Electrodeposition of ZnO Nanoprism-Zn substituted hydroxyapatite duplex layer coating for carbon fiber
Source abstract
Abstract
Abstract A ZnO nanoprism/Zn substituted hydroxyapatite duplex layer (ZnOnp-ZnHA) coating was prepared on carbon fibers (CF) by two-step electrodeposition method. The ZnOnp-ZnHA coating on CF was characterized by Scanning Electron Microscopy, Transmission Electron Microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, Energy dispersive spectrometer, Raman spectra and Thermogravimetric Analysis. The formation mechanism of the duplex layer coating was discussed. The in-vitro bioactivity of the duplex layer coating was investigated by simulated body fluid (SBF) immersion test. The ZnOnp interlayer showed nanoprism morphology with a length of 0.4–0.9 μm and a diameter of 117–220 nm. We found both the CF and the ZnOnp could serve as nucleation sites for ZnHA layer. The ZnHA outer layer showed ball-like morphology with a diameter of 0.6–1.7 μm. The duplex layer coating exhibited suitable in-vitro bioactivity using SBF immersion test method. The ZnOnp-ZnHA duplex layer coated CF may serve as a promising candidate for clinic applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Additive Manufacturing and 3D Printing Technologies · Electrospun Nanofibers in Biomedical Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Carbon materials in the treatment of soft and hard tissue injuries
2. Long-term local effects of carbon fiber in the knee10.1016/j.knee.2003.10.003 ↗
3. Unique cytological behavior of MC3T3-E1 osteoblasts on H2O2-modified C/C composites in vitro10.1007/s40843-016-9015-9 ↗
4. Surface defects repairing of sprayed Ca-P coating by the microwave-hydrothermal method10.1016/j.ceramint.2018.08.258 ↗
5. Carbon fiber biocompatibility for implants
6. Carbon fibre composite bone plates. Development, evaluation and early clinical experience10.1302/0301-620X.72B4.2380209 ↗
7. In situ grown Si3N4 microbelt/Mg doped hydroxyapatite dual-layer coating on carbon/carbon composites for biomedical application10.1016/j.matlet.2017.01.132 ↗
8. Mechanical properties of the supersonic atmospheric plasma sprayed Ca-P coating post-processed by a microwave-hydrothermal method10.1016/j.msec.2018.10.076 ↗
9. Bone cell–material interactions on metal-ion doped polarized hydroxyapatite10.1016/j.msec.2011.01.003 ↗
10. Spectroscopic investigation on formation and growth of mineralized nanohydroxyapatite for bone tissue engineering applications10.1016/j.saa.2012.02.069 ↗
11. Fibrous growth of strontium substituted hydroxyapatite and its drug release10.1016/j.msec.2010.11.025 ↗
12. Structural characterization of sol–gel derived Sr-substituted calcium phosphates with anti-osteoporotic and anti-inflammatory properties10.1039/b804140g ↗
13. Impact of zinc supplementation on respiratory and gastrointestinal infections: a double-blind,randomized trial among urban Iranian school children10.1542/peds.2007-2022QQQQQQ ↗
14. Zinc in attention-deficit/hyperactivity disorder10.1089/cap.2005.15.619 ↗
15. Zinc homeostasis and signaling in health and diseases10.1007/s00775-011-0797-4 ↗
16. Osteogenic activity and antibacterial effects on titanium surfaces modified with Zn-incorporated nanotube arrays10.1016/j.biomaterials.2013.01.071 ↗
17. Antimicrobial properties of ZnO nanomaterials: a review10.1016/j.ceramint.2016.12.062 ↗
18. Functional finishing of cotton fabrics using zinc oxide–soluble starch nanocomposites10.1088/0957-4484/17/20/008 ↗
19. Influence of Cu doping and post heat treatment on the microstructure, optical properties and photoluminescence features of sol-gel derived nanostructured CdS thin films10.1016/j.jlumin.2013.03.029 ↗
20. Effects of the Cd:Zn:S molar ratio and heat treatment on the optical and photoluminescence properties of nanocrystalline CdZnS thin films10.1016/j.mssp.2013.03.014 ↗
21. Growth, characterization and studying of sol–gel derived CdS nanoscrystalline thin films incorporated in polyethyleneglycol: effects of post-heat treatment10.1016/j.solmat.2012.05.014 ↗
22. Effect of microwave heating time on bonding strength and corrosion resistance of Ca-P composite layers for carbon/carbon composites10.1016/j.jallcom.2017.04.189 ↗
23. Surface analysis of unsized and sized carbon fibers10.1016/S0008-6223(98)00300-5 ↗
24. Effect of acid–base properties of unsized and sized carbon fibers on fiber/epoxy matrix adhesion10.1016/S0927-7757(99)00400-8 ↗
25. The rapid preparation of ZnO nanorods via low-temperature solochemical method10.1166/jnn.2011.4183 ↗
26. Formation of dicalcium phosphate dehydrate coating on carbon fibers with in-situ grown graphene nanosheet interlayer10.1016/j.ceramint.2017.01.128 ↗
27. Transformation of monetite to hydroxyapatite in bioactive coatings on titanium10.1016/S0257-8972(00)01125-7 ↗
28. Direct formation of nanophase hydroxyapatite on cathodically polarized electrodes10.1023/A:1008838813120 ↗