journal article·2021-10

Mesoporous chromium oxide doped palladium catalysis for cyanation reaction of some aryl halides

Kaan Karaoğlu, Hakkı Türker Akçay, Zehra Özçifçi, Melike Çalışkan, Talat Baran

Ceramics International· Volume 47· Issue 19
Publisher page

Abstract

Abstract A Pd/Cr2O3 hybrid catalyst for cyanation reaction of some aryl halides was synthesized and characterized by XRD, SEM/EDS and TEM. The porous structure of the catalyst was also investigated by BET analysis. All XRD characteristic lines were obtained for Cr2O3 and Pd/Cr2O3 hybrid in good agreement with the reference XRD data. It was found that average particle size of Pd/Cr2O3 composite was about 22 nm. The catalytic efficiency of the Pd/Cr2O3–catalyzed cyanation reaction was evaluated for some m- and p-substituted aryl halides. The influence of solvent, reaction time, and base on the activity of the Pd/Cr2O3 catalyst was investigated, and the optimal reaction conditions were systematically obtained. Catalytic investigations showed that Pd/Cr2O3 hybrid can exhibit very good catalytic performance for cyanation reaction of aryl halides with a high yield of around 90%, and retained its catalytic activity throughout successive 5 cycles. Comparative TEM images of Pd/Cr2O3 hybrid catalyst, as-synthesized and after 5th cycle, showed that nano-sized structure of Pd/Cr2O3 catalyst was protected without significant change.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanomaterials for catalytic reactions · Catalytic Cross-Coupling Reactions · Advanced Photocatalysis Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Self-Assembled sandwich-like MXene-derived composites as highly efficient and sustainable catalysts for wastewater treatment10.1021/acs.langmuir.0c03297 ↗
2. Exploring the enhanced catalytic performance on nitro dyes via a novel template of flake-network Ni-Ti LDH/GO in-situ deposited with Ag3PO4 NPs10.1016/j.apsusc.2020.148821 ↗
3. Facile fabrication of molybdenum compounds (Mo2C, MoP and MoS2) nanoclusters supported on N-doped reduced graphene oxide for highly efficient hydrogen evolution reaction over broad pH range10.1016/j.cej.2021.129233 ↗
4. Preparation of PdNPs doped chitosan-based composite hydrogels as highly efficient catalysts for reduction of 4-nitrophenol10.1016/j.colsurfa.2020.125889 ↗
5. Facile preparation and highly efficient photodegradation performances of self-assembled Artemia eggshell-ZnO nanocomposites for wastewater treatment10.1016/j.colsurfa.2020.125752 ↗
6. Self-assembled Ni2P nanosheet-implanted reduced graphene oxide composite as highly efficient electrocatalyst for oxygen evolution reaction10.1016/j.colsurfa.2020.125992 ↗
7. Pd/CoFe2O4/chitosan: a highly effective and easily recoverable hybrid nanocatalyst for synthesis of benzonitriles and reduction of 2-nitroaniline10.1016/j.jpcs.2020.109772 ↗
8. Cyanation of aryl halides and Suzuki-Miyaura coupling reaction using palladium nanoparticles anchored on developed biodegradable microbeads10.1016/j.ijbiomac.2020.01.157 ↗
9. Potassium hexacyanoferrate( ii )—a new cyanating agent for the palladium-catalyzed cyanation of aryl halides10.1039/B400562G ↗
10. Pd NPs@Fe3O4/chitosan/pumice hybrid beads: a highly active, magnetically retrievable, and reusable nanocatalyst for cyanation of aryl halides10.1016/j.carbpol.2020.116105 ↗
11. Chromium(III) oxide nanoparticles induced remarkable oxidative stress and apoptosis on culture cells10.1002/tox.20695 ↗
12. Preparation and application of ordered mesoporous metal oxide catalytic materials10.1007/s10563-019-09288-y ↗
13. A general synthesis of mesoporous metal oxides with well-dispersed metal nanoparticles via a versatile sol–gel process10.1039/c3ta00570d ↗
14. Ordered mesoporous metal oxides: synthesis and applications10.1039/c2cs35086f ↗
15. Carbon foams from sucrose employing different metallic nitrates as blowing agents: application in CO2 capture10.1016/j.jaap.2019.05.016 ↗
16. Synthesis of Pd/SiO 2 catalysts in various HCl concentrations for selective NBR hydrogenation: effects of H + and Cl – concentrations and electrostatic interactions10.1021/acsomega.8b00244 ↗
17. Mesoporous metal oxide–α-Fe2O3 nanocomposites for sensing formaldehyde and ethanol at room temperature10.1016/j.jpcs.2020.109536 ↗
18. Gas adsorption/desorption isotherm for pore structure characterization
19. Mesoporous TiO2 spheres with a nitridated conducting layer for lithium-ion batteries10.1007/s10853-012-7098-3 ↗
20. Microstructural investigation of gas shale in longmaxi formation, lower silurian, NE SIchuan Basin, China10.1177/0144598716684304 ↗
21. Pd-grafted periodic mesoporous organosilica: an efficient heterogeneous catalyst for Hiyama and Sonogashira couplings, and cyanation reactions10.1039/c2gc35820d ↗
22. Activity enhancement in cyanation of aryl halides through confinement of ionic liquid in the nanospaces of SBA-15-supported Pd complex10.1039/C4RA09428J ↗
23. Green synthesis of palladium nanoparticles: applications in aryl halide cyanation and hiyama cross-coupling reaction under ligand free conditions10.1007/s10562-018-2369-5 ↗
24. Pd/CuO nanoparticles as a highly effective catalyst for the cyanation of aryl halides under ligand-free conditions10.1016/j.tetlet.2015.12.019 ↗
25. Copper-mediated cyanation of aryl halides by activation of benzyl cyanide as the cyanide source
26. Sea-island-like morphology of CuNi bimetallic nanoparticles uniformly anchored on single layer graphene oxide as a highly efficient and noble-metal-free catalyst for cyanation of aryl halides10.1038/s41598-020-57483-z ↗