Optimization of a ScCeSZ/GDC bi-layer electrolyte fabrication process for intermediate temperature solid oxide fuel cells
Source abstract
Abstract
Cost-effective wet ceramic coating techniques for fabricating ScCeSZ/GDC bi-layer electrolyte anode-supported button cells were investigated in this study. Aqueous ceramic slurries were prepared by ball milling and then used for Ni/ScCeSZ half cell fabrication by tape casting and spin coating. Prepared cells were tested at operating temperature between 700 and 800°C with a fuel composition of hydrogen:nitrogen 3:1 and air at the cathode. The cell with a spin coated GDC film showed the maximum power density of 1.142, 1.012, 0.813 W•cm−2 at 800, 750, and 700°C, respectively. It was also able to produce power output around 0.7 W•cm−2 for 500 h at 750°C, which confirms the cell operational stability. More importantly, the GDC film prepared by spin coating effectively avoided the formation of the (Zr,Ce)O2−based solid solution at the ceria/zirconia interface compared with the other cells with the co-casted and sintered GDC film.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Kendall · 2015
2. Manufacturing porous ceramic materials by tape casting—a review10.1016/j.jeurceramsoc.2017.11.047 ↗
3. Development of a new ceria/yttria-ceria double-doped bismuth oxide bilayer electrolyte low-temperature SOFC with higher stability10.1007/s11581-019-02838-4 ↗
4. A review of recent progress in coatings, surface modifications and alloy developments for solid oxide fuel cell ferritic stainless steel interconnects10.1016/j.jpowsour.2009.09.069 ↗
5. Mechanism of Cr deposition and its application in the development of Cr-tolerant cathodes of solid oxide fuel cells10.1016/j.ssi.2008.01.006 ↗
6. A review of solid oxide fuel cell component fabrication methods toward lowering temperature10.1002/er.4907 ↗
7. Oxide-ion electrolytes10.1146/annurev.matsci.33.022802.091651 ↗
8. Stability of LSCF electrode with GDC interlayer in YSZ-based solid oxide electrolysis cell10.1016/j.ssi.2014.01.001 ↗
9. Stability of La0.6Sr0.4Co0.2Fe0.8O3/Ce0.9Gd0.1O2 cathodes during sintering and solid oxide fuel cell operation10.1016/j.jpowsour.2015.02.064 ↗
10. High-performance solid oxide electrolysis cell based on ScSZ/GDC (scandia-stabilized zirconia/gadolinium-doped ceria) bi-layered electrolyte and LSCF (lanthanum strontium cobalt ferrite) oxygen electrode10.1016/j.energy.2015.06.109 ↗
11. Durability and performance of CGO barriers and LSCF cathode deposited by spray-pyrolysis10.1016/j.jeurceramsoc.2018.03.024 ↗
12. Performance of a double-layer CGO/YSZ electrolyte for solid oxide fuel cells10.1007/BF02375951 ↗
13. A study of multilayer tape casting method for anode-supported planar type solid oxide fuel cells (SOFCs)10.1016/j.jallcom.2006.07.110 ↗
14. Mobility of Sr in gadolinia doped ceria barrier layers prepared using spray pyrolysis, pulsed laser deposition and magnetron sputtering methods10.1149/2.0531602jes ↗
15. Low-temperature co-sintering for fabrication of zirconia/ceria bi-layer electrolyte via tape casting using a Fe2O3 sintering aid10.1016/j.jeurceramsoc.2017.05.018 ↗
16. Enhanced performance of gadolinia-doped ceria diffusion barrier layers fabricated by pulsed laser deposition for large-area solid oxide fuel cells10.1021/acsaem.8b00039 ↗
17. Effect of transition metal doping on the sintering and electrochemical properties of GDC buffer layer in SOFCs10.1111/ijac.13650 ↗
18. Five-layer reverse tape casting of IT-SOFC10.1111/ijac.13911 ↗
19. Gadolinia-doped ceria and yttria stabilized zirconia interfaces: regarding their application for SOFC technology10.1016/S1359-6454(00)00261-5 ↗
