journal article·2015-07

Dielectric response of Mg0.95Ca0.05TiO3 ceramic filled HDPE composites with low dielectric loss

Yunzhou Shi, Li Zhang, Zhenxing Yue

Publisher page

Abstract

Abstract The Mg 0.95 Ca 0.05 TiO 3 (MCT) 1 ceramic filled high density polyethylene (HDPE) 2 composites for microwave applications have been investigated in this paper. Composites with different volume fraction ( Vf ) 3 of ceramic fillers from 0.10 to 0.50 were prepared by twin-screw extrusion and hot pressing techniques. A descending trend of the diffraction peaks of crystalline HDPE is observed in X-ray diffraction patterns, corresponding to the ratio of ceramic filler and polymer substrate. Scanning electron microscopic photos illustrate compact samples with satisfactory uniformity. The relative permittivity ( e r ) at microwave frequencies is found to increase with filler volume fraction. e r of the 0.50 V f composite reaches 7.32 under its resonant frequency (8.42 GHz) while its loss tangent keeps less than 0.001. The relative permittivity of this series of composites also exhibit good frequency stability and temperature stability within the range of 10 MHz–1 GHz and −40 °C~100 °C, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Dielectric materials and actuators · Electromagnetic wave absorption materials · Microwave Dielectric Ceramics Synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Pecht · 1998
2. Dielectric response of high permittivity polymer ceramic composite with low loss tangent10.1063/1.3200244 ↗
3. Microwave characteristics of (Zr, Sn) TiO4 and BaO–PbO–Nd2O3–TiO2 dielectric resonators10.1111/j.1151-2916.1984.tb18847.x ↗
4. A new compound with ultra low dielectric loss at microwave frequencies10.1111/j.1551-2916.2009.03046.x ↗
5. Microwave dielectric ceramics for resonators and filters in mobile phone networks10.1111/j.1551-2916.2006.01025.x ↗
6. Polymer–ceramic composites of 0-3 connectivity for circuits in electronics: a review10.1111/j.1744-7402.2009.02482.x ↗
7. Ceramic–polymer composites with high dielectric constant10.1002/adma.200601996 ↗
8. High-dielectric-constant ceramic–powder polymer composites10.1063/1.126787 ↗
9. Preparation and characterization of high permittivity and low loss PTFE/CaTiO3 microwave laminates10.1002/pc.20716 ↗
10. Dielectric constant for binary piezoelectric 0-3 composites10.1063/1.354057 ↗
11. The chemical and dielectric properties of epoxy/(Ba0.8Sr0.2)(Ti0.9Zr0.1) O3 composites for embedded capacitor application10.1016/j.eurpolymj.2009.02.005 ↗
12. Study on epoxy/BaTiO3 composite embedded capacitor films (ECFs) for organic substrate applications10.1016/j.mseb.2004.01.022 ↗
13. Dielectric, mechanical, and thermal properties of low-permittivity polymer–ceramic composites for microelectronic applications10.1111/j.1744-7402.2010.02510.x ↗
14. Polystyrene/Sr2Ce2Ti5O15 composites with low dielectric loss for microwave substrate applications10.1002/pen.21220 ↗
15. Ba (Mg1/3Ta2/3)O3 filled PTFE composites for microwave substrate applications10.1016/j.matchemphys.2010.03.035 ↗
16. Low dielectric loss polytetrafluoroethylene/TeO2 polymer ceramic composites10.1111/j.1551-2916.2007.01914.x ↗
17. Electrical properties of ceramic/polymer composites10.1109/14.55739 ↗
18. Electrical and thermal properties of low permittivity Sr2Al2SiO7 ceramic filled HDPE composites10.1016/j.ceramint.2012.11.090 ↗
19. Reconfigurable sensing antenna with novel HDPE-BST material for temperature sensation10.1109/LAWP.2013.2286631 ↗
20. Dielectric, thermal, and mechanical properties of CeO2 filled HDPE composites for microwave substrate applications10.1002/polb.21988 ↗
21. HDPE matrix composites filled with Ca4La6 (SiO4)4 (PO4)2O2 for microwave substrate applications10.1115/1.4027089 ↗
22. Ba (Zn1/3Ta2/3)O3 ceramics reinforced high density polyethylene for microwave applications
23. Mechanical model to evaluate the effect of the dispersion in nanocomposites10.1016/j.actamat.2007.01.007 ↗
24. Structure–property relationships of irradiation grafted nano-inorganic particle filled polypropylene composites10.1016/S0032-3861(00)00325-6 ↗
25. Lichtenecker׳s equation: applicability and limitations10.1016/S0030-4018(99)00695-1 ↗
26. Equation for the effective permittivity of particle-filled composites for material design applications10.1088/0022-3727/40/16/032 ↗
27. A precise numerical prediction of effective dielectric constant for polymer–ceramic composite based on effective-medium theory10.1109/6144.888853 ↗