Effect of partial crystallization of an amorphous layer on the mechanical properties of ceramic/metal-glass coating by thermal spraying
Source abstract
Abstract
Abstract On the basis of successful preparation of amorphous-ceramic composite coating by atmospheric plasma spraying, a nanostructure bond-coat was prepared in-situ by inducing partial crystallization of an amorphous layer through heat treatment. The unit mechanics contribution rate (UMCR) was proposed to evaluate the mechanical properties of the coating, and the interference of the substrate to the evaluation of the coating mechanical properties was removed. In this work, the mechanical properties of the coating were systematically evaluated at the macroscopic, mesoscopic and microscopic scales through three-point bending (3 PB), microhardness and nanoindentation tests, respectively. Results show that the nanoparticle-ceramic coatings formed by heat treatment have a higher hardness and Young's modulus. The mechanical properties at the micro scale were obviously better than those at the macro scale. A partial crystallization was observed in the amorphous bond-coats in the process of heat treatment, and a large number of nanoparticles and solid solution were formed in the nanoparticle-ceramic coatings, effectively hindering the crack growth and improving the coating performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Metallic Glasses and Amorphous Alloys · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Nanocrystallization during nanoindentation of a bulk amorphous metal alloy at room temperature10.1126/science.1067453 ↗
2. Deformation-induced nanocrystal formation in shear bands of amorphous alloys10.1038/367541a0 ↗
3. Synthesis and properties of metallic glasses that contain aluminum10.1126/science.241.4873.1640 ↗
4. Thermodynamic stability of amorphous oxide films on metals: application to aluminum oxide films on aluminum substrates10.1103/PhysRevB.62.4707 ↗
5. Structural ordering of ultra-thin, amorphous aluminium-oxide films10.1016/j.susc.2005.05.051 ↗
6. Fracture behaviour of ceramic–metallic glass gradient transition coating10.1016/j.ceramint.2018.12.015 ↗
7. Metallic glasses as structural materials10.1016/j.scriptamat.2005.09.051 ↗
8. Recent development and application products of bulk glassy alloys10.1016/j.actamat.2010.11.027 ↗
9. Microstructure and electrochemical behavior of Fe-based amorphous metallic coatings fabricated by atmospheric plasma spraying10.1007/s11666-010-9570-4 ↗
10. A novel composite-layered coating enabling self-enhancing thermal barrier performance10.1016/j.scriptamat.2019.01.010 ↗
11. Microstructure and thermal cycling behavior of plasma-sprayed LaMgAl11O19 coatings10.1016/j.ceramint.2017.12.202 ↗
12. On the interplay between adhesion strength and tensile properties of thermal spray coated laminates—Part I: high velocity thermal spray coatings10.1007/s11666-018-0695-1 ↗
13. Gaseous material capacity of open plasma jet in plasma spray-physical vapor deposition process10.1016/j.apsusc.2017.09.218 ↗
14. Thermodynamic conditions for cluster formation in supersaturated boundary layer during plasma spray-physical vapor deposition10.1016/j.apsusc.2018.12.070 ↗
15. Transport and deposition behaviors of vapor coating materials in plasma spray-physical vapor deposition10.1016/j.apsusc.2019.04.224 ↗
16. Structure and thermal properties of Al2O3-doped Gd3TaO7 as potential thermal barrier coating10.1016/j.jeurceramsoc.2019.02.002 ↗
17. Durable TBCs with self-enhanced thermal insulation based on co-design on macro- and microstructure10.1016/j.apsusc.2019.03.309 ↗
18. Calcium-magnesium-alumino-silicate induced degradation and failure of La2(Zr0.7Ce0.3)2O7/YSZ double-ceramic–layer thermal barrier coatings prepared by electron beam-physical vapor deposition10.1016/j.jeurceramsoc.2017.10.057 ↗
