Ultrahigh energy storage performance in gradient textured composites of plate-like Na0.5Bi4.5Ti4O15/PVDF through interface engineering
Source abstract
Abstract
Abstract The gradient textured plate-like Na0.5Bi4.5Ti4O15 (P-NBT4)/PVDF composites have been realized through tape casting process of layer by layer, which loadings are gradually decreased from bottom layer to top layer. The micro-capacitance formed by P-NBT4 particles and interfacial polarization between layers enables the composites to obtain a high permittivity. In addition, the different electric field of gradient composites will weaken the growth of electric tree between layers, as well as the P-NBT4 ceramic particles in composite films can extend the breakdown path, so that the composites will undergo premature breakdown. By comparing, the large energy storage density (16.41 J/cm3) at the relative low electric field of 350 kV/mm is obtained in the gradient textured composites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dielectric materials and actuators · Ferroelectric and Piezoelectric Materials · Electromagnetic wave absorption materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Enhanced energy storage performance in bismuth layer-structured BaBi2Me2O9 (Me = Nb and Ta) relaxor ferroelectric ceramics10.1016/j.ceramint.2020.03.139 ↗
2. Flash sintering of barium titanate10.1016/j.ceramint.2018.12.211 ↗
3. Enhanced energy density and discharged efficiency of lead-free relaxor (1-x)[(Bi0.5Na0.5)0.94Ba0.06]0.98La0.02TiO3-xKNb0.6Ta0.4O3 ceramic capacitors10.1016/j.cej.2020.124879 ↗
4. Greatly enhanced discharge energy density and efficiency of novel relaxation ferroelectric BNT–BKT-based ceramics10.1039/C9TC05528B ↗
5. Bi0.5Na0.5TiO3-based relaxor ferroelectric ceramic with large energy density and high efficiency under a moderate electric field10.1039/C9TC03597D ↗
6. Tailoring high energy density with superior stability under low electric field in novel (Bi0.5Na0.5)TiO3-based relaxor ferroelectric ceramics10.1016/j.jeurceramsoc.2020.05.078 ↗
7. Progress, outlook, and challenges in lead-free energy-storage ferroelectrics
8. Ultrafast discharge and high-energy-density of polymer nanocomposites achieved via optimizing the structure design of barium titanates10.1021/acssuschemeng.7b00080 ↗
9. Ultrahigh energy storage performance of lead-free oxide multilayer film capacitors via interface engineering10.1002/adma.201604427 ↗
10. 2D MoSe2-Ni(OH)2 nanohybrid as an efficient electrode material with high rate capability for asymmetric supercapacitor applications10.1016/j.cej.2018.08.185 ↗
11. Synthesis of high aspect ratio BaTiO3 nanowires for high energy density nanocomposite capacitors
12. Enhanced energy density of flexible asymmetric solid state supercapacitor device fabricated with amorphous thin film electrode materials10.1016/j.jpcs.2020.109425 ↗
13. Achieving high energy density and low loss in PVDF/BST nanodielectrics with enhanced structural homogeneity10.1021/acsami.8b10354 ↗
14. Ultrafast discharge and enhanced energy density of polymer nanocomposites loaded with 0.5(Ba0.7Ca0.3)TiO3-0.5Ba(Zr0.2Ti0.8)O3 one-dimensional nanofibers10.1021/acsami.7b01381 ↗
15. Significantly enhanced energy storage density for poly(vinylidene fluoride) composites by induced PDA-coated 0.5Ba(Zr0.2Ti0.8)O3–0.5(Ba0.7Ca0.3)TiO3 nanofibers10.1039/C7TA03897F ↗
16. Dielectric and ferroelectric properties of bismuth-layer high Curie point Na0.5Bi4.5Ti4O15 ceramics with Mg-doping10.1016/j.ceramint.2017.07.128 ↗
17. Excellent energy storage performance and thermal property of polymer-based composite induced by multifunctional one-dimensional nanofibers oriented in-plane direction10.1016/j.nanoen.2018.11.044 ↗
18. Tunable BT@SiO2 core@shell filler reinforced polymer composite with high breakdown strength and release energy density10.1016/j.compositesa.2016.03.025 ↗
