Synthesis of monocrystalline tungsten carbide powder in carbon saturated cobalt melt
Source abstract
Abstract
Abstract To prepare coarse-grained tungsten carbide powder, it is necessary to choose large-sized initial tungsten powder and carburize at a higher temperature for a long time. Moreover, there are still lots of cracks in the particle due to the agglomeration by primary grains. In this article monocrystalline tungsten carbide grew in carbon saturated cobalt melt. After removing the impurities, the monocrystalline tungsten carbide powder was characterized by scanning electron microscope and selected area electron diffraction. Compared with the ordinary tungsten carbide, the obtained powder was monocrystalline (5–20 µm) and has few visible cracks, which could apply to the rock drilling cemented carbide.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Injection Molding Process and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Rock penetration into cemented carbide drill buttons during rock drilling10.1016/j.wear.2007.01.029 ↗
2. Macroparticle generation in DC arc discharge from a WC cathode10.1063/1.4978306 ↗
3. Influences of the preparation methods of WC–Co powders on the sintering and microstructure of coarse grained WC–8Co hardmetals10.1016/j.ijrmhm.2014.10.012 ↗
4. Effects of WC particle size on sintering behavior and mechanical properties of coarse grained WC–8Co cemented carbides fabricated by unmilled composite powders10.1016/j.ceramint.2015.07.086 ↗
5. On the mechanism of WC coarsening in WC-Co hardmetals with various carbon contents10.1016/j.ijrmhm.2008.09.001 ↗
6. Fracture and fatigue of rock bit cemented carbides: mechanics and mechanisms of crack growth resistance under monotonic and cyclic loading10.1016/j.ijrmhm.2014.04.010 ↗
7. Crack initiation and propagation behavior of WC particles reinforced Fe-based metal matrix composite produced by laser melting deposition10.1016/j.optlastec.2016.03.008 ↗
8. Quantitative analysis of the effect of the binder phase composition on grain growth in WC-Co sintered materials10.1023/A:1024418131674 ↗
9. Effect of reinforcement volume fraction on the evolution of reinforcement size during the extrusion of Al-SiC composites10.1016/S0921-5093(01)01526-X ↗
10. Synthesis, microstructure and properties characterization of disintegrated melt deposited Mg/SiC composites10.1023/A:1004706321731 ↗
11. Preparation of in situ-formed WC/Fe composite on gray cast iron substrate by a centrifugal casting process10.1016/j.jmatprotec.2010.07.013 ↗
12. Preparation and crystal growth of non-oxidic refractories from molten metallic solutions10.1016/0022-5088(84)90065-1 ↗
13. Variation of WC grain shape with carbon content in the WC–Co alloys during liquid-phase sintering10.1016/S1359-6462(02)00464-5 ↗
14. Carbon – Cobalt – Tungsten