20. Solid oxide fuel cells with bi-layered electrolyte structure10.1016/j.jpowsour.2007.10.021 ↗
21. High performing and durable anode-supported solid oxide fuel cell by using tape casting, lamination and Co-firing method10.1149/09101.0373ecst ↗
22. Sintering and ionic conductivity of 8YSZ and CGO10 electrolytes with small addition of Fe2O3: a comparative study10.1016/j.ijhydene.2009.06.042 ↗
23. Reduced-temperature firing of solid oxide fuel cells with zirconia/ceria bi-layer electrolytes10.1016/j.jpowsour.2014.03.025 ↗
24. The effect of fabrication conditions for GDC buffer layer on electrochemical performance of solid oxide fuel cells10.1007/BF03353744 ↗
25. High proton conduction in grain-boundary-free yttrium-doped barium zirconate films grown by pulsed laser deposition10.1038/nmat2837 ↗
26. Input of atomic layer deposition for solid oxide fuel cell applications10.1039/c0jm00590h ↗
27. Microstructure and surface morphology of YSZ thin films deposited by e-beam technique10.1016/j.apsusc.2007.10.041 ↗
28. Anode-supported solid oxide fuel cell with yttria-stabilized zirconia/gadolinia-doped ceria bilalyer electrolyte prepared by wet ceramic co-sintering process10.1016/j.jpowsour.2006.08.024 ↗
29. Processing of 8YSZ and CGO thin film electrolyte layers for intermediate- and low-temperature SOFCs10.1016/j.jeurceramsoc.2014.11.017 ↗
30. Highly durable solid oxide fuel cells: suppressing chemical degradation via rational design of a diffusion-blocking layer10.1039/C8TA04974B ↗
31. Extremely thin bilayer electrolyte for solid oxide fuel cells (SOFCs) fabricated by chemical solution deposition (CSD)10.1002/adma.201200505 ↗
32. Slurry spin coating of thin film yttria stabilized zirconia/gadolinia doped ceria bi-layer electrolytes for solid oxide fuel cells10.1016/j.jpowsour.2016.07.080 ↗
33. Interface engineering of yttrium stabilized zirconia/gadolinium doped ceria bi-layer electrolyte solid oxide fuel cell for boosting electrochemical performance10.1016/j.jpowsour.2019.226776 ↗
34. Preparation and evaluation of doped ceria interlayer on supported stabilized zirconia electrolyte SOFCs by wet ceramic processes10.1016/j.ssi.2004.06.017 ↗
35. Shape identification and particles size distribution from basic shape parameters using ImageJ10.1016/j.compag.2008.02.007 ↗
36. Flexible polyurethane foams as templates for cellular glass–ceramics10.1016/j.jmatprotec.2009.03.021 ↗
37. Sr and Zr diffusion in LSCF/10GDC/8YSZ triplets for solid oxide fuel cells (SOFCs)10.1016/j.jpowsour.2014.02.046 ↗
38. Dependence of polarization in anode-supported solid oxide fuel cells on various cell parameters10.1016/j.jpowsour.2004.08.057 ↗
39. Performance and long term degradation of 7 W micro-tubular solid oxide fuel cells for portable applications10.1016/j.jpowsour.2015.03.030 ↗
40. Post-test characterization of a solid oxide fuel cell after more than 10 years of stack testing10.1016/j.jpowsour.2020.228770 ↗
41. Study on local morphological changes of nickel in solid oxide fuel cell anode using porous Ni pellet electrode10.1016/j.jpowsour.2010.08.047 ↗
42. Time-dependent performance of mixed-conducting SOFC cathodes10.1016/j.ssi.2006.06.021 ↗
43. Quantifying the performance evolution of solid oxide fuel cells during initial aging process10.1016/j.jpowsour.2021.230432 ↗
44. Ce0.8Gd0.2O2 − δ protecting layers manufactured by physical vapor deposition for IT-SOFC10.1016/j.ssi.2007.12.008 ↗
45. Cathode–electrolyte interfaces with CGO barrier layers in SOFC10.1111/j.1551-2916.2010.03763.x ↗
46. Effects of transition metal oxides on the densification of thin-film GDC electrolyte and on the performance of intermediate-temperature SOFC10.1016/j.ijhydene.2010.07.049 ↗