Influence of particle size distribution on the rheological properties and mathematical model fitting of injectable borosilicate bioactive glass bone cement
Source abstract
Abstract
Abstract Injectable bone cement combined with minimally invasive surgery has attracted much attention in recent years due to its rheological properties directly influencing its convenience and effectiveness in clinical applications. This study systematically investigates the influence of particle size distribution on the rheological, injectability, and anti-washout properties of borosilicate bioactive glass bone cement (BSBGC). Meanwhile, the setting time is also evaluated. Furthermore, a rheological model is proposed that describes the flow behaviour of BSBGC. Rheological results indicated that all the BSBGC samples exhibited non-Newtonian fluid behaviour, with thixotropic and shear-thinning properties. The BSBGC sample prepared via ball milling for 24 h (designated as CBM24) presented the largest thixotropic loop area, confirming that CBM24 has the greatest thixotropy. Particle size distribution greatly influenced the sol-gel time point, elastic and loss moduli, and viscosity of the BSBGC. Based on rheological results, four models (Ostwald–de Waele (Power law), Bingham, Herschel–Bulkley, and Casson) were selected and applied to fit the experimental data. It was found that the Power law and Herschel–Bulkley models were the most suitable for modelling the flow behaviour of the BSBGC, with the CBM24 sample having the greatest fitting proximity under the Power law model. Injectability test results showed that all BSBGC samples could be easily injected. Anti-washout test results indicated that CBM24 presented the most stable structure based on having the best anti-washout properties. Moreover, CBM24 had a reasonable initial and final setting time.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Spine and Intervertebral Disc Pathology · Endodontics and Root Canal Treatments
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Intravertebral body reconstruction with an injectable in situ-setting carbonated apatite: biomechanical evaluation of a minimally invasive technique10.1002/jor.1100170111 ↗
2. Rheological properties of calcium carbonate self-setting injectable paste10.1016/j.actbio.2009.08.032 ↗
3. Critical review: injectability of calcium phosphate pastes and cements10.1016/j.actbio.2016.11.019 ↗
4. Mechanical and rheological properties and injectability of calcium phosphate cement containing poly (lactic-co-glycolic acid) microspheres10.1016/j.msec.2009.02.021 ↗
5. The effect of the thermosensitive biodegradable PLGA-PEG-PLGA copolymer on the rheological, structural and mechanical properties of thixotropic self-hardening tricalcium phosphate cement10.3390/ijms20020391 ↗
6. Calcium phosphate-based composites as injectable bone substitute materials10.1002/jbm.b.31619 ↗
7. Rheological evaluations and in vitro studies of injectable bioactive glass-polycaprolactone-sodium alginate composites10.1007/s10856-016-5745-y ↗
8. Rheological characterization of concentrated aqueous β-tricalcium phosphate suspensions: the effect of liquid-to-powder ratio, milling time, and additives10.1016/j.actbio.2005.01.003 ↗
9. Injectability of calcium phosphate pastes10.1016/j.biomaterials.2004.05.010 ↗
10. The relationship between particle morphology and rheological properties in injectable nano-hydroxyapatite bone graft substitutes10.1016/j.msec.2017.02.170 ↗
11. Temperature and particle-size dependent viscosity data for water-based nanofluids-Hysteresis phenomenon10.1016/j.ijheatfluidflow.2007.02.004 ↗
12. Comparison of nanoparticular hydroxyapatite pastes of different particle content and size in a novel scapula defect model10.1038/srep43425 ↗
13. Influence of powder particle size distribution on complex viscosity and other properties of acrylic bone cement for vertebroplasty and kyphoplasty10.1002/jbm.b.30409 ↗
14. Injectability of calcium phosphate pastes: effects of particle size and state of aggregation of beta-tricalcium phosphate powders10.1016/j.actbio.2015.04.006 ↗
15. Ueber die Strömung einer elastischen Flüssigkeit durch eine Kapillare
16. Bingham · 1922
17. Konsistenzmessungen von Gummi-benzollösungen10.1007/BF01432034 ↗
18. Casson · 1959
19. Physical and rheological properties of the Chorfa dam mud: dependency on solids concentration10.1007/s13201-018-0805-8 ↗
20. Rheology of a primary and secondary sewage sludge mixture: dependency on temperature and solid concentration10.1016/j.biortech.2013.04.114 ↗
21. Bioactive glasses for in situ tissue regeneration10.1163/156856204323005352 ↗
22. Review of bioactive glass: from Hench to hybrids10.1016/j.actbio.2012.08.023 ↗
23. Silicate, borosilicate, and borate bioactive glass scaffolds with controllable degradation rate for bone tissue engineering applications. I. Preparation and in vitro degradation10.1002/jbm.a.32824 ↗
24. Bioactive glass in tissue engineering10.1016/j.actbio.2011.03.016 ↗
25. Physical, mechanical and in vitro biological evaluation of synthesized biosurfactant-modified silanated-gelatin/sodium alginate/45S5 bioglass bone tissue engineering scaffolds10.1080/09205063.2019.1675226 ↗
26. A novel injectable borate bioactive glass cement for local delivery of vancomycin to cure osteomyelitis and regenerate bone10.1007/s10856-013-5122-z ↗
27. Influence of powder particle size distribution on rheological properties of 316 L powder injection moulding feedstocks10.1016/j.powtec.2010.02.003 ↗
28. Nanocement produced from borosilicate bioactive glass nanoparticles composited with alginate10.1071/CH18410 ↗
29. FT-IR and Raman study of silver lead borate-based glasses10.1016/j.jnoncrysol.2007.01.066 ↗
30. Synthesis, characterisation and in vitro evaluation of sol-gel derived SiO2-P2O5-CaO-B2O3 bioactive system10.1016/j.ceramint.2014.02.025 ↗
31. The influence of polymeric component of bioactive glass-based nanocomposite paste on its rheological behaviors and in vitro responses: hyaluronic acid versus sodium alginate10.1002/jbm.b.33035 ↗
32. Rheological properties of Mg based feedstocks with micro or nano Al2O3 powder for injection molding
33. Temperature dependent steady and dynamic oscillatory shear rheological characteristics of Indian cow milk (Desi) ghee10.1007/s13197-018-3332-6 ↗
34. Rheological and mechanical properties of thermoresponsive methylcellulose/calcium phosphate-based injectable bone substitutes
35. Influence of anti-washout agents on the rheological properties and injectability of a calcium phosphate cement10.1002/jbm.b.30678 ↗
36. Novel injectable and self-setting composite materials for bone defect repair10.1007/s40843-019-1233-7 ↗
37. Injectable bone cements for use in vertebroplasty and kyphoplasty: state-of-the-art review10.1002/jbm.b.30398 ↗
38. Development of calcium phosphate/calcium sulfate biphasic biomedical material with hyaluronic acid containing collagenase and simvastatin for vital pulp therapy10.1016/j.dental.2020.03.018 ↗