journal article·2020-07

Enhanced mechanical properties of laminated ZrB2–SiC ceramics with porous Si3N4 interface

Zhen Liu, Chuncheng Wei, Peng Wang, Shuang Li, Xuefei Ma, Zhongya Zhang

Ceramics International· Volume 46· Issue 10
Publisher page

Abstract

Abstract In this study, bionic laminated ZrB2–SiC ceramics (LZNw) were fabricated using Si3N4 whiskers as an interface layer. The room-temperature flexural strength and fracture toughness of LZNw were determined to be 528 MPa and 15.3 MPa m1/2, respectively. With increasing testing temperature up to 1500 °C, the flexural strength of LZNw remained higher than that of monolithic ZrB2–SiC ceramics (ZS). Specifically, at the peak temperature of 1500 °C, the flexural strength of LZNw was as high as 380 MPa, while that of ZS dropped to 219 MPa. This outstanding high-temperature strength of LZNw can be ascribed to the porous structure of the Si3N4 whisker interface layer, which absorbs the glassy phase accumulated at the crack tip, and the stepped fracturing pattern, which hinders the flow of the glassy phase, thus avoiding the grain boundary sliding caused by the enrichment of the glassy phase.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Effect of surface oxidation on thermal shock resistance of ZrB2–SiC–ZrC ceramic at temperature difference from 800 to 1900 °C10.1016/j.corsci.2015.05.035 ↗
2. Effects of porous C/C density on the densification behavior and ablation property of C/C–ZrC–SiC composites10.1016/j.carbon.2013.01.059 ↗
3. Material property requirements for analysis and design of UHTC components in hypersonic applications10.1016/j.jeurceramsoc.2010.01.026 ↗
4. Effect of HfC and SiC on microstructure and mechanical properties of HfB2-based ceramics10.1016/j.ceramint.2016.01.067 ↗
5. Fabrication and characterization of precursor–derived non–oxide ZrC–SiC multiphase ultrahigh temperature ceramics10.1016/j.jeurceramsoc.2016.06.047 ↗
6. Effect of high temperature oxidation on the radiative properties of HfC-based ceramics10.1016/j.corsci.2017.07.007 ↗
7. Toughening of laminated ZrB2–SiC ceramics with residual surface compression10.1016/j.jeurceramsoc.2011.05.024 ↗
8. The fabrication and mechanical properties of SiC/ZrB2 laminated ceramic composite prepared by spark plasma sintering10.1016/j.ceramint.2012.02.098 ↗
9. Bioinspired high toughness graphene/ZrB2 hybrid composites with hierarchical architectures spanning several length scales10.1016/j.carbon.2016.05.074 ↗
10. Improving high temperature properties of hot pressed ZrB2–20vol%SiC ceramic using high purity powders10.1016/j.ceramint.2012.06.018 ↗
11. Effects of temperature and the incorporation of W on the oxidation of ZrB2 ceramics
12. Mechanical and ablation properties of laminated ZrB2–SiC/BN ceramics10.1016/j.jallcom.2015.03.097 ↗
13. Enhanced thermal shock resistance of ultra-high temperature ceramic by biomimetic surface modification10.1039/C4TA05589F ↗
14. High temperature mechanical properties of laminated ZrB2–SiC based ceramics10.1016/j.ceramint.2016.08.129 ↗
15. Effect of interlayer on the ablation properties of laminated HfC–SiC ceramics under oxyacetylene torch10.1016/j.corsci.2015.01.021 ↗
16. Oxidation behaviour of a continuous carbon fifibre reinforced ZrB2–SiC composite
17. Oxidation behaviour of laminated BN/ZrB2–SiC ceramics10.1016/j.ceramint.2018.02.029 ↗
18. Silicon nitride for high-temperature applications10.1111/j.1551-2916.2010.03839.x ↗
19. Fracture toughness and R-curve behavior of laminated ZrB2–SiC/SiCw ceramics10.1016/j.jallcom.2018.12.304 ↗
20. Strong ZrB2–SiC–WC ceramics at 1600 °C10.1111/j.1551-2916.2011.05062.x ↗
21. A simple way to make tough ceramics10.1038/347455a0 ↗
22. Development and characterization by HRTEM of hot-pressed Si3N4–SiC(w) composites10.1016/j.jmatprotec.2005.03.025 ↗
23. Microstructure, mechanical properties and thermal shock resistance of hot-pressed ZrO2(3Y)–BN composites10.1016/j.msea.2008.06.038 ↗
24. Laminar ceramic composites10.1016/0955-2219(95)93055-8 ↗
25. Effect of graphite flake on microstructure as well as mechanical properties and thermal shock resistance of ZrB2–SiC matrix ultrahigh temperature ceramics10.1016/j.jallcom.2009.04.109 ↗
26. Apparent fracture toughness of Si3N4-based laminates with residual compressive or tensile stresses in surface layers10.1016/j.actamat.2004.09.022 ↗
27. Microstructure and mechanical properties of three porous Si3N4 ceramics fabricated by different techniques10.1016/j.msea.2012.03.114 ↗
28. Design and production of ceramic laminates with high mechanical resistance and reliability10.1016/j.actamat.2006.06.019 ↗
29. High-temperature deformation of ZrB2 ceramics with WC additive in four-point bending10.1016/j.ijrmhm.2011.05.006 ↗
30. Mechanical enhancement of lightweight ZrB2-modified carbon-bonded carbon fiber composites with self-grown carbon nanotubes10.1016/j.carbon.2016.02.077 ↗
31. Grain-boundary relaxation in high-purity silicon nitride10.1111/j.1151-2916.1996.tb08968.x ↗