Processing of porous ceramics from highly concentrated suspensions by foaming, in situ polymerization and burn-out of polylactide fibers
Source abstract
Abstract
Abstract The paper presents the preparation of porous alumina samples by two techniques. The first one is based on the in situ polymerization of the foamed slurries. The second method is based on the gelcasting of slurries containing polylactide fibers (PLA) and subsequent bun-out of these pore-formers. Foaming has been done in air and nitrogen in order to analyze the influence of the oxygen inhibition on the properties of obtained samples. The prepared slurries were characterized by high concentration of alumina powder (50 and 55 vol %) in order to obtain well densified walls between the pores and as a result high compressive strength of obtained samples. DTA/TG analysis coupled with mass spectrometry allowed to identify the type of gases released to the atmosphere during the thermal decomposition of the PLA fibers and the surfactant Tergitol used in the research. The application of the PLA fibers allows to design the shape of pores; moreover, fibers are well replicated in the ceramic bodies and the burn-out of these pore-formers is not harmful for the environment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Aerogels and thermal insulation · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Processing of cellular ceramics by foaming and in situ polymerisation of organic monomers10.1016/S0955-2219(99)00024-2 ↗
2. Design and fabrication of porous ZrO2/(ZrO2+ Ni) sandwich ceramics with low thermal conductivity and high strength10.1016/j.matdes.2014.05.006 ↗
3. Effect of particle size on the shaping of ceramics by slip casting10.1016/j.jeurceramsoc.2010.03.019 ↗
4. Novel scaffolds based on hydroxyapatite/poly(vinyl alcohol) nanocomposite coated porous TiO2 ceramics for bone tissue engineering10.1016/j.ceramint.2015.09.101 ↗
5. Structuring adsorbents and catalysts by processing of porous powders10.1016/j.jeurceramsoc.2014.01.008 ↗
6. Porosity of freeze-dried γ-Al2O3 powders10.1016/j.ceramint.2006.03.021 ↗
7. Enhanced in vitro bioactivity of porous NiTi–HA composites with interconnected pore characteristics prepared by spark plasma sintering10.1016/j.matdes.2016.03.128 ↗
8. Alumina ceramics prepared with new pore-forming agents10.2298/PAC0801001Z ↗
9. Destructive Interactions between pore forming agents and matrix phase during the fabrication process of porous BiFeO3 ceramics10.1016/j.jmst.2015.05.002 ↗
10. C. Wang, H. Chen, X. Zhu, Z. Xiao, K. Zhang, X. Zhang. An improved polymeric sponge replication method for biomedical porous titanium scaffolds. Mater. Sci. Eng. C doi:10.1016/j.msec.2016.03.037.10.1016/j.msec.2016.03.037 ↗
11. The effect of sago as binder in the fabrication of alumina foam through the polymeric sponge replication technique10.1016/j.jeurceramsoc.2014.12.005 ↗
12. Ammonium hydrogen carbonate provided viscous slurry foaming - a novel technology for the preparation of porous ceramics10.1016/j.jeurceramsoc.2013.06.010 ↗
13. Shaping of porous mullite green bodies by foaming and thermal gelation of bovine serum albumin10.1016/j.jeurceramsoc.2015.01.010 ↗
14. Strength and fracture of porous ceramic sintered from spherical particles10.1007/BF00752119 ↗
15. Mechanical performance and CO2 uptake of ion-exchanged zeolite A structured by freeze-casting10.1016/j.jeurceramsoc.2015.03.001 ↗
16. Reproducibility of ZrO2-based freeze casting for biomaterials10.1016/j.msec.2015.12.012 ↗
17. Processing and properties of advanced porous ceramics: an application based review10.1016/j.ceramint.2014.06.095 ↗
18. Mechanical strength and damage tolerance of highly porous alumina ceramics produced from sintered particle stabilized foams10.1016/j.ceramint.2016.02.069 ↗
19. Comparison methods for microstructure analysis on highly porous extrudates based on diatomite filter aids10.1016/j.micromeso.2012.12.022 ↗
20. Manufacturing of highly porous calcium phosphate bioceramics via gel-casting using agarose10.1016/j.ceramint.2008.12.006 ↗
21. Development and mechanical characterization of novel ceramic foams fabricated by gel-casting10.1016/j.jeurceramsoc.2013.01.038 ↗
22. Preparation, microstructure and high temperature performances of porous γ-Y2Si2O7 by in situ foam-gelcasting using gelatin10.1016/j.ceramint.2015.07.051 ↗
23. Overcoming oxygen inhibition in UV-curing of acrylate coatings by carbon dioxide inerting, Part I10.1016/S0300-9440(03)00120-6 ↗
24. Organic additives in gel-tape casting of ceramic powders - novel approach to the problem of elasticity and cracking of thin tapes10.1016/j.jeurceramsoc.2015.05.028 ↗
25. Thermal decomposition of monosaccharides derivatives applied in ceramic gelcasting process investigated by the coupled DTA/TG/MS analysis10.1007/s10973-012-2411-6 ↗
26. Thermal degradation of organic additives used in colloidal shaping of ceramics investigated by the coupled DTA/TG/MS analysis10.1007/s10973-015-5075-1 ↗
27. Experimental and numerical estimation of strength and fragmentation of different porosity alumina ceramics10.1016/j.matdes.2015.08.117 ↗
28. Monomer systems for the gelcasting of foams10.1016/S0955-2219(01)00486-1 ↗
29. Gelcasting of alumina foams using agarose solutions10.1016/j.ceramint.2007.02.001 ↗
30. Study on pore-forming agents in processing of porous piezoceramics10.1007/s10854-005-3746-6 ↗
31. Porous ceramics prepared using poppy seed as a pore-forming agent10.1016/j.ceramint.2006.05.019 ↗
32. Processing, microstructure and elastic properties of mullite-based ceramic foams prepared by direct foaming with wheat flour10.1016/j.jeurceramsoc.2015.09.028 ↗
33. Effects of pore structure on thermal conductivity and strength of alumina porous ceramics using carbon black as pore-forming agent10.1016/j.ceramint.2016.02.032 ↗
34. Fabrication and characterisation of cellular alumina articles produced via radiation curable dispersions10.1016/j.jeurceramsoc.2012.02.014 ↗