Effect of laser intensity distribution period on the silver micro-stripes by laser interference induced forward transfer technology and their SERS property
Source abstract
Abstract
The micro-stripe was efficiently transferred by the laser interference-induced forward transfer (LIIFT) technique, composed of Ag nanoparticles (NPs). The effects of the fringe period of the two-beam laser interference on the transferred micro-stripe were discussed. The results showed that the fringe period of the laser interference would affect the particle diameter and spatial distribution of Ag NPs in the micro-stripe transferred. While the fringe period was in the range of 10 to 17 μm, the average diameter of the Ag NPs decreased from 126 to 101 nm with the increase of the period. Moreover, the aggregation of the Ag NPs was improved by increasing the period of the transferred Ag micro-stripe. Finally, the transferred Ag micro-stripe could promote surface-enhanced Raman scattering (SERS). The spectrum intensity of the SERS was significantly enhanced while the transferred Ag micro-stripe was used to the Raman spectrum test of the Rhodamine B (RhB), and the intensity of the Raman spectrum for the RhB was improved with the increase of the Ag NPs micro-stripe period. The results suggested a technique to fabricate the Ag NPs with controllable aggregation efficiently, and further the potential application of the LIIFT technique in the SERS chip of sensitivity detection. Graphical abstract
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gold and Silver Nanoparticles Synthesis and Applications · Nonlinear Optical Materials Studies · Spectroscopy Techniques in Biomedical and Chemical Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. Malinauskas M, Zukauskas A, Hasegawa S, Hayasaki Y, Mizeikis V, Buividas R, Juodkazis S (2016) Ultrafast laser processing of materials: from science to industry. Light: Sci Appl 5:e16133. https://doi.org/10.1038/lsa.2016.13310.1038/lsa.2016.133 ↗
2. Stankevičius E, Vilkevičius K, Gedvilas M, Bužavaitė-Vertelienė E, Selskis A, Balevičius Z (2021) Direct laser writing for the formation of large-scale gold microbumps arrays generating hybrid lattice plasmon polaritons in Vis-NIR range. Adv. Optical Mater. 2100027. https://doi.org/10.1002/adom.20210002710.1002/adom.202100027 ↗
3. Macdonald E, Salas R, Espalin D, Perez M, Aguilera E, Muse D, Wicker RB (2014) 3D printing for the rapid prototyping of structural electronics. IEEE Access 2:234–242. https://doi.org/10.1109/ACCESS.2014.231181010.1109/ACCESS.2014.2311810 ↗
4. Lopes AJ, Mcdonald E, Wicker RB (2012) Integrating stereolithography and direct print technologies for 3D structural electronics fabrication. Rapid Prototyping J 18:129–143. https://doi.org/10.1108/1355254121121211310.1108/13552541211212113 ↗
5. Stansbury JW, Idacavage MJ (2015) 3D printing with polymers: challenges among expanding options and opportunities. Dent Mater 32:54–64. https://doi.org/10.1016/j.dental.2015.09.01810.1016/j.dental.2015.09.018 ↗
6. Hadibrata W, Wei H, Krishnaswamy S, Aydin K (2021) Inverse design and 3d printing of a metalens on an optical fiber tip for direct laser lithography. Nano Lett 21:242–2428. https://doi.org/10.1021/acs.nanolett.0c0446310.1021/acs.nanolett.0c04463 ↗
