journal article·2016-12

A comparative study on the performance of hybrid solar cells containing ZnSTe QDs in hole transporting layer and photoactive layer

Mansoor Ani Najeeb, Shahino Mah Abdullah, Fakhra Aziz, Zubair Ahmad, R. A. Shakoor, A. M. A. Mohamed, Uzma Khalil, Wageh Swelm, Ahmed A. Al-Ghamdi, Khaulah Sulaiman

Journal of Nanoparticle Research· Volume 18· Issue 12
Publisher page

Abstract

In this paper, ZnSTe quantum dots-based hybrid solar cells (HSC) with two different device architectures have been investigated. The improved performance of the poly(3-hexylthiophene) (P3HT) and [6,6]phenyl C71 butyric acid methyl ester (PC71BM)-based bulk heterojunction (BHJ) solar cells by the incorporation of ZnSTe quantum dots (QDs) with an average size of 2.96 nm in PEDOT:PSS layer and active layer that have been demonstrated. Although the efficiency of both types of devices is almost the same, a close comparison reveals different reasons behind their improved performance. The device prepared with QDs in the HTL has shown reduced series resistance, increased shunt resistance, and improved mobility. On the other hand, QDs in the photoactive layer demonstrates increased photo-generation leading to improved efficiency.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Organic Electronics and Photovoltaics · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Adachi S (2009) Properties of semiconductor alloys: group-IV, III-V and II-VI semiconductors, vol 28. John Wiley & Sons10.1002/9780470744383 ↗
2. Braga A, Giménez S, Concina I, Vomiero A, Mora-Seró I (2011) Panchromatic sensitized solar cells based on metal sulfide quantum dots grown directly on nanostructured TiO2 electrodes. The Journal of Physical Chemistry Letters 2(5):454–46010.1021/jz2000112 ↗
3. Carey GH, Abdelhady AL, Ning Z, Thon SM, Bakr OM, Sargent EH (2015) Colloidal quantum dot solar cells. Chem Rev 115(23):12732–1276310.1021/acs.chemrev.5b00063 ↗
4. Chang JA, Im SH, Lee YH et al (2012) Panchromatic photon-harvesting by hole-conducting materials in inorganic–organic heterojunction sensitized-solar cell through the formation of nanostructured electron channels. Nano Lett 12(4):1863–186710.1021/nl204224v ↗
5. Chen L-M, Xu Z, Hong Z, Yang Y (2010) Interface investigation and engineering–achieving high performance polymer photovoltaic devices. J Mater Chem 20(13):2575–259810.1039/b925382c ↗
6. Chiguvare Z, Parisi J, Dyakonov V (2003) Current limiting mechanisms in indium-tin-oxide/poly3-hexylthiophene/aluminum thin film devices. J Appl Phys 94:2440–244810.1063/1.1588358 ↗
7. Fan C, Zhang Q, Zhu X, Zhuang X, Pan A (2015) Photoluminescence and surface photovoltage properties of ZnSe nanoribbons. Science Bulletin 60(19):1674–167910.1007/s11434-015-0900-2 ↗
8. Farag A, Yahia I, Wojtowicz T, Karczewski G (2010) Influence of temperature and illumination on the electrical properties of p-ZnTe/n-CdTe heterojunction grown by molecular beam epitaxy. J Phys D Appl Phys 43:21510210.1088/0022-3727/43/21/215102 ↗
9. González-Pedro V, Xu X, Mora-Sero I, Bisquert J (2010) Modeling high-efficiency quantum dot sensitized solar cells. ACS Nano 4(10):5783–579010.1021/nn101534y ↗
10. Guinier A (1963) X-ray diffraction. W. H. Freeman, San Francisco, CA, USA
11. Janotti A, Van de Walle CG (2009) Fundamentals of zinc oxide as a semiconductor. Rep Prog Phys 72(12):12650110.1088/0034-4885/72/12/126501 ↗
12. Khrebtov A, Talalaev V, Werner P et al (2013) Composite system based on CdSe/ZnS quantum dots and GaAs nanowires. Semiconductors 47(10):1346–135010.1134/S106378261310014X ↗
13. Mora-Sero I, Gimenez S, Fabregat-Santiago F et al (2009) Recombination in quantum dot sensitized solar cells. Acc Chem Res 42(11):1848–185710.1021/ar900134d ↗
