Effects of raw material ratio and post-treatment on properties of soda lime glass-ceramics fabricated by selective laser sintering
Source abstract
Abstract
Abstract A reliable method for fabricating soda lime glass-ceramics by selective laser sintering was demonstrated. The effect of the ratio of glass powder to epoxy resin and sintering process on the properties and microstructure of glass-ceramics was investigated. Research shows that: with the improvement of glass powder proportion, sintering shrinkage rate declined and mechanical strength could be improved gradually. When the mass ratio of glass powder and epoxy resin powder was 18:1 and heat-holding at 740 °C for 3 h, the shrinkage rate of the sample was 21.11% and the bending strength reached 95.45 MPa. Therefore, this research laid a foundation for 3D printing to fabricate high performance and complex structure glass-ceramics.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Recycling and utilization of industrial and municipal waste in materials production · Pigment Synthesis and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Nanocrystalline glass ceramics: structural, physical and optical properties10.1016/j.molstruc.2014.10.018 ↗
2. Lithium aluminosilicate glass-ceramic containing Na2O for low-temperature anodic bonding in microelectronic mechanical systems10.1016/j.jnoncrysol.2007.02.093 ↗
3. Review – bioactive glass and glass-ceramic scaffolds for bone tissue engineering
4. Glass forming, crystallization, and physical properties of MgO-Al2O3-SiO2-B2O3 glass-ceramics modified by ZnO replacing MgO10.1016/j.jeurceramsoc.2018.10.002 ↗
5. Processing of apatite-wollastonite (AW) glass-ceramic for three dimensional printing (3DP)10.4028/www.scientific.net/AMM.754-755.974 ↗
6. Application and development of ultra low expansion glass-ceramics
7. Properties of selective laser melted spodumene glass-ceramic10.1016/j.jeurceramsoc.2017.04.060 ↗
8. Infiltration of alumina sol into SLS processed porous Al2O3-Al4B2O9 ceramic composites10.1023/A:1006790416275 ↗
9. Performance optimization of complicated structural SiC/Si composite ceramics prepared by selective laser sintering10.1016/j.ceramint.2019.09.004 ↗
10. Selective laser sintering of ceramic powders with bimodal particle size distribution10.1016/j.cherd.2018.06.008 ↗
11. Additive-manufacturing of 3D glass-ceramics down to nanoscale resolution10.1039/C8NH00293B ↗
12. Effect of particle size gradation on the performance of ceramic 3D printing process10.1016/j.ceramint.2016.09.197 ↗
13. Glass powders and reactive silicone binder: interactions and application to additive manufacturing of bioactive glass-ceramic scaffolds10.1016/j.ceramint.2019.04.070 ↗
14. Processing of 45S5 Bioglass® by lithography-based additive manufacturing10.1016/j.matlet.2012.01.019 ↗
15. Effect of polymer coatings as intermediate binders on sintering of ceramic parts
16. Richerson · 2006 · 495