journal article·2013-11

Sacrificed template synthesis of Li1.2Ni0.13Co0.13Mn0.54O2 spheres for lithium-ion battery cathodes

Chenhao Zhao, Rui Liu, Xinru Liu, Xinxin Wang, Fan Feng, Qiang Shen

Journal of Nanoparticle Research· Volume 15· Issue 11
Publisher page

Abstract

Porous and solid Li1.2Ni0.13Co0.13Mn0.54O2 spheres have been prepared by spherical Ni0.13Co0.13Mn0.54(CO3)0.8 and MnO2-sacrificed templates route. X-ray diffraction profiles show two kinds of Li1.2Ni0.13Co0.13Mn0.54O2 spheres have good layered structure with solid solution characteristic. Scanning electron microscope images reveal that the porous Li1.2Ni0.13Co0.13Mn0.54O2 spheres obtained from spherical carbonate precursor are composed of well-defined primary nanoparticles. These nanoparticles have the size of 100–300 nm, and some porous structure can be observed among these particles on the surface. The solid spheres obtained from MnO2 are made of tightly clustered nanoparticles. As lithium-ion battery cathodes, the porous spheres exhibit a high initial discharge capacity of 255.7 mAh g−1 at 0.1 C between 2.0 and 4.8 V. After 50 cycles, a discharge capacity of 177.7 mAh g−1 could be retained at 0.5 C. Even at high charge–discharge rate of 5 C (1,000 mA g−1), 121.4 mAh g−1 can be reached. But the solid spheres only deliver initial discharge capacity of 159.9 mAh g−1 at 0.1 C. Anyway, the different electrochemical performances of two samples should be attributed to the use of different sacrificed templates.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Cheng FQ, Xin YL, Chen JT, Lu L, Zhang XX, Zhou HH (2013) Monodisperse Li1.2Mn0.6Ni0.2O2 spheres with enhanced lithium storage capability. J Mater Chem A 1:5301–530810.1039/c3ta00153a ↗
2. Deng YF, Li ZN, Shi ZC, Xu H, Peng F, Chen GH (2012) Porous Mn2O3 microsphere as a superior anode material for lithium ion batteries. RSC Adv 2:4645–464710.1039/c2ra20062g ↗
3. Deng YH, Liu SQ, Liang XX (2013) Study of carbon surface-modified Li[Li0.2Ni0.13Co0.13Mn0.54]O2 for high-capacity lithium-ion battery cathode. J Solid State Electrochem 17:1067–107510.1007/s10008-012-1970-6 ↗
4. Ellis BL, Lee KT, Nazar LF (2010) Positive electrode materials for Li-ion and Li-batteries. Chem Mater 22:691–71410.1021/cm902696j ↗
5. Goodenough JB, Kim YS (2010) Challenge for rechargeable Li batteries. Chem Mater 22:587–60310.1021/cm901452z ↗
6. Guo XJ, Li YX, Zheng M, Zheng JM, Li J, Yang Y (2008) Structural and electrochemical characterization of xLi[Li1/3Mn2/3]O2·(1 − x)Li[Ni1/3Co1/3Mn1/3]O2 (0 ≤ x ≤ 0.9) as cathode materials for lithium-ion batteries. J Power Sources 184:414–41910.1016/j.jpowsour.2008.04.013 ↗
7. He P, Yu HJ, Li D, Zhou HS (2012) Layered lithium transition metal oxide cathodes towards high energy lithium-ion batteries. J Mater Chem 22:3680–369510.1039/c2jm14305d ↗
8. Jiang KC, Wu XL, Yin YX, Lee JS, Kim JK, Guo YG (2012) Superior hybrid cathode material containing lithium-excess layered material and graphene for lithium-ion batteries. ACS Appl Mater Interfaces 4:4858–486410.1021/am301202a ↗
9. Jiang Y, Yang Z, Luo W, Hu XL, Huang YH (2013) Hollow 0.3Li2MnO3·0.7LiNi0.5Mn0.5O2 spheres as a high-performance cathode material for lithium-ion batteries. Phys Chem Chem Phys 15:2954–296010.1039/c2cp44394e ↗
10. Johnson CS, Li NC, Lefief C, Vaughey JT, Thackeray MM (2008) Synthesis, characterization, and electrochemistry of lithium battery electrodes: xLi2MnO3 (1 − x)LiNi0.333Co0.333Mn0.333O2 (0 ≤ x ≤ 0.7). Chem Mater 20:6095–610610.1021/cm801245r ↗
11. Kim DH, Kang SH, Balasubramanian M, Johnson CS (2010) High-energy and high-power Li-rich nickel manganese oxide electrode materials. Electrochem Commun 12:1618–162110.1016/j.elecom.2010.09.009 ↗
12. Kim HJ, Jung HG, Scrosati B, Sun YK (2012a) Synthesis of Li[Li0.19Ni0.16Co0.08Mn0.57]O2 cathode materials with a high volumetric capacity for Li-ion batteries. J Power Sources 203:115–12010.1016/j.jpowsour.2011.11.076 ↗
13. Kim S, Kim CJ, Noh JK, Yu SH, Kim SJ, Chang WY, Choi WC, Chung KY, Cho BW (2012b) Synthesis of layered–layered xLi2MnO3·(1 − x)LiMO2 (M = Mn, Ni, Co) nanocomposite electrodes materials by mechanochemical process. J Power Sources 220:422–42910.1016/j.jpowsour.2012.07.135 ↗
