Effects of isothermal oxidation on microstructure and mechanical properties of thermal barrier coatings
Source abstract
Abstract
Abstract An 8 (wt.) % yttria partially stabilized zirconia (YSZ) coating isothermally oxidized in air at 1100 °C for up to 3000 h was investigated by means of indentation and electron microscopy analyses. It is found that the growth kinetics of thermally grown oxides followed a parabolic law. The apparent porosity within the coatings decreased after isothermal oxidation. The tetragonal prime YSZ phase transformed into cubic and then monoclinic phases during isothermal oxidation. Elastic modulus, microhardness and fracture toughness of the coating increased as oxidation duration prolonged. The correlation between microstructural variation and mechanical properties was discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Thermal barrier coatings for gas-turbine engine applications10.1126/science.1068609 ↗
2. Materials design for the next generation thermal barrier coatings10.1146/annurev.matsci.33.011403.113718 ↗
3. The hotter the engine, the better10.1126/science.1179327 ↗
4. Study of the high temperature oxidation performance of Thermal Barrier Coatings with HVOF sprayed bond coat and incorporating a PVD ceramic interlayer10.1016/j.ceramint.2012.05.016 ↗
5. A comprehensive sintering mechanism for TBCs-Part I: an overall evolution with two-stage kinetics10.1111/jace.14784 ↗
6. Phase stability, thermo-physical properties and thermal cycling behavior of plasma-sprayed CTZ, CTZ/YSZ thermal barrier coatings10.1016/j.ceramint.2018.02.149 ↗
7. Porosity analysis and oxidation behavior of plasma sprayed YSZ and YSZ/LaPO4 abradable thermal barrier coatings10.1016/j.ceramint.2016.07.057 ↗
8. Spark plasma sintering of a multilayer thermal bather coating on Inconel 738 superalloy: microstructural development and hot corrosion behavior10.1016/j.ceramint.2015.11.008 ↗
9. Influence of pores on mechanical properties of plasma sprayed coatings: case study of YSZ thermal barrier coatings10.1016/j.ceramint.2018.08.220 ↗
10. Microstructural characterization of yttria-stabilized zirconia plasma-sprayed deposits using multiple small-angle neutron scattering10.1016/S1359-6454(00)00393-1 ↗
11. A prominent driving force for the spallation of thermal barrier coatings: chemistry dependent phase transformation of the bond coat10.1016/j.actamat.2017.06.037 ↗
12. Effect of TGO thickness on the thermal barrier coatings life under thermal shock and thermal cycle loading10.1016/j.ceramint.2018.02.140 ↗
13. Towards enhanced sintering resistance: air-plasma-sprayed thermal barrier coating system with porosity gradient10.1016/j.jeurceramsoc.2017.12.008 ↗
14. Phase evolution upon aging of air plasma sprayed t’-zirconia coatings: II-microstructure evolution10.1111/j.1551-2916.2012.05460.x ↗
15. Microstructural evolution at interfaces of thermal barrier coatings during isothermal oxidation10.1016/j.jeurceramsoc.2016.02.011 ↗
16. Microstructural and mechanical property evolutions of plasma-sprayed YSZ coating during high-temperature exposure: comparison study between 8YSZ and 20YSZ10.1007/s11666-013-9986-8 ↗
17. Evolution of mechanical properties of thermal barrier coatings subjected to thermal exposure by instrumented indentation testing10.1016/j.ceramint.2016.03.149 ↗
18. High temperature fracture toughness and residual stress in thermal barrier coatings evaluated by an in-situ indentation method10.1016/j.ceramint.2018.01.230 ↗
19. Determination of parabolic rate constants from a local analysis of mass-gain curves10.1023/A:1018860909826 ↗
20. TEM analysis of the microstructure of thermal barrier coatings after isothermal oxidation10.1016/j.actamat.2012.09.028 ↗
21. The effect of grain size on the oxidation of NiCoCrAlY10.1016/j.apsusc.2014.02.056 ↗
22. Microstructural evolution of the interface between NiCrAlY coating and superalloy during isothermal oxidation10.1016/j.matdes.2015.05.014 ↗
23. A sintering model for plasma-sprayed zirconia thermal barrier coatings. Part II: coatings bonded to a rigid substrate10.1016/j.actamat.2008.10.058 ↗
24. Transformation of electron-beam physical vapor-deposited 8 wt% yttria-stabilized zirconia thermal barrier coatings10.1111/j.1551-2916.2005.00452.x ↗
25. The effect of heat treatment on the stiffness of zirconia top coats in plasma-sprayed TBCs10.1016/S1359-6454(01)00065-9 ↗
26. Thermophysical, mechanical and microstructural characterization of aged free-standing plasma-sprayed zirconia coatings10.1016/j.actamat.2008.04.067 ↗
27. Thermal aging behavior of axial suspension plasma-sprayed yttria-stabilized zirconia (YSZ) thermal barrier coatings10.1007/s11666-014-0206-y ↗
28. Mechanical properties of high-temperature-degraded yttria-stabilized zirconia10.1016/j.actamat.2014.01.017 ↗
29. The monoclinic-tetragonal transformation and associated twinning in thin films of zirconia10.1098/rspa.1964.0112 ↗
30. The martensitic transformation in ceramics — its role in transformation toughening10.1016/S0079-6425(00)00005-0 ↗
31. Microstructural changes and phase transformations in a plasma-sprayed zirconia-yttria-titania thermal barrier coating10.1016/0257-8972(95)02721-1 ↗
32. Statistical properties of Weibull estimators10.1007/BF02402669 ↗
33. Strength and toughness of tape-cast yttria-stabilized zirconia10.1111/j.1151-2916.2000.tb01507.x ↗
34. Optical and mechanical properties of amorphous and crystalline yttria-stabilized zirconia thin films prepared by pulsed laser deposition10.1016/j.actamat.2010.12.029 ↗
35. A critical-evaluation of indentation techniques for measuring fracture-toughness: I, direct crack measurements10.1111/j.1151-2916.1981.tb10320.x ↗
36. Evolution of Young's modulus of air plasma sprayed yttria-stabilized zirconia in thermally cycled thermal barrier coatings10.1016/j.scriptamat.2006.01.021 ↗
37. Correlations between microstructure and mechanical properties of air plasma-sprayed thermal barrier coatings exposed to a high temperature10.1111/jace.12621 ↗