Enhanced toughness and strength of boron carbide ceramics with reduced graphene oxide fabricated by hot pressing
Source abstract
Abstract
Abstract Boron carbide (B4C) hybrids with different contents of graphene oxide (GO) were prepared by a heterogeneous co-precipitation method using cetyltrimethyl ammonium bromide (CTAB) as the cationic surfactant. The as-obtained mixtures were further hot-pressed at 1950 °C for 60 min under 30 MPa, by which B4C–reduced GO (rGO) composites were fabricated. It was found that the addition of only 0.5 wt% rGO could alter the predominance of trans-granular fracture in monolithic B4C ceramic material to mixed trans-granular and inter-granular modes in B4C–rGO composites. The flexural strength and fracture toughness of the B4C–2 wt% rGO were increased by 31% (from 350 to 455 MPa) and 83% (from 3.20 to 5.85 MPa·m1/2), respectively, compared with those of pure B4C. The improved mechanical properties are attributed to the mechanisms of pull-out and bridging of rGO and crack deflection, as evidenced by microstructural observations. The energy dissipation in the present B4C–rGO composites was further verified using two micromechanical models.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Boron and Carbon Nanomaterials Research · Graphene research and applications · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Interface interaction in the B4C/(Fe–B–C) system10.1016/j.msea.2007.06.100 ↗
2. Pressureless sintering of boron carbide with an addition of polycarbosilane10.1007/BF01160558 ↗
3. Microstructures and mechanical properties of B4C-SiC intergranular/intragranular nanocomposite ceramics fabricated from B4C, Si, and graphite powders10.1016/j.jeurceramsoc.2014.02.032 ↗
4. Electrical discharge machining of B4C–TiB2 composites10.1016/j.jeurceramsoc.2011.04.024 ↗
5. Microcracking in B4C-TiB2 composites10.1111/j.1151-2916.1995.tb08671.x ↗
6. Fabrication and characterization of B4C-based ceramic composites with different mass fractions of hexagonal boron nitride10.1016/j.ceramint.2014.07.042 ↗
7. Boron carbide-A comprehensive review10.1016/0955-2219(90)90048-K ↗
8. High-performance B4C-TiB2-SiC composites with tuneable properties fabricated by reactive hot pressing10.1016/j.jeurceramsoc.2019.04.001 ↗
9. Anisotropy in thermal properties of boron carbide–graphene platelet composites10.1016/j.jeurceramsoc.2015.11.030 ↗
10. Boron carbide/graphene platelet ceramics with improved fracture toughness and electrical conductivity10.1016/j.jeurceramsoc.2017.04.061 ↗
11. Effect of graphene platelets on tribological properties of boron carbide ceramic composites10.1016/j.ijrmhm.2016.11.015 ↗
12. Electrically conductive graphene nanoplatelet/boron carbide composites with high hardness and toughness10.1016/j.scriptamat.2015.12.008 ↗
13. Effect of graphene nano-platelet reinforcement on the mechanical properties of hot pressed boron carbide based composite10.1016/j.ceramint.2018.02.225 ↗
14. Graphene nanoplatelet reinforced boron carbide composites with high electrical and thermal conductivity10.1016/j.jeurceramsoc.2016.04.036 ↗
15. Graphene platelets enhanced pressureless-sintered B4C ceramics10.1098/rsos.171837 ↗
16. Mechanical properties of boron carbide-graphene platelet composites10.1016/j.ceramint.2015.09.139 ↗
17. Microstructure and properties of a graphene platelets toughened boron carbide composite ceramic by spark plasma sintering10.1016/j.ceramint.2018.05.188 ↗
18. Fabrication and characterization of synergistic Al-SiC-GNPs hybrid composites10.1016/j.compositesb.2018.07.035 ↗
19. Graphene encapsulated SiC nanoparticles as tribology-favoured nanofillers in aluminium composite10.1016/j.compositesb.2018.12.046 ↗
20. Anisotropic elastic moduli and internal friction of graphene nanoplatelets/silicon nitride composites10.1016/j.compscitech.2012.12.003 ↗
21. In-situ formed graphene nanoribbon induced toughening and thermal shock resistance of spark plasma sintered carbon nanotube reinforced titanium carbide composite10.1016/j.compositesb.2017.05.035 ↗
22. Toughening in graphene ceramic composites10.1021/nn200319d ↗
23. Enhancing toughness in boron carbide with reduced graphene oxide10.1111/jace.13943 ↗