14. Li JF, Xiong SL, Li XW, Qian YT (2012) Spinel Mn1.5Co1.5O4 core-shell spheres as Li-ion battery anode materials with a long cycle life and high capacity. J Mater Chem 22:23254–2325910.1039/c2jm35607d ↗
15. Lim JH, Bang H, Lee KS, Amine K, Sun YK (2009) Electrochemical characterization of Li2MnO3–LiNi1/3Co1/3Mn1/3O2–LiNiO2 cathodes synthesized via co-precipitation for lithium secondary batteries. J Power Sources 189:571–57510.1016/j.jpowsour.2008.10.035 ↗
16. Liu HW, Yang HM, Li JL (2010a) A novel method for preparing LiFePO4 nanorods as a cathode material for lithium-ion power batteries. Electrochim Acta 55:1626–162910.1016/j.electacta.2009.10.039 ↗
17. Liu J, Wang QY, Reeja-Jayan B, Manthiram A (2010b) Carbon-coated high capacity layered Li[Li0.2Ni0.13Co0.13Mn0.54]O2 cathodes. Electrochem Commun 12:750–75310.1016/j.elecom.2010.03.024 ↗
18. Liu YM, Chen BL, Cao F, Zhao XZ, Yuan JK (2011) Synthesis of nanoarchitectured LiNi0.5Mn0.5O2 spheres for high-performance rechargeable lithium-ion batteries via a in situ conversion route. J Mater Chem 21:10437–1044110.1039/c1jm10408j ↗
19. Liu JL, Chen L, Hou MY, Wang F, Che RC, Xia YY (2012) General synthesis of xLi2MnO3·(1 − x)LiNi1/3Co1/3Mn1/3O2 nanomaterials by a molten-salt method: towards a high capacity and high power cathode for rechargeable lithium batteries. J Mater Chem 22:25380–2538710.1039/c2jm35026b ↗
20. Santhanam R, Jones P, Sumana A, Rambabu B (2010) Influence of lithium content on high rate cycleability of layered Li1+x Ni0.30Co0.30Mn0.40O2 cathodes for high power lithium-ion batteries. J Power Sources 195:7391–739610.1016/j.jpowsour.2010.06.004 ↗
21. Thackeray MM, Johnson CS, Vaughey JT, Li N, Hackney SA (2005) Advances in manganese-oxide ‘composite’ electrodes for lithium-ion batteries. J Mater Chem 15:2257–226710.1039/b417616m ↗
22. Thackeray MM, Kang SH, Johnson CS, Vaughey JT, Benedek R, Hackney SA (2007) Li2MnO3-stabilized LiMO2 electrodes for lithium-ion batteries. J Mater Chem 17:3112–312510.1039/b702425h ↗
23. Wang J, Yao XY, Zhou XF, Liu ZP (2011) Synthesis and electrochemical properties of layered lithium transition metal oxides. J Mater Chem 21:2544–254910.1039/C0JM03388J ↗
24. Wen JW, Zhang DW, Teng YC, Chen CH, Xiong Y (2010) One-step synthesis and improved electrochemical performance of Li(Ni1/3Co1/3Mn1/3)O2 by a modified radiated polymer gel method. Eletrochim Acta 55:2306–231010.1016/j.electacta.2009.11.084 ↗
25. Xiao XL, Lu J, Li YD (2010) LiMn2O4 spheres: synthesis, characterization and use as a cathode in lithium-ion batteries. Nano Res 3:733–73710.1007/s12274-010-0037-1 ↗
26. Zhao CH, Kang WP, Xue QB, Shen Q (2012) Polymerization-pyrolysis-assisted nanofabrication of solid solution Li1.2Ni0.13Co0.13Mn0.54O2 for lithium-ion battery cathodes. J Nanopart Res 14:124010.1007/s11051-012-1240-7 ↗
27. Zhao CH, Kang WP, Liu R, Shen Q (2013a) Influence of cobalt on the electrochemical properties of sheet-like 0.5Li2MnO3·0.5LiNi1/3+x Co1/3−2x Mn1/3+x O2 as lithium-ion battery cathodes. RSC Adv 2:2362–236810.1039/c2ra22690a ↗
28. Zhao TL, Chen S, Li L, Zhang XF, Chen RJ, Belharouak I, Wu F, Amine K (2013b) Synthesis, characterization, and electrochemistry of cathode material Li[Li0.2Ni0.13Co0.13Mn0.54]O2 using organic chelating agents for lithium-ion batteries. J Power Source 208:206–21310.1016/j.jpowsour.2012.11.099 ↗
29. Zheng JM, Wu XB, Yang Y (2011) A comparison of preparation method on the electrochemical performance of cathode material Li[Li0.2Ni0.13Co0.13Mn0.54]O2 for lithium-ion battery. Electrochim Acta 56:3071–307810.1016/j.electacta.2010.12.049 ↗
30. Zhong ZH, Ye NQ, Wang H, Ma Z (2011) Low-temperature combustion synthesis and performance of spherical 0.5Li2MnO3–0.5LiNi0.5Mn0.5O2 cathode material for Li-ion batteries. Chem Eng J 175:579–58410.1016/j.cej.2011.09.112 ↗
31. Zhou L, Zhao DY, Lou XW (2012) LiNi0.5Mn1.5O4 hollow structure as high-performance cathodes for lithium-ion batteries. Angew Chem Int Ed 51:239–24110.1002/anie.201106998 ↗