Mechanical properties of refractory castables bonded with hydratable magnesium carboxylate-boric acid

Abstract Hydratable magnesium carboxylate (HMC), which is similar to the properties of cement, can be used as a potential binder for refractory castables. However, its decomposition may lead to poor mechanical properties at medium temperatures (300 °C–1100 °C). This work investigated the effects of boric acid on the mechanical properties and microstructural evolution of castables bonded with hydratable magnesium carboxylate. The mechanical strength, bulk density, apparent porosity, thermal shock resistance, and sintering properties of the castables were evaluated. The results showed that the mechanical properties of HMC-bonded castables (HMCC) at various temperatures can be improved by adding boric acid. Boric acid reacts with HMC to form magnesium carboxylate borate ester (MCBE), which improves the bonding strength between HMC molecules. Thus, the cold modulus of rupture of HMCC containing boric acid dried at 110 °C are higher than that of calcium aluminate cement-bonded refractory castables (CACC). The decomposition temperature of MCBE is 77 °C higher than that of HMC, so MCBE can endow castables with better mechanical properties at 110 °C–500 °C. The B4C obtained by MCBE pyrolysis could form a boron-rich liquid phase, which can accelerate the structural densification of castables via transient liquid phase sintering, thus improving the mechanical properties of castables at 500 °C–1100 °C. Moreover, boric acid can improve the thermal shock resistance of HMCC. The residual strength rate first increases and then decreases with an increasing boric acid, and reaches a maximum value of 29.7% (1 wt% boric acid is added), which is 2.3 times that of the CACC. The nanoindentation test showed that the microcracks in the matrix of 1 wt% boric acid castables are easy to initiate but difficult to propagate, so the microcracks are many and wavy.