journal article·2018-12

Fabrication of super flux and high thermal shock resistance ceramic membrane support

Wenmin Zhang, Kang Guan, Defang Liu, Cheng Peng, Jianqing Wu

Ceramics International· Volume 44· Issue 17
Publisher page

Abstract

Abstract Ceramic membranes play an important role in high temperature gas-solid filtration. However, the thermal stability of the ceramic support at high temperatures has always been a problem. In this study, porous fused silica ceramic supports were fabricated with hexagonal boron nitride as a sintering aid. The results shown that hexagonal boron nitride could inhibit the crystallization of fused silica ceramic particles at high temperature and act as a sintering addictive to reduce firing temperature. The obtained supports have an average pore size of 72 µm, an open porosity of 42%, a bending strength of 16.5 MPa, a Weibull modulus of 8.67 and a gas permeability of 4.23 × 10 5 m 3 /(m 2 h bar). The bending strength of the support remained 16 MPa after 30 cold-hot cycles, exhibiting high thermal shock resistance. After corrosion in 20 vol% H 2 SO 4 solution for 8 h, the weight and the bending strength of the support were diminished by 0.6% and 24.32%, respectively. So, the ceramic support showed good acid corrosion resistance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gas Dynamics and Kinetic Theory · Advanced ceramic materials synthesis · Combustion and Detonation Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Retrofit SO2 and NOx control technologies for coal‐fired power plants
2. Effects of a coal-fired power plant and other sources on southwestern visibility (interim summary of EPA'S project VISTTA)10.1016/0004-6981(81)90230-4 ↗
3. Modelling and prediction of NOx emission in a coal-fired power generation plant10.1016/S0967-0661(03)00171-0 ↗
4. Primary air pollutant emissions of coal-fired power plants in China: current status and future prediction10.1016/j.atmosenv.2008.08.021 ↗
5. Hot gas filtration – a review10.1016/j.fuel.2012.07.059 ↗
6. Permeability and mechanical integrity of porous biomorphic SiC ceramics for application as hot-gas filters10.1016/j.matdes.2016.06.060 ↗
7. Silicon carbide membranes for gas separation applications10.1016/j.memsci.2006.11.027 ↗
8. Preparation and characterization of SiC whisker-reinforced SiC porous ceramics for hot gas filtration10.1021/ie503626u ↗
9. High gas permeability of SiC porous ceramics reinforced by mullite fibers10.1016/j.jeurceramsoc.2016.06.048 ↗
10. Preparation of porous SiC ceramic with a woodlike microstructure by sol-gel and carbothermal reduction processing10.1016/j.jeurceramsoc.2003.10.042 ↗
11. Effect of V2O5 addition on the properties of reaction-bonded porous SiC ceramics10.1016/j.ceramint.2014.08.016 ↗
12. Phase transition and thermal expansion studies of alumina thin films prepared by reactive pulsed laser deposition10.1166/jnn.2014.9480 ↗
13. Preparation of cordierite-based porous ceramic micro-filtration membranes using waste fly ash as the main raw materials10.1016/j.memsci.2006.08.032 ↗
14. Effects of sintering temperature on phases, microstructures and properties of fused silica ceramics10.4028/www.scientific.net/KEM.726.399 ↗
15. V.P. Mehrotra, R.E. Barker, I. Pitmanmoore, Process for producing high purity fused quartz powder. United state patent NO. 5004488, 1991.
16. Preparation of non-oxide SiC membrane for gas purification by spray coating10.1016/j.memsci.2017.06.076 ↗
17. Effect of rare earth oxide on sintering and crystallization of fused quartz ceramic materials10.4028/www.scientific.net/AMR.97-101.880 ↗
18. Study on sintering properties and crystallization of fused quartz ceramic materials containing BN-B4C.10.4028/www.scientific.net/AMM.217-219.43 ↗
19. influence of B4C additive on sintering and crystallization of fused silica ceramics
20. Preparation and characterization of SiC whisker-reinforced SiC porous ceramics for hot gas filtration10.1021/ie503626u ↗
21. Low-temperature sintering of porous silicon carbide ceramic support with SDBS as sintering aid10.1016/j.ceramint.2016.11.183 ↗
22. Fabrication and properties of cordierite–mullite bonded porous SiC ceramics10.1016/j.ceramint.2013.11.078 ↗
23. Preparation of highly stable porous SiC membrane supports with enhanced air purification performance by recycling NaA zeolite residue10.1016/j.memsci.2017.07.040 ↗