24. Reduced-graphene-oxide-reinforced boron carbide ceramics fabricated by spark plasma sintering from powder mixtures obtained by heterogeneous co-precipitation10.1016/j.ceramint.2019.05.183 ↗
25. Creation of individual few-layer graphene incorporated in an aluminum matrix10.1016/j.compositesa.2018.06.008 ↗
26. Toughening in ceramics containing graphene fillers10.1016/j.ceramint.2014.03.150 ↗
27. Mencik · 1992
28. Fourier transform infrared spectroscopy in analysis of protein deposits10.1016/S0076-6879(99)09038-2 ↗
29. The dispersion of boron carbide powder in aqueous media10.1016/j.jeurceramsoc.2013.02.001 ↗
30. Enhanced mechanical properties of olefin block copolymer by adding a quaternary ammonium salt functionalized graphene oxide10.1039/C6RA11451B ↗
31. Unusual infrared-absorption mechanism in thermally reduced graphene oxide10.1038/nmat2858 ↗
32. Structural evolution during the reduction of chemically derived graphene oxide10.1038/nchem.686 ↗
33. Preparation and characterization of Boron carbide nanoparticles for use as a novel agent in T cell-guided boron neutron capture therapy10.1016/j.apradiso.2005.08.003 ↗
34. Evaluation of solution-processed reduced graphene oxide films as transparent conductors10.1021/nn700375n ↗
35. Highly conductive few-layer graphene/Al2O3 nanocomposites with tunable charge carrier type10.1002/adfm.201200632 ↗
36. Functionalized graphene sheets for polymer nanocomposites10.1038/nnano.2008.96 ↗
37. Graphene-based composite materials10.1038/nature04969 ↗
38. Enhanced mechanical properties of nanocomposites at low graphene content10.1021/nn9010472 ↗
39. Microstructure and mechanical properties of boron carbide/graphene nanoplatelets composites fabricated by hot pressing10.1016/j.ceramint.2019.12.007 ↗
40. Synthesis and properties of bulk graphene nanoplatelets consolidated by spark plasma sintering10.1016/j.carbon.2012.04.054 ↗
41. Spark plasma sintering and thermal conductivity of carbon nanotube bulk materials10.1063/1.1927286 ↗
42. Raman spectrum of graphene and raphene Layers10.1103/PhysRevLett.97.187401 ↗
43. Raman spectroscopy of graphene and graphite: disorder, electron–phonon coupling, doping and nonadiabatic effects10.1016/j.ssc.2007.03.052 ↗
44. Total color difference for rapid and accurate identification of graphene10.1021/nn800307s ↗
45. Quantifying defects in graphene via Raman spectroscopy at different excitation energies10.1021/nl201432g ↗
46. Reduced-graphene-oxide-reinforced boron carbide ceramics fabricated by spark plasma sintering from powder mixtures obtained by heterogeneous co-precipitation10.1016/j.ceramint.2019.05.183 ↗
47. Pressureless sintering of carbon-coated zirconium diboride powders10.1016/j.msea.2007.02.116 ↗
48. Microstructural characterization of commercial hot-pressed boron carbide ceramics10.1111/j.1551-2916.2005.00346.x ↗
49. Interfacial stress transfer in a graphene nanosheet toughened hydroxyapatite composite
50. Extraordinary toughening enhancement and flexural strength in Si3N4 composites using graphene sheets10.1016/j.jeurceramsoc.2013.08.039 ↗
51. Graphene nanoplatelet/silicon nitride composites with high electrical conductivity10.1016/j.carbon.2012.03.031 ↗
52. Synthesis of conducting graphene/Si3N4 composites by spark plasma sintering10.1016/j.carbon.2013.02.015 ↗
53. Hard and easy sinterable B4C-TiB2-based composites doped with WC10.1016/j.jeurceramsoc.2018.02.041 ↗
54. Effect of particle size, heating rate and CNT addition on densification, microstructure and mechanical properties of B4C ceramics10.1016/j.ceramint.2015.03.167 ↗
55. Enhanced fracture toughness of pressureless-sintered SiC ceramics by addition of graphene10.1016/j.jmst.2016.01.009 ↗
56. In-situ characterization of SiC–AlN multiphase ceramics10.1023/A:1004761308299 ↗
57. Whisker toughening: a comparison between aluminum oxide and silicon nitride toughened with silicon carbide10.1111/j.1151-2916.1990.tb06548.x ↗
58. Uniaxial tensile strength and fracture analysis of a hot-pressed boron carbide10.1016/j.jeurceramsoc.2019.01.031 ↗
59. Elastic properties of chemically derived single graphene sheets10.1021/nl801384y ↗
60. High temperature fracture of boron carbide: experiments and simple theoretical models10.1007/BF02403232 ↗