7. Lao Z, Xia N, Wang S, Xu T, Wu X, Zhang L (2021) Tethered and untethered 3D microactuators fabricated by two-photon polymerization: a review. Micromachines 12:465 (1–29). https://doi.org/10.3390/mi12040465.10.3390/mi12040465 ↗
8. Liao C, Wuethrich A, Trau M (2020) A material odyssey for 3D nano/microstructures: two photon polymerization based nanolithography in bioapplications. Appl Mater Today 19:100635. https://doi.org/10.1016/j.apmt.2020.10063510.1016/j.apmt.2020.100635 ↗
9. Katsui H, Harada K, Kondo N, Hotta M (2020) Preparation of boron carbon oxynitride phosphor film via laser chemical vapor deposition and annealing. Surf Coat Tech 394:125851. https://doi.org/10.1016/j.surfcoat.2020.12585110.1016/j.surfcoat.2020.125851 ↗
10. Katsui H, Harada K, Kondo N, Hotta M (2020) Preparation of zirconium carbonitride by laser chemical vapor deposition using alkyl-amide precursor as a single source. J Ceram Soc Jpn 128:855–862. https://doi.org/10.2109/jcersj2.2008110.2109/jcersj2.20081 ↗
11. Visser CW, Pohl R, Sun C, Römer WG, Veld I, Huis B, Lohse D (2015) Toward 3D printing of pure metals by laser-induced forward transfer. Adv Mater 27:4087–4092. https://doi.org/10.1002/adma.20150105810.1002/adma.201501058 ↗
12. Breckenfeld E, Kim H, Auyeung RCY, Charipar N, Serra P, Piqué A (2015) Laser induced forward transfer of silver nanopaste for microwave interconnects. Appl Surf Sci 331:254–261. https://doi.org/10.1016/j.apsusc.2015.01.07910.1016/j.apsusc.2015.01.079 ↗
13. Sanchez-Aniorte MI, Mouhamadou B, Alloncle AP, Sarnet T, Delaporte P (2016) Laser induced forward transfer for improving fine-line metallization in photovoltaic applications. Appl Phys A 122:595 (1–5). https://doi.org/10.1007/s00339-016-0113-9.10.1007/s00339-016-0113-9 ↗
14. Zenou M, Sa’ar A, Kotler Z, (2015) Laser jetting of femto-liter metal droplets for high resolution 3D printed structures. Sci Rep 5:17265. https://doi.org/10.1038/srep1726510.1038/srep17265 ↗
15. Gorodesky N, Sedghani-Cohen S, Fogel O, Silber A, Morales M (2021) Improving compactness of 3D metallic microstructures printed by laser-induced forward transfer. Crystals 11:(1–14). https://doi.org/10.3390/cryst11030291.10.3390/cryst11030291 ↗
16. Sopea P, Fernández-Pradas JM, Serra P (2020) Laser-induced forward transfer of conductive screen-printing inks. Appl Sur Sci 507:145047. https://doi.org/10.1016/j.apsusc.2019.14504710.1016/j.apsusc.2019.145047 ↗
17. Vallabh CKP, Xiong Y, Zhao X (2021) 3D printing of liquid metal EGaIn through laser induced forward transfer: a proof-of-concept study. Manufacturing Letters 28:42–45. https://doi.org/10.1016/j.mfglet.2021.03.00410.1016/j.mfglet.2021.03.004 ↗
18. Ferreira PR, Correr W, Mendona CR (2020) Single-step printing of metallic nanoparticles in 2D micropatterns. J Nanopart Res 22:1–9. https://doi.org/10.1007/s11051-020-04995-410.1007/s11051-020-04995-4 ↗