19. Nickel hydroxide as novel filler for high energy density dielectric polymer composites10.1016/j.compscitech.2019.01.010 ↗
20. Poly(vinylidene fluoride)-based nanocomposite employing oriented Bi2S3 nanorods with double-shell structure for high dielectric performance and loss suppression10.1016/j.compscitech.2018.12.020 ↗
21. Achieving high dielectric permittivity, high breakdown strength and high efficiency by cross-linking of poly(vinylidene fluoride)/BaTiO3 nanocomposites10.1016/j.compscitech.2018.10.014 ↗
22. Anisotropic properties and crystal structure of ferroelectric Na0.5Bi4.5Ti4O1510.1016/j.jallcom.2010.07.022 ↗
23. Dielectric and ferroelectric properties of bismuth-layer high Curie point Na0.5Bi4.5Ti4O15 ceramics with Mg-doping10.1016/j.ceramint.2017.07.128 ↗
24. High energy density supercapacitors based on porous mSiO2@Ni3S2/NiS2 promoted with boron nitride and carbon10.1016/j.cej.2020.124561 ↗
25. Sandwich-Structured polymers with electrospun boron nitrides layers as high-temperature energy storage dielectrics10.1016/j.cej.2020.124443 ↗
26. High energy storage density of poly(vinylidene fiuoride) bulk nanocomposites at low electric field induced by giant dielectric constant ceramic nanopowders10.1016/j.ceramint.2018.08.119 ↗
27. Hydrothermal synthesis of BaTiO3 nanowires for high energy density nanocomposite capacitors10.1007/s10853-020-04520-x ↗
28. NaNbO3 two-dimensional platelets induced highly energy storage density in trilayered architecture composites10.1016/j.nanoen.2017.09.004 ↗
29. Superior comprehensive energy storage properties in Bi0.5Na0.5 TiO3-based relaxor ferroelectric ceramics10.1016/j.cej.2020.124158 ↗
30. Enhanced dielectric property and energy storage density of PVDF-HFP based dielectric composites by incorporation of silver nanoparticles-decorated exfoliated montmorillonite nanoplatelets10.1016/j.compositesa.2018.02.020 ↗
31. High dielectric and breakdown properties obtained in a PVDF based nanocomposite with sandwich structure at high temperature via all-2D design10.1039/C9TC01378D ↗
32. Surface modifications of boron nitride nanosheets for poly(vinylidene fluoride) based film capacitors: advantages of edge-hydroxylation10.1039/C9TA00616H ↗
33. High-throughput phase-field design of high-energy-density polymer nanocomposites10.1002/adma.201704380 ↗
34. Polymer nanocomposites with interpenetrating gradient structure exhibiting ultrahigh discharge efficiency and energy density
35. Surface functionalization of BaTiO3 nanoparticles and improved electrical properties of BaTiO3/polyvinylidene fluoride composite10.1039/c1ra00210d ↗
36. Energy storage performance in polymer dielectrics by introducing 2D SrBi4Ti4O15 nanosheets10.1016/j.ceramint.2020.03.066 ↗
37. High dielectric and breakdown properties achieved in ternary BaTiO3/MXene/PVDF nanocomposites with low-concentration fillers from enhanced interface polarization10.1016/j.ceramint.2019.01.104 ↗
38. Enhanced dielectric properties and energy discharge efficiency of dopamine modified (In0.05Nb0.05)Ti0.9O2 in poly(vinylidene-fluoride) composites10.1016/j.matlet.2017.03.151 ↗
39. Core-satellite ultra-small hybrid Ni@BT nanoparticles: a new route to enhanced energy storage capability of PVDF based nanocomposites
40. Ultrahigh electric displacement and energy density in gradient layer-structured BaTiO3/PVDF nanocomposites with an interfacial barrier effect10.1039/C7TA01522D ↗
41. Boosting gravimetric and volumetric energy density via engineering macroporous MXene films for supercapacitors10.1016/j.cej.2020.124057 ↗
42. An ultrahigh discharged energy density achieved in an inhomogeneous PVDF dielectric composite filled with 2D MXene nanosheets via interface engineering10.1039/C8TC05180A ↗