19. Understanding of degradation-resistant behavior of nanostructured thermal barrier coatings with bimodal structure10.1016/j.jmst.2018.09.054 ↗
20. Preparation, structure, mechanical properties and thermal cycling behavior of porous LaMgAl11O19 coating10.1016/j.jallcom.2018.04.097 ↗
21. Mechanical properties, thermal expansion performance and intrinsic lattice thermal conductivity of AlMO4(M=Ta,Nb) ceramics for high-temperature applications10.1016/j.ceramint.2018.12.135 ↗
22. Hot corrosion behaviour of La2(Zr0.7Ce0.3)2O7 thermal barrier coating ceramics exposed to molten calcium magnesium aluminosilicate at different temperatures10.1016/j.corsci.2015.08.031 ↗
23. La2(Zr0.7Ce0.3)2O7 thermal barrier coatings prepared by electron beam-physical vapor deposition that are resistant to high temperature attack by molten silicate10.1016/j.corsci.2016.11.015 ↗
24. Cleavage cracking of ductile-metal substrates induced by brittle coating fracture10.1016/j.actamat.2018.04.017 ↗
25. Thermal‐cycle dependent residual stress within the crack‐susceptible zone in thermal barrier coating system10.1111/jace.15699 ↗
26. Damage growth triggered by interface irregularities in thermal barrier coatings10.1016/j.actamat.2009.01.022 ↗
27. Competition mechanism of interfacial cracks in thermal barrier coating system10.1016/j.matdes.2017.07.018 ↗
28. Modelling the influence of reactive elements on the work of adhesion between a thermally grown oxide and a bond coat alloy10.1002/maco.200503928 ↗
29. Improved the durability of thermal barrier coatings with interface modified by three-dimensional mesh patterns10.1111/jace.14360 ↗
30. Laser surface patterning to enhance adhesion of plasma sprayed coatings10.1016/j.surfcoat.2015.07.022 ↗
31. Heat-induced interface-coupling behaviour of thermally sprayed Cu/ceramic coatings10.1016/j.ceramint.2018.03.212 ↗
32. Enhanced interface adhesion by in-situ oxidation within metal-ceramic coatings10.1016/j.ceramint.2018.08.332 ↗
33. Plastic metallic-barrier layer for crack propagation within plasma-sprayed Cu/ceramic coatings10.1016/j.surfcoat.2018.12.124 ↗
34. Combined pre-annealing and pre-oxidation treatment for the processing of thermal barrier coatings on NiCoCrAlY bond coatings10.1016/j.surfcoat.2006.07.253 ↗
35. Development of a pre-oxidation treatment to improve the adhesion between thermal barrier coatings and NiCoCrAlY bond coatings10.1007/s11085-006-9036-8 ↗
36. Modeling of residual stresses in a plasma-sprayed zirconia/alumina functionally graded-thermal barrier coating10.1016/S0040-6090(03)00427-9 ↗
37. Plasma-sprayed nanostructured YSZ thermal barrier coatings: thermal insulation capability and adhesion strength10.1016/j.ceramint.2017.03.074 ↗
38. Microstructure and fracture toughness of in-situ nanocomposite coating by thermal spraying of Ti3AlC2/Cu powder10.1016/j.ceramint.2019.03.246 ↗
39. Formation and corrosion behavior of Fe-based amorphous metallic coatings by HVOF thermal spraying10.1016/j.surfcoat.2009.08.025 ↗
40. Microstructure and thermal conductivity of wire-arc sprayed FeCrNbBSiC amorphous coating10.1016/j.jallcom.2019.02.275 ↗
41. Formation, stability and ultrahigh strength of novel nanostructured alloys by partial crystallization of high-entropy (Fe0.25Co0.25Ni0.25Cr0.125Mo0.125)86‒89B11‒14 amorphous phase10.1016/j.actamat.2019.03.019 ↗
42. Assessment of elastic properties of coatings by three-point bending and nanoindentation10.1007/s11998-010-9313-y ↗
43. Strain-induced multiscale structural changes in lamellar thermal barrier coatings10.1016/j.ceramint.2016.11.009 ↗
44. Relationships between the microstructure and properties of thermally sprayed deposits10.1361/105996302770348754 ↗
45. nanoindentation-based study of the mechanical behavior of bulk supercrystalline ceramic-organic nanocomposites10.1016/j.jeurceramsoc.2019.03.053 ↗
46. Reaction sintering of aluminium titanate: I—effect of MgO addition10.1016/0955-2219(94)90018-3 ↗