19. Zacharatos F, Duderstadt M, Alapanis E, Pataiouras L, Kurselis K, Tsoukalas D, Reinhardt C, Papanikolaou N, Chichkov BN, Zergioti I (2020) Laser printing of Au nanoparticles with sub-micron resolution for the fabrication of monochromatic reflectors on stretchable substrates. Opt Laser Technol 135:106660. https://doi.org/10.1016/j.optlastec.2020.10666010.1016/j.optlastec.2020.106660 ↗
20. Gorodesky N, Sedghani-Cohen S, Altman M, Fogel O, Cohen-Taguri G, Fleger Y, Kotler Z, Zalevsky Z (2020) Concurrent formation of metallic glass during laser forward transfer 3D printing. Adv Funct Mater 2001260.https://doi.org/10.1002/adfm.20200126010.1002/adfm.202001260 ↗
21. Wang X, Zhang J, Mei X, Miao J, Wang X (2021) Laser-induced forward transfer of graphene oxide. Appl Phys A 127:1–9. https://doi.org/10.1007/s00339-021-04356-510.1007/s00339-021-04356-5 ↗
22. Wang X, Zhang J, Mei X, Xu B, Miao J (2021) Laser fabrication of fully printed graphene oxide microsensor. Opt Laser Eng 140:106520. https://doi.org/10.1016/j.optlaseng.2020.10652010.1016/j.optlaseng.2020.106520 ↗
23. Rapp L, Serein-Spirau F, Lère-Porte JP, Alloncle AP, Delaporte P, Fages F, Videlot-Ackermann C (2012) Laser printing of air-stable high performing organic thin film transistors. Org Electron 13:2035–2041. https://doi.org/10.1016/j.orgel.2012.06.02010.1016/j.orgel.2012.06.020 ↗
24. Makrygianni M, Verrelli E, Boukos N, Chatzandroulis S, Tsoukalas D, Zergioti I (2012) Laser printing and characterization of semiconducting polymers for organic electronics. Appl Phys A 110:559–563. https://doi.org/10.1007/s00339-012-7134-910.1007/s00339-012-7134-9 ↗
25. Tsouti V, Boutopoulos C, Goustouridis D, Zergioti I, Normand P, Tsoukalas D, Chatzandroulis S (2010) A chemical sensor microarray realized by laser printing of polymers. Sensor Actuat B: Chem 150:148–153. https://doi.org/10.1016/j.snb.2010.07.02710.1016/j.snb.2010.07.027 ↗
26. Hong J (2019) Thermo-mechanical analysis of blister formation on a rigid substrate in blister-actuated laser-induced forward transfer. IEEE T Comp Pack Man 99:1–19. https://doi.org/10.1109/TCPMT.2019.295970810.1109/TCPMT.2019.2959708 ↗
27. Schiele NR, Corr DT, Raof NA, Xie Y, Chrisey DB (2010) Laser-based direct write techniques for cell printing. Biofabrication 2:32001. https://doi.org/10.1088/1758-5082/2/3/03200110.1088/1758-5082/2/3/032001 ↗
28. Murphy SV, Atala A (2014) 3D bioprinting of tissues and organs. Nat Biotechnol 32:773–785. https://doi.org/10.1038/nbt.295810.1038/nbt.2958 ↗
29. Gruene M, Pflaum M, Deiwick A, Koch L, Schlie S, Unger C, Wilhelmi M, Haverich A, Chichkov BN (2011) Differentiation of laser-printed 3D tissue grafts consisting of human adipose-derived stem cells. Biofabrication 3:15005. https://doi.org/10.1088/1758-5082/3/1/01500510.1088/1758-5082/3/1/015005 ↗
30. Keriquel V, Guillemot F, Arnault I, Guillotin B, Miraux S, Amédée J, Fricain JC, Catros S (2010) In vivo bioprinting for computer- and robotic-assisted medical intervention: preliminary study in mice. Biofabrication 2:14101. https://doi.org/10.1088/1758-5082/2/1/01410110.1088/1758-5082/2/1/014101 ↗
31. Bohandy J, Kim BF, Adrian FJ (1986) Metal deposition from a supported metal film using an excimer laser. J Appl Phys 60:1538–1539. https://doi.org/10.1063/1.33728710.1063/1.337287 ↗
