Enhanced microwave absorption of La0.7Sr0.3MnO3−δ based composites with added carbon black
Source abstract
Abstract
Abstract Composites consisting of carbon black (CB) particles, La 0.7 Sr 0.3 MnO 3− δ (LSMO) powder, and epoxy resin were prepared for development of a high performance microwave absorber. This study investigated the influence of adding amounts of LSMO powder (60, 70, and 80 wt%) on complex permittivity, complex permeability, and reflection loss for CB (5 wt%)-epoxy composites. The variation of complex permittivity and complex permeability with frequency of the composites was measured by the cavity perturbation technique in the range of 7–14 GHz. It was found that the real part of the complex permittivity increased with increasing LSMO addition and the imaginary part of the complex permeability decreased with increasing frequency. The microwave absorption results indicated that the composite filled with 5 wt% CB particles and 80 wt% LSMO powder had the best absorption performance. The maximum reflection loss was −23.63 dB at 7.87 GHz and the absorbing bandwidth at −10 dB was 1.75 GHz with a matching thickness of 5 mm.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electromagnetic wave absorption materials · Advanced Antenna and Metasurface Technologies · Microwave Dielectric Ceramics Synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Complex permittivity, complex permeability and microwave absorption properties of ferrite-paraffin polymer composites10.1016/j.jmmm.2011.02.030 ↗
2. Microwave absorption properties of a wave-absorbing coating employing carbonyl-iron powder and carbon black10.1016/j.apsusc.2010.07.078 ↗
3. Microwave absorption properties of Nd0.7Sr0.3MnO3 prepared using high-energy ball milling10.1016/j.jallcom.2012.11.179 ↗
4. Attractive microwave-absorbing properties of La1−xSrxMnO3 manganite powders10.1016/S0254-0584(02)00039-1 ↗
5. Effect of carbon black content on electrical and microwave absorbing properties of polyaniline/carbon black nanocomposites10.1016/j.polymdegradstab.2007.11.009 ↗
6. Microwave absorbing properties of iron nanowire at x-band frequencies10.1063/1.3561449 ↗
7. Surface potential and magnetic properties of La0.7Sr0.3MnO3 periodic arrays fabricated by direct electron beam writing10.1063/1.2957489 ↗
8. Systematic study of the growth of aligned arrays of α-Fe2O3 and Fe3O4 nanowires by a vapor-solid process10.1002/adfm.200600499 ↗
9. Measurements of complex permittivity with waveguide resonator using perturbation technique10.1002/(SICI)1098-2760(19990520)21:4<269::AID-MOP11>3.0.CO;2-U ↗
10. New cavity perturbation technique for measuring complex permeability of ferrite materials10.1002/(SICI)1098-2760(199807)18:4<241::AID-MOP1>3.0.CO;2-E ↗
11. Complex permittivity measurements using cavity perturbation technique with substrate integrated waveguide cavities10.1063/1.3442512 ↗
12. Measurements of microwave dielectric properties by an amended cavity perturbation technique10.1016/j.measurement.2008.03.017 ↗
13. Electromagnetic and microwave absorption performance of some transition metal doped La0.7Sr0.3Mn1−xTMxO3±δ (TM=Fe, Co or Ni)10.1016/j.mseb.2012.03.015 ↗
14. Electromagnetic and microwave absorption properties of carbonyl iron/La0.6Sr0.4MnO3 composites10.1016/j.jmmm.2009.08.037 ↗
15. Dielectric, magnetic, and microwave absorbing properties of multi-walled carbon nanotubes filled with Sm2O3 nanoparticles10.1016/j.matlet.2008.10.015 ↗
16. Effect of the soft/hard exchange interaction on natural resonance frequency and electromagnetic wave absorption of the rare earth–iron–boron compounds10.1016/j.jmmm.2004.04.105 ↗