Fracture mode and compressive strength of ice-templated porous zirconia
Source abstract
Abstract
Abstract Porous zirconia with different porosity and pore architecture were prepared by adjusting the solid loading and the binder concentration of the suspensions, and freezing rate via an ice-templating method. The transition of the fracture mode and the relationship between the compressive strength and process parameters were identified and investigated. The load-displacement curves showed a variation from a buckling fracture at porosity above 70 % to a brittle fracture in the porosity range from 35.3 % to 55.5 %, owning to the increased resistance of the ceramic walls to buckling. As the porosity decreased from 75.0 % to 35.3 %, the mean compressive strength of the samples increased from 4.5 MPa to 197.1 MPa. Under buckling fracture, increasing the binder concentration from 2 wt% to 4 wt% contributed to the improvement of the mean compressive strength from 5.5 MPa to 14.8 MPa, although samples had similar porosity level (~73 %). For brittle fracture, samples with porosity around 54 % exhibited the improvement of mean compressive strength from 45.5 MPa to 75.1 MPa when increasing the freeze velocity from 8 °C/min to 25 °C/min.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Concrete and Cement Materials Research · Cellular and Composite Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Freeze casting - a review of processing, microstructure and properties via the open data repository10.1016/j.pmatsci.2018.01.001 ↗
2. The lure of ice-templating: recent trends and opportunities for porous materials10.1016/j.scriptamat.2017.06.020 ↗
3. Shape memory zirconia foams through ice templating10.1016/j.scriptamat.2017.03.032 ↗
4. Effects of rheological properties on ice-templated porous hydroxyapatite ceramics10.1016/j.msec.2012.08.048 ↗
5. Freeze casting of hydroxyapatite scaffolds for bone tissue engineering10.1016/j.biomaterials.2006.06.028 ↗
6. Enhanced pyroelectric and piezoelectric properties of PZT with aligned porosity for energy harvesting applications10.1039/C7TA00967D ↗
7. Regenerative performance of the NASA symmetrical solid oxide fuel cell design10.1111/j.1744-7402.2009.02477.x ↗
8. Controlling porosity of anode support in tubular solid oxide fuel cells by freeze casting10.1115/1.4046489 ↗
9. The effect of polyvinyl alcohol on the microstructure and permeability of freeze-cast alumina10.1111/j.1551-2916.2009.03398.x ↗
10. Mechanical properties and failure behavior of unidirectional porous ceramics10.1038/srep24326 ↗
11. The out-of-plane properties of honeycombs10.1016/0020-7403(92)90013-7 ↗
12. Structure-property-processing correlations in freeze-cast composite scaffolds10.1016/j.actbio.2013.01.012 ↗
13. Architectural control of freeze-cast ceramics through additives and templating10.1111/j.1551-2916.2009.03087.x ↗
14. Bioinspired scaffolds with varying pore architectures and mechanical properties10.1002/adfm.201302958 ↗
15. The effect of wall thickness distribution on mechanical reliability and strength in unidirectional porous ceramics10.1080/14686996.2016.1140309 ↗
16. The failure of brittle porous solids under compressive stress states10.1016/0001-6160(86)90087-8 ↗
17. Mechanical properties of porous ceramics in compression: on the transition between elastic, brittle, and cellular behavior10.1016/j.jeurceramsoc.2012.05.006 ↗
18. Deville · 2017 · 473
19. Control of lamellae spacing during freeze casting of ceramics using double-side cooling as a novel processing route10.1111/j.1551-2916.2008.02673.x ↗
20. Porous SiC ceramics with dendritic pore structures by freeze casting from chemical cross-linked polycarbosilane10.1016/j.ceramint.2018.01.019 ↗
21. Ultralight porous SiC with attracting strength: freeze casting of polycarbosilane/SiCp/camphene-based suspensions10.1016/j.ceramint.2019.12.223 ↗
22. Influence of surface tension, osmotic pressure and pores morphology on the densification of ice-templated ceramics10.1016/j.jeurceramsoc.2010.12.021 ↗
23. Particle redistribution and structural defect development during ice templating10.1016/j.actamat.2012.02.023 ↗
24. The failure of brittle solids small cracks under compressive containing stress states10.1016/0001-6160(86)90086-6 ↗
25. Hongwen · 2004 · 290
26. Yin · 2004 · 48
27. Jiang hong · 2001 · 10
28. Gibson · 1997 · 157