32. Wu H, Odom TW, Whitesides GM (2002) Reduction photolithography using micro-lens arrays: applications in gray scale photolithography. Anal Chem 74:3267–3273. https://doi.org/10.1021/ac020151f10.1021/ac020151f ↗
33. Sikdar D, Pendry JB, Kornyshev AA (2020) Nanoparticle meta-grid for enhanced light extraction from light-emitting devices. Light Sci Appl 9:1–11. https://doi.org/10.1038/s41377-020-00357-w10.1038/s41377-020-00357-w ↗
34. Chen H, Lee J, Lin B, Chen S, Wu S (2018) Liquid crystal display and organic light-emitting diode display: present status and future perspectives. Light Sci Appl 7:17168. https://doi.org/10.1038/lsa.2017.16810.1038/lsa.2017.168 ↗
35. Li M, Wu J, Wang C, Fang J (2020) The cascade structure of periodic micro/nanoscale Au nano-islands @ Ag-frustum arrays as effective SERS substrates.Vacuum 175:109265. https://doi.org/10.1016/j.vacuum.2020.10926510.1016/j.vacuum.2020.109265 ↗
36. Stankevičius E, Daugnoraitė E, Ignatjev I, Kuodis Z, Niaura G, Račiukaitis G (2019) Concentric microring structures containing gold nanoparticles for SERS -based applications. Appl Surf Sci 497:14375210.1016/j.apsusc.2019.143752 ↗
37. Gruene M, Pflaum M, Hess C, Diamantouros S, Schlie S, Deiwick A, Chichkov B (2011) Laser printing of three-dimensional multicellular arrays for studies of cell-cell and cell-environment interactions.Tissue Eng. Part C: Me 17:973–982. https://doi.org/10.1089/ten.tec.2011.018510.1089/ten.tec.2011.0185 ↗
38. Tseng ML, Chang CM, Chen BH, Huang YW, Chu CH, Chung KS, Liu YJ, Tsai HG, Chu NN, Huang DW, Chiang HP, Tsai DP (2012) Fabrication of plasmonic devices using femtosecond laser-induced forward transfer technique. Nanotechnology 23:444013. https://doi.org/10.1088/0957-4484/23/44/44401310.1088/0957-4484/23/44/444013 ↗
39. Li HJ, Fan WZ, Pan HH, Wang CW, Qian J, Zhao QZ (2017) Fabrication of “petal effect” surfaces by femtosecond laser-induced forward transfer. Chem Phys Lett 667:20–24. https://doi.org/10.1016/j.cplett.2016.11.02610.1016/j.cplett.2016.11.026 ↗
40. Piqué A, Kim H, Auyeung CY (2013) Laser forward transfer of functional materials for digital fabrication of microelectronics. J Imaging Sci Technol 57:040404. https://doi.org/10.2352/J.ImagingSci.Technol.2013.57.4.040404.10.1016/j.apsusc.2019.14375210.2352/J.ImagingSci.Technol.2013.57.4.040404.10.1016/j.apsusc.2019.143752 ↗
41. Garliauskas M, Stankevičius E, Račiukaitis G (2017) Laser intensity-based geometry control of periodic submicron polymer structures fabricated by laser interference lithography. Opt Mater Express 7:179–184. https://doi.org/10.1364/OME.7.00017910.1364/OME.7.000179 ↗
42. Stankevičius E, Daugnoraitė E, Račiukaitis G (2019) Mechanism of pillars formation using four-beam interference lithography. Opt Laser Eng 116:41–46. https://doi.org/10.1016/j.optlaseng.2018.12.01210.1016/j.optlaseng.2018.12.012 ↗
43. Zhang Z, Dong L, Ding Y, Li L, Weng Z, Wang Z (2017) Micro and nano dual-scale structures fabricated by amplitude modulation in multi-beam laser interference lithography. Opt Express 25:29135–29142. https://doi.org/10.1364/OE.25.02913510.1364/OE.25.029135 ↗
