Preparation of aluminum nitride by combustion of a Mg-Al alloy
Source abstract
Abstract
Abstract Aluminum nitride (AlN) was synthesized by combustion of spherical Mg–Al alloy particles in air. Alloy powder was freely poured on a sample table, which formed a cone with a diameter of 1-2 cm. A commercial electro-thermal furnace was used to ignite the cone to start the synthesis. During the combustion, the temperature was measured and the actual burning process was recorded by a video camera. The morphology and phase makeup of the raw powders and the synthesized AlN powders were analyzed by scanning electron microscopy and X-ray diffraction. The thermodynamic properties and ignition temperatures were studied using differential scanning calorimetry and thermogravimetric analysis. Moreover, the effects of the Mg–Al alloy particle size (212.8 μm, 124.1 μm, 61.1 μm, and 29.5 μm) on the morphology of AlN were investigated. The results show that the combustion of Mg greatly promoted the nitridation of Al and that Al in both large and small alloy particles could be completely converted into AlN. The combustion products of the alloy consisted of two different layers: an upper white layer containing MgO and a lower black layer containing AlN. More AlN whiskers formed when small particles were used. However, very small Mg–Al alloy particles hindered the formation of AlN whiskers.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Energetic Materials and Combustion · Advanced ceramic materials synthesis · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Enhanced thermal conductivity of polymer matrix composite via high solids loading of aluminum nitride in epoxy resin10.1111/j.1551-2916.2008.02247.x ↗
2. The variations of thermal contact resistance and heat transfer rate of the AlN film compositing with PCM
3. Investigations on AlN/sapphire piezoelectric bilayer structure for high-temperature SAW applications10.1109/TUFFC.2012.2285 ↗
4. Field emission from open ended aluminum nitride nanotubes10.1063/1.1482137 ↗
5. Applications of aluminum nitride (AlN) ceramics
6. Effect of reaction conditions on the synthesis of ultrafine aln powder with glucose as carbon source10.13168/cs.2018.0020 ↗
7. Carbothermal synthesis of spherical AlN granules: effects of synthesis parameters and Y2O3 additive10.1016/j.ceramint.2015.01.114 ↗
8. Carbothermal synthesis of micro-scale spherical AlN granules with CaF2 additive10.1016/j.jallcom.2015.12.178 ↗
9. Combination nonviral murine interleukin 2 and interleukin 12 gene therapy and radiotherapy for head and neck squamous cell carcinoma10.1001/archotol.131.12.1079 ↗
10. High-pressure direct synthesis of aluminium nitride10.1088/0953-8984/14/44/460 ↗
11. Spherical AlN particles synthesized by the carbothermal method: effects of reaction parameters and growth mechanism10.1016/j.ceramint.2017.12.071 ↗
12. Low-temperature-controlled synthesis and growth mechanism of AlN whiskers10.1179/1432891715Z.0000000001314 ↗
13. Synthesis and characterization of nanoparticles of wurtzite aluminum nitride from various nut shells10.1016/j.jallcom.2017.03.003 ↗
14. Impact of structure and flow-path on in situ synthesis of AlN: dynamic microstructural evolution of Al-AlN-Si materials10.1007/s40843-017-9198-4 ↗
15. A thermochemical pathway for controlled synthesis of AlN nanoparticles in non-isothermal conditions10.1016/j.tca.2015.01.021 ↗
16. Combustion based synthesis of AlN nanoparticles using a solid nitrogen promotion reaction10.1111/jace.13920 ↗
17. Gas-phase synthesis of hexagonal and cubic phases of aluminum nitride: a method and its advantages10.1134/S106378501603010X ↗
18. Effects of Al particle size and nitrogen pressure on AlN combustion synthesis10.1016/j.ceramint.2017.04.170 ↗
19. Combustion synthesis of ZrN and AlN using Si 3 N 4 and BN as solid nitrogen sources10.1016/j.ceramint.2018.03.200 ↗
20. Ignition and combustion of Al·Mg alloy powders prepared by different techniques10.1016/j.combustflame.2014.11.010 ↗
21. Oxidation of differently prepared Al-Mg alloy powders in oxygen10.1016/j.jallcom.2016.05.302 ↗
22. Study of aluminum nitride formation by superfine aluminum powder combustion in air10.1016/j.jeurceramsoc.2003.09.020 ↗
23. Investigation of the aluminum nitride formation during the aluminum nanopowder combustion in air
24. Morphologies and growth mechanisms of aluminum nitride whiskers by SHS method - Part 210.1023/A:1004732314397 ↗
25. Controllable synthesis of AlN nanostructures and their photoluminescence10.1039/C7CE01335C ↗
26. A modified direct nitridation method for formation of nano-AlN whiskers10.1016/j.jmatprotec.2006.03.045 ↗
27. Growth of quasi-aligned AlN nanofibers by nitriding combustion synthesis10.1111/j.1551-2916.2007.01747.x ↗