Effect of grinding and subsequent thermal annealing on phase composition of subsurface layers of zirconia ceramics
Source abstract
Abstract
Abstract The purpose of this study was to evaluate the effect of surface grinding and thermal annealing on phase composition of the subsurface layers of zirconia ceramics sintered from ultradisperse plasma-chemical powders ZrO 2 – 3 mol% Y 2 O 3 . The phase composition was determined using X-ray diffraction (XRD) analysis. The obtained results indicated that the phase composition of the sintered zirconia ceramics does not change throughout the volume and consists of tetragonal zirconia. The study showed that surface grinding leads to the formation of a monoclinic (m) phase in the subsurface layers of ceramics, and the monoclinic phase formed after grinding undergo a reverse phase transition to the tetragonal (t) modification during subsequent short-term thermal annealing at T = 1000 °C. Recovery by thermal annealing is recommended as a mandatory procedure for XRD analysis of zirconia ceramics subjected to surface grinding.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Dental materials and restorations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Ceramic steel?10.1038/258703a0 ↗
2. Tetragonal zirconia polycrystal (TZP) – a review10.1016/0267-3762(87)90060-9 ↗
3. Synthesis and characterization of yttria-stabilized zirconia (YSZ) nano-clusters for thermal barrier coatings (TBCs) applications10.1007/s10876-016-1014-y ↗
4. The tetragonal–monoclinic transformation in zirconia: lesson learned and future trends10.1111/j.1551-2916.2009.03278.x ↗
5. Stabilization of tetragonal structure in zirconia microcrystals10.1021/j100491a016 ↗
6. The tetragonal-monoclinic transformation in zirconia: lessons learned and future trends10.1111/j.1551-2916.2009.03278.x ↗
7. Transformation toughening. Part 3: experimental observation in the ZrO2 –Y2O3 system10.1007/BF00809059 ↗
8. Lisa · Adv. Ceram. Process. · 2007 · 1113
9. The effect of surface grinding and sandblasting on flexural strength and reliability of Y-TZP zirconia ceramic10.1016/S0109-5641(99)00070-6 ↗
10. Zirconia changes after grinding and regeneration firing10.1016/j.prosdent.2016.09.026 ↗
11. A study on topographical properties and surface wettability of monolithic zirconia after use of diverse polishing instruments with different surface coatings
12. The effect of air-abrasion and heat treatment on the fracture behavior of Y-TZP10.1016/j.dental.2015.05.008 ↗
13. Effect of sandblasting on the long-term performance of dental ceramics10.1002/jbm.b.30097 ↗
14. In vitro evaluation of low-temperature aging effects and finishing procedures on the flexural strength and structural stability of Y-TZP dental ceramics10.1016/j.prosdent.2006.08.004 ↗
15. Damage accumulation and fatigue life of particle-abraded ceramics
16. Erosion of alumina ceramics by air- and water-suspended garnet particles10.1016/S0043-1648(00)00335-5 ↗
17. Patent RU 2076069, C01G25/02; 1997.
18. A plasmochemical process for manufacture of ultrafine metal oxide powders and their promising applications
19. A dilatometric study of the martensitic transformation of zirconia containing 1.8–2.0mol% yttria10.2320/matertrans.42.450 ↗
20. Investigation of sintering behaviour of ZrO2 (Y) ceramic green body by means of non-isothermal dilatometry and thermokinetic analysis10.1007/s10973-016-5966-9 ↗
21. Surface and grain boundary analysis of doped zirconia ceramics by AES and XPS10.1007/BF01105274 ↗