14. Najeeb MA, Abdullah SM, Aziz F et al (2016a) Structural, morphological and optical properties of PEDOT: PSS/QDs nano-composite films prepared by spin-casting. Physica E: Low-dimensional Systems and Nanostructures 83:64–6810.1016/j.physe.2016.04.014 ↗
15. Najeeb MA, Abdullah SM, Aziz F et al (2016b) Improvement in the photovoltaic properties of hybrid solar cells by incorporating a QD-composite in the hole transport layer. RSC Adv 6(27):23048–2305710.1039/C6RA01052K ↗
16. Ocak YS, Kulakci M, Kılıçoğlu T, Turan R, Akkılıç K (2009) Current–voltage and capacitance–voltage characteristics of a Sn/Methylene Blue/p-Si Schottky diode. Synth Met 159:1603–160710.1016/j.synthmet.2009.04.024 ↗
17. Roy M, Balraju P, Deol Y, Mishra R, Choudhary V, Sharma G (2008) Charge transportation and photo generation process in polythiophene functionalized with tin (II) phthalocyanine (SnPc-PT) thin film. Sol Energy Mater Sol Cells 92:1516–152510.1016/j.solmat.2008.06.017 ↗
18. Schweizer TM (2005) Electrical characterization and investigation of the piezoresistive effect of PEDOT: PSS thin films
19. Sonawane KG, Rajesh C, Temgire M, Mahamuni S (2011) A case study: Te in ZnSe and Mn-doped ZnSe quantum dots. Nanotechnology 22(30):30570210.1088/0957-4484/22/30/305702 ↗
20. Sou IK, Man CL, Ma ZH, Yang Z, Wong GKL (1997) High performance ZnSTe photovoltaic visible-blind ultraviolet detectors. Appl Phys Lett 71(26):3847–384910.1063/1.120522 ↗
21. Sou IK, Man CL, Ma ZH, Yang Z, Wong GKL (1998) ZnSTe-based visible-blind UV photovoltaic detectors. J Cryst Growth 184:1324–132910.1016/S0022-0248(98)80273-X ↗
22. Sou IK, Wong KS, Yang ZY, Wang H, Wong GKL (1995) Highly efficient light emission from ZnS1−xTex alloys. Appl Phys Lett 66(15):1915–191710.1063/1.113275 ↗
23. Sou IK, Yang Z, Mao J et al (1996) Aluminum-doped n-type ZnSTe alloy grown by molecular beam epitaxy. Appl Phys Lett 69(17):2519–252110.1063/1.117718 ↗
24. Thompson BC, Frechet JM (2008) Polymer–fullerene composite solar cells. Angew Chem Int Ed 47(1):58–7710.1002/anie.200702506 ↗
25. Toyoda T, Shen Q (2012) Quantum-dot-sensitized solar cells: effect of nanostructured TiO2 morphologies on photovoltaic properties. The Journal of Physical Chemistry Letters 3(14):1885–189310.1021/jz3004602 ↗
26. Wageh S (2016) Ternary ZnS: Te nanoparticles capped with 3-mercaptopropionic acid prepared in aqueous media. J Mater Sci Mater Electron 27(10):10877–1088710.1007/s10854-016-5197-7 ↗
27. Wang H, Wong KS, Sou IK, Wong GKL (1995) Room-temperature deep-blue stimulated emission in ZnS/ZnSe and ZnSTe/ZnSe strained layer superlattices. Appl Phys Lett 66(23):3140–314210.1063/1.113629 ↗
28. Wang L-D, Zhang T, Zhu S-Q et al (2012) Two-dimensional ultrathin gold film composed of steadily linked dense nanoparticle with surface plasmon resonance. Nanoscale Res Lett 7(1):110.1186/1556-276X-7-1 ↗
29. Wright M, Uddin A (2012) Organic—inorganic hybrid solar cells: a comparative review. Sol Energy Mater Sol Cells 107:87–11110.1016/j.solmat.2012.07.006 ↗
30. Yu Y-M, Nam S, Rhee J-K, Byungsung O, Lee K-S, Choi Y (2000) Characterization and growth of ZnSTe epilayers by hot-wall epitaxy. J Cryst Growth 210(4):521–52610.1016/S0022-0248(99)00738-1 ↗
31. Zhao D, Li J-T, Gao F, C-l Z, He Z-k (2014) Facile synthesis and characterization of highly luminescent UV-blue-emitting ZnSe/ZnS quantum dots via a one-step hydrothermal method. RSC Adv 4(87):47005–4701110.1039/C4RA06077F ↗
32. Zhao Z, Wu Q, Xia F et al (2015) Improving the conductivity of PEDOT: PSS hole transport layer in polymer solar cells via copper (II) bromide salt doping. ACS Appl Mater Interfaces 7(3):1439–144810.1021/am505387q ↗