci. Eng. B Vol. 135 (2006), p.1.10.1016/j.mseb.2006.06.043 ↗
19. S. M. Yang, Y.Y. Chang, D.Y. Lin, D.Y. Wang, W. Wu: J. Nanosci. Nanotechnol. Vol. 8 (2008), p.2688.10.1166/jnn.2008.592 ↗
20. S. Veprek, R.F. Zhang, M.G.J. Veprek-Heijman, S.H. Sheng, A.S. Argon: Surf. Coat. Technol. Vol. 204 (2010), p.1898.10.1016/j.surfcoat.2009.09.033 ↗
21. K. Lukaszkowicz, J. Sondor, A. Kriz, M. Pancielejko: J. Mater. Sci. Vol. 45 (2010), p.1629.10.1007/s10853-009-4140-1 ↗
22. M.G. Faga, G. Gautier, R. Calzavarini, M. Perucca, E. Aimo Boot, F. Cartasegna, L. Settineri: Wear Vol. 263 (2007), p.1306.10.1016/j.wear.2007.01.109 ↗
23. Yin-Yu Chang, Sheng-Min Yang: Thin Solid Films Vol. 518 (2010) p. S34.10.1016/j.tsf.2010.03.020 ↗
24. PC Powder Diffraction Files, JCPDS-ICDD, (2000).
25. B. Cullity, S. Stock, Elements of X-Ray Diffraction, 3rd ed., Prentice Hall, New Jersey, (2001).
26. Y H Cheng, T Browne, B Heckerman, P Gannon, J C Jiang, E I Meletis, C Bowman and V Gorokhovsky: J. Phys. D: Appl. Phys. Vol. 42 (2009) 125415.10.1088/0022-3727/42/12/125415 ↗
27. T. Suzuki et al.: J. Mat. Science, Vol. 35 (2000), p.4193.10.1023/A:1004835111782 ↗
28. Sun Kyu Kim, Vinh Van Le: Thin Solid Films Vol. 518 (2010), p.7483.10.1016/j.tsf.2010.05.029 ↗
29. Handbook on Instrumented Indentation, CSM Instruments, ISO 9001.
30. W. C. Oliver, G. M. Pharr: J. Mat. Res. Vol. 7 (1992), p.1564.10.1557/JMR.1992.1564 ↗
31. P. J. Burnett, D. S. Rickerby: Thin Solid Films Vol. 137 (1988), p.233.10.1016/0040-6090(88)90006-5 ↗
32. D. S. Rickerby: Surf. Coat. Technol. Vol. 36 (1988), p.541.10.1016/0257-8972(88)90181-8 ↗
33. K. Dyrda, M. Sayer: Thin Solid Films Vols. 355-356 (1999), p.277.10.1016/S0040-6090(99)00450-2 ↗