44. Guo X, Li L, Hu Y, Cao L, Dong L, Wang L, Yang Z (2018) Superlens-enhanced laser interference lithography. Appl Phys Express 11:125201. https://doi.org/10.7567/APEX.11.12520110.7567/APEX.11.125201 ↗
45. Han Y, Weng Z, Cao L, Li L, Liang K, Lian Z, Wang Z (2019) Fabrication of oil-water separation stainless steel mesh via direct laser interference lithography, candle soot deposition, and thermal treatment. J Laser Appl 31:012003. https://doi.org/10.2351/1.501620610.2351/1.5016206 ↗
46. Shah A, Parashar A, Mann JS, Sivakumar N (2009) Interference assisted laser induced forward transfer for structured patterning. Open Applied Physics Journal 2:49–52. https://doi.org/10.2174/187418350090201004910.2174/1874183500902010049 ↗
47. Zhao Q, Qiu J, Zhao C, Jiang X, Zhu C (2005) Optical transfer of periodic microstructures by interfering femtosecond laser beams. Opt Express 13:3104–3109. https://doi.org/10.1364/OPEX.13.00310410.1364/OPEX.13.003104 ↗
48. Nakata Y, Hayashi E, Tsubakimoto K, Miyanaga N, Narazaki A, Shoji T, Tsuboi Y (2020) Nanodot array deposition via single shot laser interference pattern using laser-induced forward transfer. Int. J. Extrem. Manuf. 2:025101. CNKI:SUN:IJEG.0.2020–02–007.10.1088/2631-7990/ab88bf ↗
49. Nakata Y, Tsubakimoto K, Miyanaga N, Narazaki A, Tsuboi Y (2021) Laser-induced transfer of noble metal nanodots with femtosecond laser-interference processing. Nanomaterials 11:1–10. https://doi.org/10.3390/nano1102030510.3390/nano11020305 ↗
50. Abdellatif MH, Abdelrasoul GN, Scarpellini A, Marras S, Diaspro A (2015) Induced growth of dendrite gold nanostructure by controlling self-assembly aggregation dynamics. J Colloid Interf Sci 458:266–272. https://doi.org/10.1016/j.jcis.2015.07.05510.1016/j.jcis.2015.07.055 ↗
51. Abdellatif MH, Keshavan S, Dante S, Salerno M (2017) Induced inhomogeneity in graphene work function due to graphene - TiO2/Ag/glass substrate interaction. Thin Solid Films 628:43–49. https://doi.org/10.1016/j.tsf.2017.03.01110.1016/j.tsf.2017.03.011 ↗
52. Abdellatif MH, Salerno M, Polovitsyn A, Marras S, Angelis FD (2017) Sensing the facet orientation in silver nano-plates using scanning Kelvin probe microscopy in air. Appl Surf Sci 403:371–377. https://doi.org/10.1016/j.apsusc.2017.01.17510.1016/j.apsusc.2017.01.175 ↗
53. Kostovski G, White DJ, Mitchell A, Austin MW, Stoddart PR (2009) Nanoimprinted optical fibres: biotemplated nanostructures for SERS sensing. Biosens Bioelectron 24:1531–1535. https://doi.org/10.1016/j.bios.2008.10.01610.1016/j.bios.2008.10.016 ↗
54. Verma AK, Das R, Soni RK (2018) Laser fabrication of periodic arrays of microsquares on silicon for SERS application. Appl Surf Sci 427:133–140. https://doi.org/10.1016/j.apsusc.2017.08.14310.1016/j.apsusc.2017.08.143 ↗
55. Shen H, Wang Y, Cao L, Xie Y, Wang L, Chu X, Shi K, Wang S, Yu M, Liu R, Zhang J, Li C, Weng Z, Wang Z (2022) Fabrication of periodic microscale stripes of silver by laser interference induced forward transfer and their SERS properties. Nanotechnology 33:115302. https://doi.org/10.1088/1361-6528/ac3e3410.1088/1361-6528/ac3e34 ↗
56. Wang DP, Wang ZB, Zhang ZA, Yue Y, Li DY, Maple C (2013) Effects of polarization on four-beam laser interference lithography. Appl Phys Lett 102:081903. https://doi.org/10.1063/1.479375210.1063/1.4793752 ↗