43. Multilayer-structured transparent MXene/PVDF film with excellent dielectric and energy storage performance10.1039/C9TC02715G ↗
44. BaTiO3 internally decorated hollow porous carbon hybrids as fillers enhancing dielectric and energy storage performance of sandwich-structured polymer composite10.1016/j.nanoen.2019.104351 ↗
45. Flexible BaTiO3/PVDF gradated multilayer nanocomposite film with enhanced dielectric strength and high energy density10.1039/C5TC01903F ↗
46. Ultrahigh breakdown strength and energy density of polymer nanocomposite containing surface insulated BCZT@BN nanofibers10.1016/j.compscitech.2020.108209 ↗
47. Synergetic optimization of thermal conductivity and breakdown strength of boron nitride/poly (vinylidene fluoride) composite film with sandwich intercalated structure for heat management in flexible electronics10.1016/j.compositesa.2020.105933 ↗
48. High energy density of polymer nanocomposites at a low electric field induced by modulation of their topological-structure10.1039/C6TA02186G ↗
49. Improved breakdown strength of Poly(vinylidene Fluoride)-based composites by using all ball-milled hexagonal boron nitride sheets without centrifugation10.1016/j.compscitech.2020.108046 ↗
50. High discharge energy density at low electric field using an aligned Titanium dioxide/lead zirconate titanate nanowire array10.1002/advs.201700512 ↗
51. High dielectric and breakdown properties obtained in a PVDF based nanocomposite with sandwich structure at high temperature via all-2D design10.1039/C9TC01378D ↗
52. High energy storage density of poly(vinylidene fiuoride) bulk nanocomposites at low electric field induced by giant dielectric constant ceramic nanopowders10.1016/j.ceramint.2018.08.119 ↗
53. Lead-free bismuth ferrite-based ceramics learning from relaxor ferroelectric behavior for simultaneous high energy density and efficiency under low electric field10.1039/C8TC03855D ↗
54. Ultrahigh energy-storage potential under low electric field in bismuth sodium titanate-based perovskite ferroelectrics10.1039/C8TA00474A ↗
55. Ultrahigh discharge efficiency and energy density achieved at low electric fields in sandwich-structured polymer films containing dielectric elastomers10.1039/C8TA11790J ↗
56. New antiferroelectric perovskite system with ultrahigh energy-storage performance at low electric field10.1021/acs.chemmater.8b04470 ↗
57. Ultra-high energy storage performance under low electric fields in Na0.5Bi0.5TiO3-based relaxor ferroelectrics for pulse capacitor applications10.1016/j.ceramint.2019.08.238 ↗
58. High energy-storage density under low electric fields and improved optical transparency in novel sodium bismuth titanate-based lead-free ceramics10.1016/j.jeurceramsoc.2019.09.001 ↗
59. Plate-like Na0.5Bi0.5TiO3 particles synthesized by topochemical microcrystal conversion method10.1016/j.jeurceramsoc.2014.10.004 ↗
60. Spark plasma sintering of grain-oriented Sr2Bi4Ti5O18 aurivillius phase ceramics10.1016/j.jallcom.2018.12.175 ↗
61. Enhanced dielectric tunability and energy storage properties of plate-like Ba0.6Sr0.4TiO3/poly(vinylidene fluoride) composites through texture arrangement10.1016/j.compscitech.2018.02.015 ↗
62. Boosting the recoverable energy density of lead-free ferroelectric ceramic thick films through artificially induced quasi-relaxor behavior10.1021/acsami.8b05347 ↗
63. Fast discharge and high energy density of nanocomposite capacitors using Ba0.6Sr0.4TiO3 nanofibers10.1016/j.ceramint.2016.06.090 ↗
64. Ultra-high discharged energy density capacitor using high aspect ratio Na0.5Bi0.5TiO3 nanofibers10.1039/C7TA00136C ↗
65. Ultra high energy density nanocomposite capacitors with fast discharge using Ba0.2Sr0.8TiO3 nanowires10.1021/nl3037273 ↗
66. High-performance capacitors based on NaNbO3 nanowires/poly(vinylidene fluoride) nanocomposites10.1039/C8TA03084G ↗