57. Shen H, Wang Y, Cao L, Xie Y, Wang Y, Zhang Q, Zhang W, Wang S, Han Z, Zhu X, Yu M, Liu R, Gao M, Li C, Weng Z, Wang Z (2021) Fabrication of periodical micro-stripe structure of polyimide by laser interference induced forward transfer technique. Appl Surf Sci 541:148466. https://doi.org/10.1016/j.apsusc.2020.14846610.1016/j.apsusc.2020.148466 ↗
58. Jiang X, Weng Z, Cao L, Zhang Q, Liu R, Li L, Wang Z (2019) Fabrication of silicon nanostripe structures by laser-interference-induced backward transfer technique. Appl Surf Sci 489:983–988. https://doi.org/10.1016/j.apsusc.2019.05.32210.1016/j.apsusc.2019.05.322 ↗
59. Wang L, Dong L, Li L, Weng Z, Xu H, Yu M, Wang Z (2018) Fabrication of periodically micropatterned magnetite nanoparticles by laser-interference-controlled electrode position. J Mater Sci 53:3239–3249. https://doi.org/10.1007/s10853-017-1788-910.1007/s10853-017-1788-9 ↗
60. Liu Q, Li W, Cao L, Wang J, Qu Y, Wang X, Liang B (2017) Response of MG63 osteoblast cells to surface modification of Ti-6Al-4V implant alloy by laser interference lithography. J Bionic Eng 14:448–458. https://doi.org/10.1016/S1672-6529(16)60410-910.1016/S1672-6529(16)60410-9 ↗
61. Brown MS, Kattamis NT, Arnold CB (2011) Time-resolved dynamics of laser-induced micro-jets from thin liquid films. Microfluid Nanofluid 11:199–207. https://doi.org/10.1007/s10404-011-0787-410.1007/s10404-011-0787-4 ↗
62. Kattamis NT, Brown MS, Arnold CB (2011) Finite element analysis of blister formation in laser-induced forward transfer. J Mater Res 26:2438–2449. https://doi.org/10.1557/jmr.2011.21510.1557/jmr.2011.215 ↗
63. Brown MS, Brasz CF, Ventikos Y, Arnold CB (2012) Impulsively actuated jets from thin liquid films for high-resolution printing applications. J Fluid Mech 709:341–370. https://doi.org/10.1017/jfm.2012.33710.1017/jfm.2012.337 ↗
64. Sun CH, Wang ML, Feng Q, Liu W, Xu CX (2015) Surface-enhanced Raman scattering (SERS) study on rhodamine B adsorbed on different substrates. Russ J Phys Chem A 89:291–296. https://doi.org/10.1134/S003602441502033810.1134/S0036024415020338 ↗
65. Borrero NFV, Filho JMCS, Eramkov VA, Marques FC (2019) Silver nanoparticles produced by laser ablation for a study on the effect of SERS with low laser power on N719 dye and Rhodamine-B. MRS Advances 4:1–9. https://doi.org/10.1557/adv.2019.15710.1557/adv.2019.157 ↗
66. Liu HM, Zhang XP, Zhai TR, Sander T, Klar PJ (2014) Centimeter-scale-homogeneous SERS substrates with seven-order global enhancement through thermally controlled plasmonic nanostructures. Nanoscale 6:5099–5105. https://doi.org/10.1039/c4nr00161c10.1039/c4nr00161c ↗
67. Emory SR, Haskins WE, Nie S (1998) Direct observation of size-dependent optical enhancement in single metal nanoparticles. J Am Chem Soc 120:8009–8010. https://doi.org/10.1021/ja981567710.1021/ja9815677 ↗
68. Krug JT, Wang GD, Emory SR, Nie S (1999) Efficient Raman enhancement and intermittent light emission observed in single gold nanocrystals. J Am Chem Soc 121:9208–9214. https://doi.org/10.1021/ja992058n10.1021/ja992058n ↗